LIGHT MY BRICKS 75292 Operating instructions

INSTALLATION GUIDE 1THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE

Light My Bricks LEGO® Star Wars

The Razor Crest 75292

Light Kit Installation Guide

INSTALLATION GUIDE 2THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE

Hi There, we’re Light My Bricks!

We’re here to help you get started on

the LEGO® Star Wars The Razor Crest

(75292) Lighting Kit.

This PDF details the instructions for the

LED light kit only. If you are wishing to

purchase this LED Lighting Kit , please

click here to view the product page.

If you run into any issues, please refer

to the troubleshooting section towards

the end of this guide.

Have fun and enjoy!

PACKAGE CONTENTS

PACKAGE CONTENTS:

6 × White 30cm Bit Lights

2 x Cool White 30cm Bit Lights

2 x Red 30cm Bit Lights

2 x Warm White 30cm Large Bit Lights

1 x Warm White Strip Light

1 x 12-Port Expansion Board

1 x NC Push Board

1 x Gun Effects Board

1 x Flicker Effects Board

1 x 5cm Connecting Cable

3 x 15cm Connecting Cables

1 x USB Power Cable

LEGO PIECES:

6 × Trans Clear Round Plate 1x1

2 × Trans Red Round Plate 1x1

2 × Black/Grey Plate 1x2

1 × Plate 1x6 (Any Colour)

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 3

Contents 4. Before You Begin

8. Instructions

24. Final Product

25. Troubleshooting

30. Contact

CONTENTS

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 4

LAYING CABLES IN BETWEEN

AND UNDERNEATH BRICKS

Cables can t in between and

underneath LEGO® bricks, plates, and

tiles providing they are laid correctly

between the LEGO® studs. Do NOT

forcefully join LEGO® together around

cables; instead ensure they are laying

comfortably in between each stud.

CAUTION: Forcing LEGO® to connect

over a cable can result in damaging

the cable and light.

CONNECTING CABLE CONNECTORS

TO EXPANSION BOARDS

Take extra care when inserting

connectors to ports of Expansion

Boards. Connectors can be inserted

only one way. With the expansion

board facing up, look for the soldered

“=” symbol on the left side of the port.

The connector side with the wires

exposed should be facing toward the

soldered “=” symbol as you insert into

the port. If a plug won’t t easily into

a port connector, do not force it.

Incorrectly inserting the connector

can can result in bent pins inside the

port or possible overheating of the

expansion board when connected.

Before You Begin

BEFORE YOU BEGIN

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 5

CONNECTING CABLE CONNECTORS

TO STRIP LIGHTS

Take extra care when inserting

connectors to ports on the Strip

Lights. Connectors can be inserted

only one way. With the Strip Light

facing up, ensure the side of the

connector with the wires exposed is

facing down. If a plug won’t t easily

into a port connector, don’t force it.

Doing so will damage the plug and

the connector.

CONNECTING MICRO CABLE

CONNECTORS TO MICRO

EXPANSION BOARD PORTS

Take extra care when inserting the

micro connectors to micro ports of

Micro Expansion Boards. Connecting

Micro Bit Lights to Micro Expansion

Boards is similar to connecting lights

and cables to Strip Lights. With the

expansion board facing up, ensure the

side of the connector with the wires

exposed is facing down. If a plug won’t

t easily into a port connector, do not

force it. Use your ngernail to push

the plastic part of the connector to the

micro port.

Before You Begin

BEFORE YOU BEGIN

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 6

INSTALLING BIT LIGHTS UNDER

LEGO® BRICKS AND PLATES

When installing Bit Lights under

LEGO® pieces, ensure they are placed

the correct way up (Yellow LED

component exposed). You can either

place them directly on top of LEGO®

studs or in between.

Before You Begin

BEFORE YOU BEGIN

INSTALLATION GUIDE 7THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE

Instructions To ensure a smooth

installation of your light kit,

please read and follow each

step carefully.

If you run into any issues,

please refer to the online

troubleshooting guide.

STEPS

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 8

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

12

STEPS

Cool White 30cm Bit Light

x2

Trans Clear Round Plate 1x1

x2

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 9

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

3 4

STEPS

White 30cm Bit Light

x2

Trans Red Round Plate 1x1

x2

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 10

5

STEPS

12-Port Expansion Board 6

USB Power Cable

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

Connect to a USB

Power Bank or Wall

Adaptor

(each sold separately)

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 11

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

7

STEPS

Red 30cm Bit Light

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 12

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

8

STEPS

Gun Effects Board

Red 30cm Bit Light

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 13

9

STEPS

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

15cm Connecting Cable

Ensure the cable is

connected to the

OUT port (+5v)

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 14

10

STEPS

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

White 30cm Bit Light

x2

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

Trans Clear Round Plate 1x1

x2

x 2

11

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 15

12

STEPS

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

White 30cm Bit Light

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 16

13

STEPS

Trans Clear Round Plate 1x1

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

White 30cm Bit Light

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 17

14

STEPS

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

Flicker Effects Board

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

Trans Clear Round Plate 1x1

Connecting Cable 15cm

Ensure the cable is

connected to the

IN port

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 18

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

STEPS

15

Warm White 30cm

Large Bit Light

x 2

Ensure the cable is

connected to one

of the OUT ports

16

THE RAZOR CREST 75292 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 19STEPS

17 18

Plate 1 x 2

Ensure the cable is

connected to one

of the OUT ports

Plate 1 x 2

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.