LIGHT MY BRICKS 10278 Operating instructions

INSTALLATION GUIDE 1LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE

Light My Bricks LEGO® Police Station 10278

Light Kit Installation Guide

INSTALLATION GUIDE 2LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE

Hi There, we’re Light My Bricks!

We’re here to help you get started on

the LEGO® Police Station (10278)

Lighting Kit.

This PDF details the instructions for the

LED light kit only. If you are wishing to

purchase this LED Lighting Kit , please

click here to view the product page.

Before you begin, please check that

you have all the correct quantities

of components as per the package

contents listing.

Have fun and enjoy!

PACKAGE CONTENTS

PACKAGE CONTENTS:

5 x White 30cm Bit Lights

6 x White 15cm Bit Lights

4 x Green 30cm Bit Lights

1 x Pink 30cm Bit Lights

1 x Flashing Red 30cm Bit Lights

1 x White Lamp Post w Bit Light Installed

7 x White Strip Lights

1 x 6-Port Expansion Board

1 x 8-Port Expansion Board

1 x 12-Port Expansion Board

4 x 15cm Connecting Cables

2 x 30cm Connecting Cables

3 × Wireless Power Connectors

6 x Adhesive Squares

1 × USB Power Cable

(Power Source not included, sold separately)

LEGO PIECES:

7 × Plate 1x6 (Any Colour)

2 × Black Round Plate 1x1 w open stud

1 × Light Bluish Grey Round Plate 1x1 w open stud

1 × Dark Bluish Grey Tile 1x1

2 × Dark Bluish Grey Tile 1x2

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 3

Contents 4. Before You Begin

8. Instructions

44. Final Product

45. Troubleshooting

50. Contact

CONTENTS

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 4

LAYING CABLES IN BETWEEN

AND UNDERNEATH BRICKS

Cables can t in between and

underneath LEGO® bricks, plates, and

tiles providing they are laid correctly

between the LEGO® studs. Do NOT

forcefully join LEGO® together around

cables; instead ensure they are laying

comfortably in between each stud.

CAUTION: Forcing LEGO® to connect

over a cable can result in damaging

the cable and light.

CONNECTING CABLE CONNECTORS

TO EXPANSION BOARDS

Take extra care when inserting

connectors to ports of Expansion

Boards. Connectors can be inserted

only one way. With the expansion

board facing up, look for the soldered

“=” symbol on the left side of the port.

The connector side with the wires

exposed should be facing toward the

soldered “=” symbol as you insert into

the port. If a plug won’t t easily into

a port connector, do not force it.

Incorrectly inserting the connector

can can result in bent pins inside the

port or possible overheating of the

expansion board when connected.

Before You Begin

BEFORE YOU BEGIN

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 5

CONNECTING CABLE CONNECTORS

TO STRIP LIGHTS

Take extra care when inserting

connectors to ports on the Strip

Lights. Connectors can be inserted

only one way. With the Strip Light

facing up, ensure the side of the

connector with the wires exposed is

facing down. If a plug won’t t easily

into a port connector, don’t force it.

Doing so will damage the plug and

the connector.

CONNECTING MICRO CABLE

CONNECTORS TO MICRO

EXPANSION BOARD PORTS

Take extra care when inserting the

micro connectors to micro ports of

Micro Expansion Boards. Connecting

Micro Bit Lights to Micro Expansion

Boards is similar to connecting lights

and cables to Strip Lights. With the

expansion board facing up, ensure the

side of the connector with the wires

exposed is facing down. If a plug won’t

t easily into a port connector, do not

force it. Use your ngernail to push

the plastic part of the connector to the

micro port.

Before You Begin

BEFORE YOU BEGIN

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 6

INSTALLING BIT LIGHTS UNDER

LEGO® BRICKS AND PLATES

When installing Bit Lights under

LEGO® pieces, ensure they are placed

the correct way up (Yellow LED

component exposed). You can either

place them directly on top of LEGO®

studs or in between.

Before You Begin

BEFORE YOU BEGIN

INSTALLATION GUIDE 7LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE

Instructions To ensure a smooth

installation of your light kit,

please read and follow each

step carefully.

If you run into any issues,

please refer to the online

troubleshooting guide.

STEPS

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 8

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

1

STEPS

White Lamp Post

w/ Bit Light Installed

2

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 9

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

STEPS

3

Dark Bluish Grey Tile 1x2

White 15cm Bit Light

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 10

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

STEPS

12-Port Expansion Board

54

Connect the White

15cm Bit Light and

the Lamp Post Cable

to the expansion

board

USB Power Cable

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 11

6

STEPS

Connect to a USB

Power Bank, USB

Battery Pack or

USB Wall Adaptor

(each sold separately)

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 12

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

7

STEPS

White 30cm Bit Light

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 13

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

8

STEPS

9

White 30cm Bit Light x 2

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 14

11

STEPS

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

10

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 15

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

12 13

STEPS

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 16

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

14

15

STEPS

Green 30cm Bit Light

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 17

16

STEPS

Pink 30cm Bit Light

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 18

17

STEPS

15cm Connecting Cable

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

White Strip Light

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 19

18

STEPS

19

White 30cm Bit Light

Connect the 2x White

30cm Bit Lights and the

15cm Connecting Cable

to the expansion board

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 20

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

STEPS

20

Page is loading ...

LIGHT MY BRICKS 10278 Operating instructions

LIGHT MY BRICKS 10278 Operating instructions

Related papers

Other documents