LIGHT MY BRICKS 21324 Operating instructions

INSTALLATION GUIDE 1LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE

Light My Bricks LEGO® 123 Sesame Street

21324 Light Kit Installation

Guide

INSTALLATION GUIDE 2LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE

Hi There, we’re Light My Bricks!

We’re here to help you get started on

the LEGO® 123 Sesame Street (21324)

Lighting Kit.

This PDF details the instructions for the

LED light kit only. If you are wishing to

purchase this LED Lighting Kit , please

click here to view the product page.

If you run into any issues, please refer

to the troubleshooting section towards

the end of this guide.

Have fun and enjoy!

PACKAGE CONTENTS

PACKAGE CONTENTS:

8 x White 30cm Bit Lights

2 x White 15cm Bit Lights

4 x Warm White 30cm Large Bit Lights

1 x Green Lamp Post w Large Bit Light Installed

2 x 6-Port Expansion Boards

1 x 8-Port Expansion Board

2 x 15cm Connecting Cables

1 x USB Power Cable

6 x Adhesive Squares

LEGO PIECES:

3 × Trans Clear 2x2 Plate w Rounded Bottom

1 × White Round Plate 1x1 w open stud

1 × Trans Dark Green Round Plate 1x1

1 × Green Round Brick 1x1

2 × Black Round Plate 1x1 w open stud

2 × Black Arm Skeleton, Bent w Clips (Horizontal

Grip)

 4×Black1×1ModiedPlateRoundedwithHandle

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 3

Contents 4. Before You Begin

8. Instructions

31. Final Product

32. Troubleshooting

37. Contact

CONTENTS

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 4

LAYING CABLES IN BETWEEN

AND UNDERNEATH BRICKS

Cables can t in between and

underneath LEGO® bricks, plates, and

tiles providing they are laid correctly

between the LEGO® studs. Do NOT

forcefully join LEGO® together around

cables; instead ensure they are laying

comfortably in between each stud.

CAUTION: Forcing LEGO® to connect

over a cable can result in damaging

the cable and light.

CONNECTING CABLE CONNECTORS

TO EXPANSION BOARDS

Take extra care when inserting

connectors to ports of Expansion

Boards. Connectors can be inserted

only one way. With the expansion

board facing up, look for the soldered

“=” symbol on the left side of the port.

The connector side with the wires

exposed should be facing toward the

soldered “=” symbol as you insert into

the port. If a plug won’t t easily into

a port connector, do not force it.

Incorrectly inserting the connector

can can result in bent pins inside the

port or possible overheating of the

expansion board when connected.

Before You Begin

BEFORE YOU BEGIN

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 5

CONNECTING CABLE CONNECTORS

TO STRIP LIGHTS

Take extra care when inserting

connectors to ports on the Strip

Lights. Connectors can be inserted

only one way. With the Strip Light

facing up, ensure the side of the

connector with the wires exposed is

facing down. If a plug won’t t easily

into a port connector, don’t force it.

Doing so will damage the plug and

the connector.

CONNECTING MICRO CABLE

CONNECTORS TO MICRO

EXPANSION BOARD PORTS

Take extra care when inserting the

micro connectors to micro ports of

Micro Expansion Boards. Connecting

Micro Bit Lights to Micro Expansion

Boards is similar to connecting lights

and cables to Strip Lights. With the

expansion board facing up, ensure the

side of the connector with the wires

exposed is facing down. If a plug won’t

t easily into a port connector, do not

force it. Use your ngernail to push

the plastic part of the connector to the

micro port.

Before You Begin

BEFORE YOU BEGIN

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 6

INSTALLING BIT LIGHTS UNDER

LEGO® BRICKS AND PLATES

When installing Bit Lights under

LEGO® pieces, ensure they are placed

the correct way up (Yellow LED

component exposed). You can either

place them directly on top of LEGO®

studs or in between.

Before You Begin

BEFORE YOU BEGIN

INSTALLATION GUIDE 7LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE

Instructions To ensure a smooth

installation of your light kit,

please read and follow each

step carefully.

If you run into any issues,

please refer to the online

troubleshooting guide.

STEPS

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 8

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

1

STEPS

Green Lamp Post w Large

Bit Light Installed

Green Round Brick 1x1

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 9

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

2 3

STEPS

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 10

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

4

STEPS

8-Port Expansion Board

White 30cm Bit Light

Trans Dark Green Round

Plate 1x1

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 11

5

6

STEPS

USB Power Cable

Connect to a USB

Power Bank, USB to

AA Battery Pack or

Wall Adaptor

(each sold separately)

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 12

7

STEPS

8

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

White 30cm Bit Light

x2

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 13

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

9

STEPS

10

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 14

11

STEPS

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 15

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

12 13

STEPS

Trans Clear Plate 2x2 w

Rounded Bottom

White 30cm Bit Light

Warm White 30cm Large Bit Light

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 16

14 15

STEPS

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 17

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

16

17

STEPS

15cm Connecting Cable

Adhesive Squares x 2

6-Port Expansion Board

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 18

18

STEPS

White Round Plate 1x1 w

Open Stud

Warm White 30cm Large Bit Light

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 19

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

19

STEPS

20

White 30cm Bit Light

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 20STEPS

Black 1×1 Mod Plate Rounded w Handle x2

Black Round Plate 1x1 w open stud

Black Arm Skeleton, Bent w Clips

21 White 30cm Bit Light

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

Page is loading ...

LIGHT MY BRICKS 21324 Operating instructions

LIGHT MY BRICKS 21324 Operating instructions

Related papers

Other documents