Page is loading ...
Instruction Manual for
Wheel Loader
3D Wind-Up Desktop Racer
Read through this entire instruction manual
BEFORE using Wheel Loader 3D Wind-Up
We’re dedicated to bringing you well-designed
products that make living fun and easy. We stand
behind all our products and warrant this to be free
from defects in workmanship and materials for 30
days from the date of purchase.
For service claims or questions please consult our
website ProtocolNY.com.
Images may vary from actual product.
Desktop Racer.
1
2
3
4
5
6
7
8
A2 + A3 + B1
Attach pieces A2 and A3 onto pieces B1.
Note: Make sure all pieces are pressed in all
the way in order to securely interlock and
leave room for other pieces.
+X
Attach motor X by sliding the metal ends
into the corresponding holes in piece B2.
B4 + C4
Attach B4 to C4 by sliding them together
as pictured.
Combine the structure from step 3 with the
structure from step 2.
B5 + B6 + C6
Align pieces B6 and C6. Insert pieces B5
through the holes. Connect the C5 pieces
as shown.
Combine the structure from step 5 with the
structure from step 4.
+ C1
Add side piece C1, to mirror side piece B1.
B7 + C7
Add pieces B7 and C7 to each side.
Use the awl to punch out all of the pieces (E).
Follow the instructions step by step.
9
10
A8 + B9 + C9
Attach pieces B9 and C9 to piece A8.
C10 + B11 + C11
Attach pieces B10
using pieces B11,
and pieces C10
using pieces C11.
11 B12 + C12
Attach structures from
steps 9 and 10.
Then attach pieces
B12 and C12.
12 Combine structures from steps 8 and 11.
13 A14 + B13 + B15 +C13 + C15
Gently bend and fold pieces A14, B13, B15, C13,
and C15.
Fig. 3.
14 + W
Attach and combine structures
from step13 with parts B16
and C16.
15 Combine structures from steps 12 and 14.
16 Fold piece A17.
17 Combine structures from steps 15 +16.
18 + A20
Gently bend and fold piece A18 and attach.
19 + W
Combine structure from
step 18 with wheels W.
20 + A19
Combine structure from
step 19 with piece A19.
21 + A20
Bend piece A20 and add to
the front of the structure from
step 20.
22
23 B22 + C22
Add pieces B22 and C22 to the piece A21
from step 22.
24 Add pieces B23 and C23 to the structure
from step 23.
25 Combine structures from steps
21 and 24 by attaching the
shovel to the front of the
wheel loader (pieces B5
and B6, from step 5).
26 Secure structures from step 25 by
combining pieces B24 and C24 so they
lock together.
27 A25 + A26
Combine pieces A25 and 26 so they interlock.
Combine structure from step 27 by adding
it to the structure from step 26.
28
Puzzle complete!
Wind motor to start racing.
+ A20
Gently bend and fold piece A21.
/