2. Protocol
  3. 6312-1A Shovel+

Protocol 6312-1A Shovel+ User manual

  • Hello! I have reviewed the Instructions for Use document for the PROTOCOL Shovel Plus 4-in-1 Emergency Multi Tool. This document describes how to install and use the shovel, ax, and saw, which are stored in a carry case. The saw is held in the handle while the tool is not in use. I am ready to assist you with any questions you might have about this device.
  • What tools are included in the box?
    Where is the saw located when the box is opened?
    How do you install the ax or shovel onto the handle?
    Is there an additional locking mechanism for the ax?
    How do you remove the tools?
Patent pending
PROTOCOL®, MULTISMART™ is a trademark of Protocol, New York, NY 10107
Package design, trademarks and all copy © Protocol. All Rights Reserved.
For warranty details see www.protocolny.com.
SHOVEL
Check out Protocol’s other fantastic new tools at ProtocolNY.com!
INSTRUCTIONS FOR USE
1. When opening the box, the shovel and ax heads are loose. The saw is packed in
the handle.
2. The saw must remain in the handle in order to use the ax or shovel. To install, push
the ax or shovel onto the handle making sure it locks into place (Fig. 1).
3. For the Ax, there is an additional locking screw to keep it sturdy (Fig. 2).
4. To remove, push in the button while pulling the ax or shovel.
5. To remove the saw, press the button while pulling the saw out.
6. Then push the saw into the handle making sure it locks into place.
7. All tools store neatly in the included carry case. Please note the saw must store in
the handle in order to fit.
We’re dedicated to bringing you well-designed products that make living fun and easy. We stand
behind all our products and warrant this to be free from defects in workmanship and materials for 1
year from the date of purchase.
For service claims or questions please consult our website ProtocolNY.com.
SHOVEL
PLUS
4-in-1 Emergency Multi Tool
AX
SAW
NAIL
REMOVER
HANGING
LOOP
FIG. 1 FIG. 2
6312-1A_ShovelPlus_IM
/