Instruction Manual for
Beast Mover
3D Wind-Up Desktop Racer
Read through this entire instruction manual
BEFORE using Beast Mover 3D Wind-Up
We’re dedicated to bringing you well-designed
products that make living fun and easy. We stand
behind all our products and warrant this to be free
from defects in workmanship and materials for 30
days from the date of purchase.
For service claims or questions please consult our
website ProtocolNY.com.
Images may vary from actual product.
Desktop Racer.
1
2
3
4
5
6
7
8
Begin by gently bending pieces A1 into a curve.
Note: Make sure all pieces are pressed in all the way
in order to securely interlock and leave room for other pieces.
A1 + B2
Attach pieces A1 onto pieces B2.
+ B3
Attach pieces B3 onto one of the structures
from step 2.
+ X
Attach motor X by sliding the metal ends into the
corresponding holes in piece B2.
+ B4
Attach piece B4.
+ A2
Attach the other A2 structure to frame the motor.
Make sure the metal ends from motor X poke
through the holes.
+ B5
Bend piece B5 to join it to pieces A2.
+ B6
Add piece B6 to the front.
Use the awl to punch out all of the pieces.
Follow the instructions step by step.
x4
12
13
16
17
18
19
20
21
22
15
14
9
10
11
+ A7
Gently bend piece A7.
+ B8
Gently bend piece B8.
A7 + B8
Attach piece A7 to B8.
Attach structure from step 11 to to the structure
from step 8. Fold the ladder from piece B8 under
and attach.
+ B9
Attach piece B9. This piece attaches so it can
rotate up and down.
+A10
Gently bend and fold sides of piece A10.
+A11
Gently bend and fold sides of piece A11.
Attach piece A11 to the back of piece A10.
+A12
Attach pieces A12.
+B13
Attach piece B13.This piece attaches
so it can rotate up and down.
Prepare to attach structures from step 13
and step 18. Lay structure 18 on the back of
structure 13 so that the circles align.
+A14
Join the structure from step 19 by sliding
pieces A14 through the holes so that they
interlock.
+F
Attach wheel axle F by sliding it through
the holes in pieces A2.
+W
Attach wheels W by pressing them firmly onto
the wheel axle attached in step 21, and the
metal spokes sticking out from motor X in step 4.
Alternative: Puzzle can be displayed with truck bed
tilted up by rotating piece B9 and attaching it to the
small hole in piece A10.
Puzzle complete!
Wind motor to start racing.
/
