Page is loading ...
1.05-11282014-102800
USER MANUAL
ARTiGO A800
Ultra Compact and Slim Size System
with ARM based VAB-800 board
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Copyright
Copyright © 2013-2014 VIA Technologies Incorporated. All rights reserved.
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language,
in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written
permission of VIA Technologies, Incorporated.
Trademarks
All trademarks are the property of their respective holders.
Disclaimer
No license is granted, implied or otherwise, under any patent or patent rights of VIA Technologies. VIA Technologies makes no
warranties, implied or otherwise, in regard to this document and to the products described in this document. The information
provided in this document is believed to be accurate and reliable as of the publication date of this document. However, VIA
Technologies assumes no responsibility for the use or misuse of the information (including use or connection of extra
device/equipment/add-on card) in this document and for any patent infringements that may arise from the use of this document.
The information and product specifications within this document are subject to change at any time, without notice and without
obligation to notify any person of such change.
VIA Technologies, Inc. reserves the right the make changes to the products described in this manual at any time without prior
notice.
Regulatory Compliance
FCC
FCCFCC
FCC-
--
-A Radio Frequency Interference Statement
A Radio Frequency Interference StatementA Radio Frequency Interference Statement
A Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his
personal expense.
Notice 1
Notice 1Notice 1
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
Notice 2
Notice 2Notice 2
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.
Not
NotNot
Notice 3
ice 3ice 3
ice 3
The product described in this document is designed for general use, VIA Technologies assumes no responsibility for the conflicts
or damages arising from incompatibility of the product. Check compatibility issue with your local sales representatives before
placing an order.
Battery Recycling and Disposal
Only use the appropriate battery specified for this product.
Do not re-use, recharge, or reheat an old battery.
Do not attempt to force open the battery.
Do not discard used batteries with regular trash.
Discard used batteries according to local regulations.
Safety Precautions
Always read the safety instructions carefully.
Keep this User's Manual for future reference.
All cautions and warnings on the equipment should be noted.
Keep this equipment away from humidity.
Lay this equipment on a reliable flat surface before setting it up.
Make sure the voltage of the power source and adjust properly
110/220V before connecting the equipment to the power inlet.
Place the power cord in such a way that people cannot step on it.
Always unplug the power cord before inserting any add-on card or module.
If any of the following situations arises, get the equipment checked by authorized service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment has not worked well or you cannot get it work according to User's
Manual.
The equipment has dropped and damaged.
The equipment has obvious sign of breakage.
Do not leave this equipment in an environment unconditioned or in a storage temperature
above 75°C (167°F). The equipment may be damaged.
Never pour any liquid into the opening. Liquid can cause damage or electrical shock.
Do not place anything over the power cord.
Do not cover the ventilation holes. The openings on the enclosure protect the equipment
from overheating.
ARTiGO A800 User Manual
ARTiGO A800 User ManualARTiGO A800 User Manual
ARTiGO A800 User Manual
iv
Box Contents
1 x ARTiGO A800 system
1 x AC-to-DC adapter, DC 5V/2A, 10W
1 x COM connector cable
2 x Jumper caps
4 x VESA mounting screws (M4 x 6mm)
4 x Rubber foot
Ordering Information
Part Number
Part NumberPart Number
Part Number
Description
DescriptionDescription
Description
AT
ATAT
ATG
GG
G-
--
-A800
A800A800
A800-
--
-1S08A1
1S08A11S08A1
1S08A1 ARTiGO System with Freescale Cortex-A8 Single Core i.MX537
800 MHz, 4GB Flash, 1GB DDR3 SDRAM, 4 x USB 2.0, 1 x Mini
HDMI, 1 x VGA, 1 x LAN, 1 x DC-In jack and 1 x Micro SD slot
Optional Accessories
Model Number
Model NumberModel Number
Model Number
Description
DescriptionDescription
Description
EMIO-1533-00A1 Wireless USB IEEE802.11 b/g/n Standards Assembly Kit
ARTiGO A800 User Manual
ARTiGO A800 User ManualARTiGO A800 User Manual
ARTiGO A800 User Manual
v
Table of Contents
1.
1.1.
1.
Product Overview
Product OverviewProduct Overview
Product Overview ................................
................................................................
................................................................
................................................................
................................................................
................................................................
................................ 1
11
1
1.1.
Key Features................................................................................................... 1
1.1.1.
ARM based system ................................................................................. 1
1.1.2.
Ultra compact slim size and space saving............................................ 1
1.1.3.
Optimize integration with multiple I/O access................................ 1
1.1.4.
Storage expansion .................................................................................. 1
1.1.5.
Mounting solution................................................................................... 2
1.1.6.
Networking support ............................................................................... 2
1.1.7.
Embedded OS ready ............................................................................. 2
1.2.
Product Specifications................................................................................. 3
1.3.
Panel Layout .................................................................................................. 6
1.4.
Dimensions .................................................................................................... 7
2.
2.2.
2.
External I/O Pin Descriptions and Functionality
External I/O Pin Descriptions and FunctionalityExternal I/O Pin Descriptions and Functionality
External I/O Pin Descriptions and Functionality ................................
................................................................
...............................................
..............................
............... 9
99
9
2.1.
Power Button................................................................................................. 9
2.2.
USB 2.0 Port................................................................................................... 9
2.3.
Audio Jacks .................................................................................................. 10
2.4.
VGA Connector .......................................................................................... 11
2.5.
Mini HDMI
®
Port......................................................................................... 12
2.6.
RJ-45 LAN Port (Fast Ethernet)................................................................ 13
2.7.
DC-In Jack .................................................................................................... 14
2.8.
Micro SD Card Slot.................................................................................... 14
2.9.
COM Connector ......................................................................................... 15
3.
3.3.
3.
Hardware Installation
Hardware InstallationHardware Installation
Hardware Installation ................................
................................................................
................................................................
................................................................
........................................................
................................................
........................ 17
1717
17
3.1.
Installing Micro SD Card........................................................................... 17
3.2.
Removing Chassis Top Cover .................................................................. 19
3.3.
Installing WLAN (WiFi) kit ....................................................................... 20
3.4.
Selecting Boot Device............................................................................... 22
3.5.
Connecting COM Connector (optional)............................................... 23
3.6.
Installing Rubber Feet ............................................................................... 24
3.7.
Installing VESA mounting kit (optional) ............................................... 25
4.
4.4.
4.
Software and Technical Supports
Software and Technical SupportsSoftware and Technical Supports
Software and Technical Supports ................................
................................................................
................................................................
................................................................
....................................
........
.... 29
2929
29
4.1.
Linux Driver Support.................................................................................. 29
4.1.1.
Driver Installation.................................................................................. 29
4.2.
Technical Supports and Assistance........................................................ 29
ARTiGO A800 User Manual
ARTiGO A800 User ManualARTiGO A800 User Manual
ARTiGO A800 User Manual
vi
Appendix A. Power Consumption Report
Appendix A. Power Consumption ReportAppendix A. Power Consumption Report
Appendix A. Power Consumption Report................................
................................................................
...............................................................
..............................................................
............................... 31
3131
31
A.1. ATG-A800-1S08A1 ............................................................................................ 31
A.1.1. Idle Status..................................................................................................... 31
A.1.2. Suspend Status ............................................................................................ 31
A.1.3. Run Demo Test............................................................................................ 31
A.1.4. S5 Status ....................................................................................................... 32
ARTiGO A800 User Manual
ARTiGO A800 User ManualARTiGO A800 User Manual
ARTiGO A800 User Manual
vii
Lists of Figures
Figure 1: Front Panel layout ............................................................................................ 6
Figure 2: Rear Panel layout.............................................................................................. 6
Figure 3: Front view dimension ...................................................................................... 7
Figure 4: Side view dimension........................................................................................ 7
Figure 5: Bottom view dimension .................................................................................. 7
Figure 6: Power button diagram .................................................................................... 9
Figure 7: USB 2.0 port diagram ...................................................................................... 9
Figure 8: Audio jack receptacle stack diagram......................................................... 10
Figure 9: VGA connector diagram............................................................................... 11
Figure 10: Mini HDMI
®
port diagram .......................................................................... 12
Figure 11: RJ-45 LAN port diagram ............................................................................. 13
Figure 12: DC-In jack diagram....................................................................................... 14
Figure 13: Micro SD Card slot diagram ...................................................................... 14
Figure 14: COM connector diagram ........................................................................... 15
Figure 15: Removing Micro SD card access cover................................................... 17
Figure 16: Inserting Micro SD card .............................................................................. 18
Figure 17: Removing top cover screws ...................................................................... 19
Figure 18: Remove top cover chassis.......................................................................... 19
Figure 19: Installing WLAN module ........................................................................... 20
Figure 20: Connecting WLAN board-to-board cable............................................. 20
Figure 21: Removing WLAN antenna hole cover..................................................... 21
Figure 22: Installing WLAN antenna ........................................................................... 21
Figure 23: Boot Device select jumper ........................................................................ 22
Figure 24: Connecting COM connector cable.......................................................... 23
Figure 25: Installing rubber feet................................................................................... 24
ARTiGO A800 User Manual
ARTiGO A800 User ManualARTiGO A800 User Manual
ARTiGO A800 User Manual
viii
Lists of Tables
Table 1: USB 2.0 ports pinout ........................................................................................ 9
Table 2: Audio jack receptacle description.............................................................. 10
Table 3: VGA connector pinout .................................................................................. 11
Table 4: Mini HDMI
®
port pinout................................................................................ 12
Table 5: RJ-45 LAN port pinout................................................................................... 13
Table 6: RJ-45 LAN port color LED definition.......................................................... 13
Table 7: DC-In jack pinout ............................................................................................ 14
Table 8: COM connector pinout ................................................................................. 15
Table 9: Boot Device select jumper settings............................................................ 22
ARTiGO A800 User Manual
ARTiGO A800 User ManualARTiGO A800 User Manual
ARTiGO A800 User Manual
1
1.
1.1.
1. Product Overview
Product OverviewProduct Overview
Product Overview
The VIA ARTiGO A800 is an ultra compact, ultra slim and fanless embedded
system using VIA VAB-800 Pico ITX board powered by Freescale Cortex-A8
ARM processor, and completely compatible with Android 2.3 and Ubuntu
10.04 operating systems.
The ARTiGO A800 is optimized for both power and performance with a wide
operating temperature range from 0°C to 50°C, while offering very low power
consumption of typical 5W. It also supports multiple I/O connectors such as
USB 2.0 ports, VGA port, mini HDMI
®
port, Ethernet port and audio ports for
diversified embedded applications. In addition, the ARTiGO A800 offers
Micro SD card slot and optional WLAN connectivity using the VIA EMIO-1533
module.
1.1. Key Features
1.1.1. ARM based system
Using a single core superscalar ARM Cortex A8 processor at 800 MHz speed,
the VIA Embedded ARM based system ARTiGO A800 provides a full range of
feature-rich, extremely power-efficient, and cost-effective solutions that are
suitable for the fast-emerging, ultra-portable embedded computing
applications.
1.1.2. Ultra compact slim size and space saving
The ARTiGO A800 has an ultra slim and compact chassis, designed to save
space that makes it suitable to install in space critical environment and to
ensure maximum reliability. Its chassis design has a robust aluminum alloy top
cover and bottom steel chassis.
1.1.3. Optimize integration with multiple I/O access
Front and rear I/O access enables the ARTiGO A800 to easily support various
applications as well as for easy integration and quick setup.
1.1.4. Storage expansion
The Micro SD slot enables the ARTiGO A800 to have a flexible storage of
Micro SD card memory.
ARTiGO A800 User Manual
ARTiGO A800 User ManualARTiGO A800 User Manual
ARTiGO A800 User Manual
2
1.1.5. Mounting solution
ARTiGO A800 supports multiple methods for mounting; it can be mounted to
VESA mountable surfaces or even to wall with the VESA mounting kit.
1.1.6. Networking support
The ARTiGO A800 is equipped with RJ-45 port that supports high speed
100Mbit Ethernet. It also has wireless networking option that give the system
a freedom of WiFi access through EMIO-1533 WLAN USB module.
1.1.7. Embedded OS ready
The ARTiGO A800 is compatible with Android 2.3 and Ubuntu 10.04
operating systems.
ARTiGO A800 User Manual
ARTiGO A800 User ManualARTiGO A800 User Manual
ARTiGO A800 User Manual
3
1.2. Product Specifications
Processor
ProcessorProcessor
Processor
Freescale Cortex-A8 Single-Core i.MX537 @ 800 MHz
System Memory
System MemorySystem Memory
System Memory
1GB DDR3-800 SDRAM using 128M x16 memory devices
Flash
FlashFlash
Flash
eMMC Flash default 4GB
Graphics
GraphicsGraphics
Graphics
Controller
ControllerController
Controller
Support two independent, integrated graphics processing units:
OpenGL® ES 2.0 3D graphics accelerator
OpenVG™ 1.1 2D graphics accelerator
CRT Interface
CRT InterfaceCRT Interface
CRT Interface
Onboard 1 x VGA connector
HDMI
HDMIHDMI
HDMI
®
Interface
Interface Interface
Interface
Silicon Image SiI9024A HDMI Transmitter
Onboard 1 x mini HDMI connector
Ethernet
EthernetEthernet
Ethernet
Controller
ControllerController
Controller
SMSC LAN8720A 10/100 PHY Transceiver with HP Auto-MDIX support
Interface
InterfaceInterface
Interface
Support One RJ45 connector
High Definition Audio
High Definition AudioHigh Definition Audio
High Definition Audio
Controller
ControllerController
Controller
Freescale SGTL5000 Low Power Stereo Codec with Headphone
Interface
InterfaceInterface
Interface
Support Line-In, Line-Out, Mic-In connectors via cable
Serial
SerialSerial
Serial
USB
USBUSB
USB
SMSC USB 2.0 High Speed 4-Port Hub Controller
4 x USB ports, USB 2.0 compliant
2 x USB ports connector onboard
1 x USB ports connector
1 x USB 2.0 pin header onboard support optional VIA 802.11n WiFi
module EMIO-1533.
Notes
NotesNotes
Notes:
::
:
1. The maximum power for both USB ports is 2.5W.
2. Reserve at least one USB port for keyboard or mouse usage.
ARTiGO A800 User Manual
ARTiGO A800 User ManualARTiGO A800 User Manual
ARTiGO A800 User Manual
4
Storage
Storage Storage
Storage Interface
InterfaceInterface
Interface
Interface
InterfaceInterface
Interface
eMMC Flash default 4GB
1 x Onboard Micro SD slot
System Indicator
System IndicatorSystem Indicator
System Indicator
Power Status LED
Power Status LEDPower Status LED
Power Status LED
1 x Power button with blue color LED
Watchdog Timer
Watchdog TimerWatchdog Timer
Watchdog Timer
Output
OutputOutput
Output
Integrated watch dog timer supports two comparison points. Each
comparison point can interrupt ARM core, 2nd comparison point capable of
generating external interrupts on WDOG line
I/O
I/O I/O
I/O P
PP
Ports and
orts and orts and
orts and C
CC
Connectors
onnectorsonnectors
onnectors
Front
Front Front
Front P
PP
Panel
anel anel
anel
1 x Power On/Off button with Power LED
2 x USB 2.0 ports
3 x 3.5
ø
Audio jack as Line-Out, Line-In and Mic-In
Rear
Rear Rear
Rear P
PP
Panel
anelanel
anel
1 x VGA connector
1 x Mini HDMI
®
port
2 x USB 2.0 ports
1 x RJ-45 port (10/100Mbps Ethernet)
1 x DC-In jack
1 x Antenna hole reserved for Wireless LAN (WiFi)
Bottom
Bottom Bottom
Bottom S
SS
Side
ideide
ide
(open window with removable cover)
1 x Micro SD slot
1 x COM connector (for debugging only)
Onboard J
Onboard JOnboard J
Onboard Jumper
umperumper
umper
1 x Boot Device select jumper (select Micro SD / eMMC / USB-OTG)
Power Supply
Power SupplyPower Supply
Power Supply
Input Voltage
Input VoltageInput Voltage
Input Voltage
DC 5V
Power Input Connector
Power Input ConnectorPower Input Connector
Power Input Connector
1 x DC Power Input with DC Jack
Power Consumption
Power ConsumptionPower Consumption
Power Consumption
Typical: 5W
Mechanical
MechanicalMechanical
Mechanical
Construction
ConstructionConstruction
Construction
Aluminum top Cover
Metal chassis housing
Support 75 mm x 75 mm VESA mount hole
Inside WiFi Mo
Inside WiFi MoInside WiFi Mo
Inside WiFi Mounting
untingunting
unting
Mounting hole on P910-C daughter board for EMIO-1533 module
ARTiGO A800 User Manual
ARTiGO A800 User ManualARTiGO A800 User Manual
ARTiGO A800 User Manual
5
System Dimension
System DimensionSystem Dimension
System Dimension (L x W x H)
(L x W x H) (L x W x H)
(L x W x H)
125 mm x 120 mm x 30 mm
Weight
WeightWeight
Weight
0.5 Kg (net weight)
Environmental Specif
Environmental SpecifEnvironmental Specif
Environmental Specification
icationication
ication
Operating Temperature
Operating TemperatureOperating Temperature
Operating Temperature
0°C up to 50°C (with onboard eMMC)
0°C up to 45°C (with Micro SD)
Storage
StorageStorage
Storage Temperature
Temperature Temperature
Temperature
-40°C to 85°C @ 90%, non-condensing
Relative
RelativeRelative
Relative Humidity
Humidity Humidity
Humidity
0% ~ 90% @ 45°C, non-condensing
EMC Approved
EMC ApprovedEMC Approved
EMC Approved
CE, FCC, CCC(TBD) Class A
Software Compa
Software CompaSoftware Compa
Software Compatibility (Operating System)
tibility (Operating System)tibility (Operating System)
tibility (Operating System)
Android 2.3
Ubuntu 10.04
RoH
RoHRoH
RoHS
SS
S
RoHS supported
Note
NoteNote
Notes
ss
s:
: :
:
1. As the operating temperature provided in the specifications is a result of the test performed in VIA’s
chamber, a number of variables can influence this result. Please note that the working temperature
may vary depending on the actual situation and environment. It is highly suggested to execute a
solid testing and take all the variables into consideration when building the system. Please ensure
that the system runs well under the operating temperature in terms of application.
2. Please note that the lifespan of the onboard eMMC memory chip may vary depending on the
amount of access. More frequent and larger data access on eMMC memory makes its lifespan
shorter. Therefore, it is highly recommended to use a replaceable external storage (e.g., Micro SD
card) for large data access.
ARTiGO A800 User Manual
ARTiGO A800 User ManualARTiGO A800 User Manual
ARTiGO A800 User Manual
6
1.3. Panel Layout
Figure
Figure Figure
Figure 1
11
1: Front Panel layout
: Front Panel layout: Front Panel layout
: Front Panel layout
Figure
Figure Figure
Figure 2
22
2: Rear Panel layout
: Rear Panel layout: Rear Panel layout
: Rear Panel layout
ARTiGO A800 User Manual
ARTiGO A800 User ManualARTiGO A800 User Manual
ARTiGO A800 User Manual
7
1.4. Dimensions
Figure
Figure Figure
Figure 3
33
3:
: :
: F
FF
Front view d
ront view dront view d
ront view dimension
imensionimension
imension
Figure
Figure Figure
Figure 4
44
4:
: :
: S
SS
Side view dimension
ide view dimensionide view dimension
ide view dimension
Figure
Figure Figure
Figure 5
55
5:
: :
: B
BB
Bottom view dimension
ottom view dimensionottom view dimension
ottom view dimension
ARTiGO A800 User Manual
ARTiGO A800 User ManualARTiGO A800 User Manual
ARTiGO A800 User Manual
9
2.
2.2.
2. External
External External
External I/O
I/O I/O
I/O Pin
Pin Pin
Pin Description
DescriptionDescription
Descriptions
ss
s
and Functionality
and Functionalityand Functionality
and Functionality
The ARTiGO A800 has external I/O ports located on the front and rear panel
side of the chassis.
2.1. Power Button
The ARTiGO A800 comes with a power button with built-in power LED
indicator. The power button supports Soft Power-On/Off (Instant Off or 4
second delay) and Suspend.
Figure
Figure Figure
Figure 6
66
6: Power
: Power : Power
: Power button
buttonbutton
button diagram
diagram diagram
diagram
2.2. USB 2.0 Port
The ARTiGO A800 has four USB ports. There are two USB ports at the front
panel and two additional ports at the rear panel. Each USB port gives
complete Plug and Play and hot swap capability for external devices. The USB
interface complies with USB UHCI, Rev. 2.0. The pinout of the USB 2.0 port is
shown below.
Figure
Figure Figure
Figure 7
77
7:
: :
: USB 2.0 port
USB 2.0 portUSB 2.0 port
USB 2.0 port diagram
diagram diagram
diagram
USB1
USB1USB1
USB1
USB2
USB2USB2
USB2
USB3
USB3USB3
USB3
USB4
USB4USB4
USB4
Pin
PinPin
Pin
Signal
SignalSignal
Signal
Pin
PinPin
Pin
Signal
SignalSignal
Signal
Pin
PinPin
Pin
Signal
SignalSignal
Signal
Pin
PinPin
Pin
Sign
SignSign
Signal
alal
al
1 VCC 1 VCC 1 VCC 1 VCC
2 USB1 data- 2 USB2 data- 2 USB3 data- 2 USB4 data-
3 USB1 data+ 3 USB2 data+ 3 USB3 data+ 3 USB4 data+
4 GND 4 GND 4 GND 4 GND
Table
Table Table
Table 1
11
1:
: :
: USB 2.0 port
USB 2.0 portUSB 2.0 port
USB 2.0 ports
ss
s
pinout
pinoutpinout
pinout
ARTiGO A800 User Manual
ARTiGO A800 User ManualARTiGO A800 User Manual
ARTiGO A800 User Manual
10
2.3. Audio Jacks
The ARTiGO A800 offers High Definition Audio through 3.5 mm TRS jack
connectors at the front panel: Line-Out, Line-In and Mic-In.
The Line-Out jack is for connecting external speakers or headphones. The Line-
In jack is for connecting and external audio devices such as CD player, tape
player, and etc. The Mic-In jack is for connecting to a microphone.
Figure
Figure Figure
Figure 8
88
8:
: :
: Audio jack receptacle stack
Audio jack receptacle stackAudio jack receptacle stack
Audio jack receptacle stack diagram
diagram diagram
diagram
Jack
JackJack
Jack
Description
DescriptionDescription
Description
Line-Out TRS jack, 3.5mm Ø 5P, 90 Degree, Female, shielded
Line-In TRS jack, 3.5mm Ø 5P, 90 Degree, Female, shielded
Mic-In TRS jack, 3.5mm Ø 5P, 90 Degree, Female, shielded
Table
Table Table
Table 2
22
2: Audio jack receptacle
: Audio jack receptacle : Audio jack receptacle
: Audio jack receptacle description
descriptiondescription
description
ARTiGO A800 User Manual
ARTiGO A800 User ManualARTiGO A800 User Manual
ARTiGO A800 User Manual
11
2.4. VGA Connector
The ARTiGO A800 provides a high resolution VGA interface through DE-15
female connector on the rear panel to support analog VGA monitors. The
VGA interface supports up to 1680 x 1050 @ 60Hz resolution. The pinout of
the VGA connector is shown below.
Figure
Figure Figure
Figure 9
99
9: VGA
: VGA : VGA
: VGA connector
connectorconnector
connector diagram
diagram diagram
diagram
Pin
PinPin
Pin
Signal
SignalSignal
Signal
1 VGA-R
2 VGA-G
3 VGA-B
4 NC
5 GND
6 GND
7 GND
8 GND
9 +5VCRT
10 GND
11 NC
12 VGA-SPD
13 VGA_HS
14 VGA_VS
15 VGA-SPCLK
Table
Table Table
Table 3
33
3: VGA connector pinout
: VGA connector pinout: VGA connector pinout
: VGA connector pinout
/
