Noble House 298196 Operating instructions

Type
Operating instructions

This manual is also suitable for

Label Picture Description QTY
A Table Top 1
B Table Leg 4
C Central Support Ring 1
Assembly Instructions
Caution : You must read this before you proceed
RECTANGULAR TABLE
CAUTION : This table is NOT a TOY.
Keep your child / children at bay during the assembly process.
Parts list
Picture
Page 1 OF 5
Label Picture Description QTY
Washers(8mm) 8
Spring
Washers(8mm)
8
Hex Bolt (30mm) 8
Washers(8mm) 8
Spring
Washers(8mm)
8
Hex Bolt (25mm) 8
Spanner 1
Hardware
Assembly Preparation
Before Beginning
Assembly:
Page 2 OF 5
Step 1
Step 2
Assembly Steps
Overview
This Table has multiple parts and may require up to some 30 minutes to
assemble. To give you an overview of the Table parts, the above picture
is to help you put the various parts into perspective. Please read through
the instructions herebelow to familiarise the parts and steps before
assembly.
Unpack and place all parts on a clean soft surface.
Loosely attach the Central Support Ring(C) to Table Legs(B) using washers,
Spring Washers, and Hex Bolts(①), with the Spanner(③).
At this stage, only loosely tighten the Bolts.
Table Top (A)
Table Leg (B)
Central Support
Ring(C)
Page 3 OF 5
Step 3
Step 4
Step 5
Repeat step 2, attaching the remaining 3 legs to the Central Round Support
Ring(C)
At this stage, only loosely tighten the Bolts.
Lay the Table Top(A), top facedown onto a flat, soft, clean surface.
Attach the Table Legs(B) to the the Table Top(A) using Washers, Spring Washers,
and Nuts() with the Spanner().
At this stage, only loosely tighten the Bolts.
Stand the table rightside up.
In a sequential manner, proceed to tighten up all bolts.
Your table is now ready for use.
I
Table Top (A)
Table Legs(B)
Page 4 OF 5
Page 5 OF 5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Noble House 298196 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI