1 OF 4
Assembly Instructions
Caution : You must read this before you proceed.
SQUARE MESH TABLE
CAUTION : This table is NOT a TOY.
Keep your child / children at bay during the assembly process.
Assembly Preparation
Before Beginning Assembly:
2 OF 4
NO. Picture QTY
A 1
B 4
C 1
8
8
8
8
8
8
J 1
H
Loosely attach the Central Round Support Ring(C) to Table Legs(B) using
washers, Spring Washers, and Hex Bolts(H), with the Spanner(J).
DO NOT OVERTIGHTEN.
Parts list
Unpack and place all parts on a clean soft surface.
Hard ware
Washers(8mm)
Spring Washers(8mm)
Hex Bolt (30mm)
Spanner
Description
Table top
Table leg
Central Round Support Ring
I
Washers(8mm)
Spring Washers(8mm)
Hex Bolt (25mm)
Assembly Step
H
J
3 OF 4
Stand the table rightside up.
In a sequential manner, proceed to tighten up all screws.
Your table is now ready for use.
Lay the Table Top(A), top facedown, onto a flat, soft, clean surface.
Attach the Table Legs(B) to the the Table Top(A) using Washers, Spring
Washers, and Nuts(I) with the Spanner(J).
DO NOT OVERTIGHTEN.
Repeat step 2, attaching the remaining 3 legs to the Central Round Support
Ring(C)
DO NOT OVER TIGHTEN.
H
I
4 OF 4
/
