Handles, hinges
Fläkt Woods 4071 GB 03.01 2 Specifications are subject to alteration without notice
EU Air Handling Unit INSTALLATION
Sizes 60–84
Fig. 5
Fig. 6
To adjust the hinges
Release items (1) and (2), and use a 5 mm allen wrench
to adjust the gaps ”A” so that they will be equally wide.
Gap ”B” should be max. 3 mm. Use spacers of suitable
thicknesses. Tighten the screws for item (2) being careful
not to overtighten them, as this will damage the threads
in the frame member. Push parts (1) and (2) together and
tighten the screws for item 1. Check that the sealing
strips around the door seal properly and that the door is
easy to open and close and check the operation of the
lock. Sizes 71, 73, 80–84 EUQA, EUPC (f = 1)
Sizes 71, 73, 80–84
2200 (sizes 71, 73)
2500 (sizes 80–84)
12