EUPZ-07, -12, -13 Pressure measuring equipment
Fläkt Woods 4053 GB 03.01 1 Specifications are subject to alteration without notice
EU Air Handling Unit INSTALLATION
To ensure correct measurements, it is important that the
manometer be mounted horizontally.
Pressure measuring equipment
Measurement range of the manometer: up to 400 Pa.
Temperature range –25° →+100°C.
Use screws to secure the manometer (manometers) to the
adjacent panel or to a separately mounted plate, and
connect the hoses supplied as shown in Fig. 1 to the
measurement tappings on the framework.
Version for sizes 11–53.
Fig. 1. Manometer (manometers) EUPZ-07 mounted on the EUPA short filter or
the EUPB and EUPC long filter.
Note. Two manometers for installations with pre-filter (EUPC).
To ensure correct measuremetns, it is important that the
manometer be mounted horizontally.
EUPZ-13 Wiring diagram
Fig. 2
1. EU-frame member
2. Inspection door
Fig. 3. EUPZ-12 Manometer
Temperature range –20° →+ 50°C
Fig. 4. EUPZ-13 Manometer
Temperature range –15° →+ 50°C
Fig. 5
Alternative manometers
Connect EUPZ-12, -13, manometer with a tube in the
same manner as EUPZ-07.
Version for sizes 60–84
1
2