Videology D4T7L3.6IR Series User manual

Brand: Videology

Model: D4T7L3.6IR Series

Category: Security cameras

Type: User manual

Videology D4T7L3.6IR Series

This 4” Aluminum Day & Night IR Dome Camera is a versatile and powerful surveillance solution. With its 1/3” SONY Super HAD CCD Sensor, it delivers high-definition images with a resolution of 420 TVL. This camera is equipped with built-in auto gain control (AGC) and auto electronic shutter function, ensuring clear and stable images even in low-light conditions.

The D4T7L3.6IR Series camera features 0 Lux illumination with IR LED on, providing exceptional night vision capabilities.

Videology D4T7L3.6IR Series

The D4T7L3.6IR Series camera features 0 Lux illumination with IR LED on, providing exceptional night vision capabilities.

04/11/10 INS-D4T7L3.6IR Rev A

Information may change without notice.

This document provides technical information for the user.

Videology reserves the right to modify the information in

this document as necessary. The customer should make

sure that they have the most recent manual version.

Videology holds no responsibility for any errors that may

appear in this document.

Warning

Before providing power to the camera, please

read this User Guide in detail.

Do not attempt to disassemble the camera.

If the camera does not work, please contact a

local distributor or Videology.

Warning

Explanation of Graphical Symbols

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

The lightning flash with

arrowhead symbol, within an

equilateral triangle, is intended to

alert the user to the presence of

non-insulated dangerous voltage

within the product's enclosure

that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

Introduction

Congratulations on your purchase of this IR

dome camera. We use the latest illumination &

sensor technology.

Some of the most attractive characteristics

include: vandal-proof, widely applicable to day

& night viewing and weather resistant.

In addition, it offers high definition and

stability along with rich and real color.

Ease of use and repair are convenient as well.

Camera Features

 1/3” SONY Super HAD CCD Sensor

 Built-in auto gain control (AGC) circuit. The

color camera can get high definition picture

in low Lux condition

 Built-in auto electronic shutter function. The

color camera’s AES speed can reach

1/100,000s

 Camera gama characteristic is 0.45

 NTSC/PAL selectable

 0 Lux with IR LED on. High quality IR LEDs,

generating good night-vision effect

Connecting

Videology Imaging

Solutions, Inc. USA

Videology Imaging

Solutions, B.V. Europe

37M Lark Industrial

Parkway

Greenville, RI 02828

Tel: 401-949-5332

Fax: 401-949-5276

www.videologyinc.com

Neutronenlaan 4

NL-5405 NH Uden,

Netherlands

Tel: +31 (0) 413-256261

Fax: +31 (0) 413-251712

www.videology.nl

Instruction Manual

4” Aluminum Day & Night

IR Dome Camera

D4T7L3.6IR Series

IMAGING SOLUTIONS INC.

Ori

inal E

ment Manufacture

04/11/10 INS-D4T7L3.6IR Rev A

Troubleshooting

1. No Picture after supplying power.

 Please check the power supply voltage

and a proper ground.

 Please check all the connecting cables

and monitors.

2. The picture level direction has flowing

interference ripples.

 May be caused by the power supply AC

ripples, it needs to filter the wave of the

power supply.

 Check the monitor and peripheral

equipments used.

3. The picture background color changes

continuously.

 The fluorescent lamp’s electromagnetic

field can cause color roll. This is a proper

phenomenon of the cameras.

 Reduce the number of fluorescent lamps

or increase the distance between the

camera and the fluorescent lamps.

 Use the power supply's external sync.

4. The picture smears.

 The power supply’s voltage is unstable.

 Incorrectly connected cables or high

impedance.

Specifications

D4T7L3.6IR

Electrical

NTSC

PAL

Image Sensor 1/3” CCD

Total Pixels (H x V) 512 x 492 500 x 582

Sensing Area 4.9mm x 3.7mm

Resolution 420 TVL

Sensitivity 0.8 lux, 0 lux with IR

Signal To Noise Ratio >48dB

Gamma 0.45

Gain Control On / off

Synchronization Internal

Backlight Comp On/ off switchable

White Balance Auto

Electronic Shutter Speed

1/60 – 1/100,000 sec

1/50 – 1/100,000 sec

Iris Control Video / DC iris

Video Output 1Vp-p composite video @ 75 ohms

Audio Optional

Infrared Lamp Control

Day / night, off / on, automatic

Infrared Wavelength 850nm

Infrared Lamp Distance >10m

Power Supply 12VDC

Power Consumption 200mA

Environmental

Operating Temp -15

C ~ 45

C (-5

F ~ 113

Operating Humidity RH 85% max

Storage Temp -10

C ~ 45

C (14

F ~ 113

Storage Humidity RH 85% max

Mechanical

Dimensions Ø 94mm x 68.5mm (Ø 3.7” x 2.69”)

Lens M12 mount, F3.6mm standard

Various optional M-12 mount lenses are available with

minimum lot sizes

Cable (Included) 1 BNC & 1 power jack

Complementary Models

D4T9L3.6IR 480 TVL (Min 100pc lot size is required)

* D4T7L3.6IR-A 420 TVL with audio option

* D4T9L3.6IR-A 480 TVL with audio option

(Min 100pc lot size is required)

* Audio option: Equipment with audio recording capabilities are

intended to be used only for legal and proper purposes. The

customer assumes all liability related to legal and proper use

per VIS waiver FOR-03-021.

Videology D4T7L3.6IR Series User manual

Brand: Videology

Model: D4T7L3.6IR Series

Category: Security cameras

Type: User manual

Videology D4T7L3.6IR Series

The D4T7L3.6IR Series camera features 0 Lux illumination with IR LED on, providing exceptional night vision capabilities.

Download PDF

report

Videology D4T7L3.6IR Series User manual

Videology D4T7L3.6IR Series User manual

Related papers

Other documents