Facina VKFCB1 Engineer Manual

Category
Security camera accessories
Type
Engineer Manual
INTRODUCTION
Congratulations on your purchase of this FACINA
product. This VKFCB1 is a high quality day / night camera
with LED illumination, wide angle lens, & a sturdy cable
managed mounting bracket.
The camera can be used indoors or outdoors & has a
removable sun shield.
Please read this instruction manual carefully before
installation to ensure correct use of the product.
CONNECTIONS
PRODUCT FEATURES
Sensor CCD
COLOUR 1/4 CCD sensor.
Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The colour cam-
era can achieve high quality images in low Lux conditions
Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The colour
camera’s AES speed can reach 1/100,000s.
Gamma Characteristic
Camera Gamma characteristic is 0.45.
Scanning Mode
NTSC or PAL mode.
Night-time Vision
0 Lux with IR LED ON. High quality IR LED’s provide
night-vision effect.
DC12V Power Supply
Monitor
TROUBLE SHOOTING
Cable Cores
Power
Video
Note
Please note the camera’s operating temperature and its using
environment requirement. Avoid using the camera at too high or
too low temperatures. The operating temperature is -10 -50 .
(Recommendatory operating temperature is -5 --40 .)
Never position the camera to face the sun or bright object. This
may damage the CCD
Do not mount the camera by a radiator or heater.
1. No Picture after providing power
. May be the power supply. please check the power supply voltage and polar-
ity.
. Please check all the connecting cables to monitoring equipment, especially
the ‘BNC’ connectors
2. The picture shows ’rolling’ interference ripples
. May be caused by induced AC voltage on to video cables. Check for AC
cables near video cables & move as necessary.
. Check the earth potentials at monitor and peripheral equipments positions.
Earth potentials should be the same at each position.
3. The picture background colour changes continuously
. The fluorescent lamp’s electromagnetic field causes colour roll. This is a
normal phenomenon of the camera.
. Reduce the fluorescent lamp numbers or increase the distance between the
camera and the fluorescent lamps.
4. The picture ‘smear’s’
. The power supply’s voltage unstable
. Cables not connected correctly or have high impedance.
To prevent fire or shock hazarded. Do not immerse the unit
The symbol is intended to alert the user to the presence of
The symbol is intended to alert the user to the presence of
into water.
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
uninsulated ‘dangerous voltagewithin the product’s
enclosure that may be of sufficient Magnitude to constitute
a risk of electric shock to persons.
Notes
Please ensure the correct specification power supply is used. Check
voltage, polarity and operating temperature match the camera’s re-
quirement
Lightning protection is recommended for use with camera equipment. If
not installed, in electrical storms, camera equipment should be
disconnected.
Video
12V DC
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK
DO NOT REMOVE COVER OR BANCK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
RISK OF ELECTRIC. DO NOT OPEN
CAUTION:
To prevent electric shocks and risk of fire hazards,
do NOT use other than specified power source.
VKFCB1
VKFCB1
Weatherproof Day & Night IR Colour
Camera
Specification
Model
VKFCB1
Pick Up Element
COLOUR 1/4 CCD
Effective Picture
Elements ( H*V )
500×582
Horizontal Resolution
420 TV Lines
S/N Ratio
Clock Frequency (MHZ)
28.375
Scanning System
2:1 interlace
Minimum Illumination
0 Lux (with IR LED ON)
Synchronous System
Internal, Negative sync.
Auto Electronic Shutter
1/50s~1/100,000s
Gamma Characteristic
0.45
Video Output
1Vpp,75 Ω
Auto Gain Control
Auto
Power Current 12VDC(+/-10%)/ 300mA
Lens
3.6 mm
Dimension (mm)
50×85×60
Weight (g)
220
Storage Temperature
-30~ +60
Operating Temperature
-10~ +45
More than 48dB
IR Project Distance
Up to 15 Meters ( with 23 Unit Infrared LED)
IR Status
Under 10 Lux by CDS
IR Power On
CDS Auto Control
Packing List
No Name Model Number
2. User Guide 1
1. Weather proof Day & Night IR Colour
Camera
VKFCB1
1
Distributed by
Audio Visual Security
4 Arkwright Court
Fylde Industrial Estate
Blackpool
FY4 5DR
Tel: 01253 830904
Fax: 01253 830905
Email: enquiries.avs@adivision.co.uk
Web: www.audiovisualsecurity.org.uk
Notes Please read this User Guide in
detail prior to installation
Do not attempt to disassemble the camera.
If the camera does not function correctly,
please contact our technical helpline on Tel:
01253 792898
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Facina VKFCB1 Engineer Manual

Category
Security camera accessories
Type
Engineer Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI