Videology 20FN744 User manual

Brand
Videology
Model
20FN744
Type
User manual
Instruction Manual
Blast Proof, Forensic Camera
2
0
FN744
Prior to Using This Document: Videology reserves the right to modify the information in
this document as necessary and without notice. It is the user’s responsibility to be certain
they possess the most recent version of this document by going to
www.videologyinc.com,
searching for the model number, and comparing revision letters on the respective
document, located in the document’s footer.
For technical assistance with this product, please contact the supplier from whom the
product was purchased.
Videology Imaging Solutions, Inc. USA Videology Imaging Solutions, B.V. Europe
37M Lark Industrial Parkway
Greenville, RI 02828
Tel: 401-949-5332
Fax: 401-949-5276
Neutronenlaan 4
NL-5405 NH Uden, Netherlands
Tel: +31 (0) 413-256261
Fax: +31 (0) 413-251712
Doc # INS-20NF744 Issue Date: 04/16/2009
Revision: A Page 1 of 6
Table Of Contents
1. Document History.............................................................................................. 3
2. General Description ........................................................................................... 3
3. Technical Specifications...................................................................................... 4
4. Video Recording................................................................................................ 5
5. Camera Programming ........................................................................................ 5
5.1. Mechanical................................................................................................. 5
6. Contact Information........................................................................................... 6
Doc # INS-20NF744 Issue Date: 04/16/2009
Revision: A Page 2 of 6
1. Document History
Revision Issue Date Reason CN#
Rev A 04-16-09 Initial release 08-0214
2. General Description
The Videology Forensic Camera is a stand alone self contained video camera and recorder,
designed primarily for Forensic applications in which the stored video images are to be
viewed after an event.
The camera design can accommodate a variety of front end imaging devices, including CCD,
CMOS, Color or monochrome sensors. Wide dynamic range and true day night versions are
also available.
The camera records video onto and internal SD card, either continuously, according to a
pre-programmed schedule, or as a result of motion within the field of view.
Both the image resolution and the frame rate can be adjusted via software to give a wide
range of recording time.
The camera is powered from an external 12V DC power supply, (a battery back up will also
be available in the future).
A hardened version of the camera is also available, in which the internal memory device is
housed within a fire and blast resistant enclosure.
The camera is designed as a compact, self contained, low cost, easily installed video
surveillance device.
Applications include monitoring of mass transit vehicles, shopping malls, large public events
etc.
Doc # INS-20NF744 Issue Date: 04/16/2009
Revision: A Page 3 of 6
3. Technical Specifications
The following specifications are for a model using the 20B44 CMOS camera front end, other
front end camera models are available.
20NF744
Electrical
NTSC PAL
Image Sensor 1/4" CMOS
640 x 480 @ 30 fps 640 x 480 @ 25 fps Active Pixels
5.6
µ
m x 5.6
µ
m
Video Compression MPEG 4 & M-JPEG
Sensitivity 1 lux (50 IRE) F1.4 3200K, w/o OLP filter
0.2 lux (30 IRE) F1.4 3200K, w/o OLP filter lens transmission
80%, scene reflection 75%
Signal To Noise Ratio 46dB (AGC On)
Gamma 0.45 default
Gain Automatic 36 dB (default)
Synchronization Internal
Back Light Compensation Default Off
White Balance AWB (default)/fixed (selectable via software)
Shutter Mode Electronic Rolling Shutter
Shutter Speed Auto exposure or fixed
Frame Rate 30 fps 25 fps
Scan Mode Interlaced
Contour Enhancement Default on, (selectable via software) (0 to max)
Mirror Mode Yes (selectable via software)
Dynamic Range 73.4 dB
Iris Controls Electronic (DC signal)
Video Output CVBS (75 Ohms)
Power Input 12VDC (+/- 20%)
Power Consumption <400 mA
Environmental
Operating Temperature -40° C ~ 85° C (-40° F ~ 185° F)
(functional to 105° C /221° F)
Storage Temperature -40° C ~ 90° C (-40° F ~ 194° F)
Operating Humidity 20% - 93% RH
Storage Humidity 20% - 93% RH
Mechanical
Dimensions W x H x D 50.4mm x 50.4mm x 92.2mm (1.98” x 1.98” x 3.63”)
Weight 321g (11 oz)
Doc # INS-20NF744 Issue Date: 04/16/2009
Revision: A Page 4 of 6
4. Video Recording
The camera stores compressed video either in full motion (MPEG4) or single frames (MJPEG)
onto an internal SD card.
Currently the size of the SD card is limited to 8 Gbyte, although larger capacity cards will be
supported in the future,
In the single frame capture mode, the camera can stored images at a maximum rate of one
frame per second.
With an 8 Gbyte card, this will provide for a maximum recording time of about 40 Hrs.
Increased recording times can be achieved by either reducing the resolution, or reducing
the frame rate.
The camera can be programmed to stop recording once the SD card is full, or to continue
recording by overwriting the oldest files first. In this way a continuous video loop is
maintained.
5. Camera Programming
The camera is equipped with an Ethernet port which can be connected directly to a PC for
the purpose of programming.
5.1. Mechanical
The dimensions of the camera (with hardened memory module) are shown below. Without
the hardened memory, the length is reduced to 75 mm.
All dimensions in mm
Doc # INS-20NF744 Issue Date: 04/16/2009
Figure 1. Physical Dimensions
Revision: A Page 5 of 6
6. Contact Information
For technical assistance with this product, please contact the supplier from whom
the product was purchased.
For OEM inquiries, contact Videology Imaging Solutions:
North / South America:
Europe:
Videology Imaging Solutions Inc.
37M Lark Industrial Parkway
Greenville, RI 02828
USA
Tel: (401) 949-5332
Fax: (401) 949-5276
Videology Imaging Solutions Europe
Neutronenlaan 4
NL-5405 NH Uden,
Netherlands
Tel: +31 (0) 413 256 261
Fax: +31 (0) 413 251 712
Please visit our WEB-site at: http://www.videologyinc.com/
VIDEOLOGY IMAGING SOLUTIONS is an ISO 9001 registered video camera developer
and manufacturer serving industrial, machine vision, biometric, security, and specialty OEM
markets. Videology designs, develops, manufactures, and distributes video, image
acquisition, and display technologies and products to OEMs worldwide.
Doc # INS-20NF744 Issue Date: 04/16/2009
Revision: A Page 6 of 6
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Videology 20FN744 User manual

Brand
Videology
Model
20FN744
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents