HUANUO HNSSK4 User manual

Brand: HUANUO

Model: HNSSK4

Category: Flat panel desk mounts

Type: User manual

HUANUO HNSSK4 is a versatile single arm monitor desk mount that provides a range of motion and adjustability for your monitor. It features both C-clamp and grommet mounting options, making it suitable for various desk types. With a weight capacity of 17.6 lbs (8 kg), it can support most standard monitors. The gas spring technology allows for smooth and effortless height adjustment, while the tension can be adjusted to suit the weight of your monitor. The mount also offers tilt, swivel, and rotation adjustments, enabling you to find the optimal viewing angle.

V8.0

Single Arm Monitor Desk Mount

Instruction Manual

Thank you for choosing this HUANUO product! At HUANUO we strive to

provide you with the best quality products and services in the industry.

Please share your experience of our product with others at

www.huanuoav.com/reviews if you are satisﬁed. Should you have any

issues, please don't hesitate to contact us.

Technical Support:

1-800-556-0533 Mon-Fri 10am - 5pm (PST) (USA) (CAN)

Other Info:

[email protected] (US/CA）

Website:

www.huanuoav.com

Model: HNSSK4

Minimum VESA Pattern: 3 in./75mm(W) x 3 in./75mm(H)

If your Monitor VESA is greater than 100 x 100 mm/4 x 4 in. or less than

VESA 75 x 75 mm/ 3 x 3 in., this mount is NOT compatible.

If this mount is NOT compatible, please contact customer service at

[email protected] to ﬁnd a compatible mount.

Please carefully read all instructions before attempting installation. If you do not

understand the instructions or have any concerns or questions, please contact

our Technical Support line at 1-800-556-0533 or customer service at

[email protected].

• Do not use this product for any purpose that is not explicitly speciﬁed in this

manual. Do not exceed weight capacity. We are not liable for damage or injury

caused by improper mounting, incorrect assembly or inappropriate use.

• This product contains a high pressure gas spring, ﬁre and percussion

prohibited. Also it is strictly prohibited to dismantle without professionals.

Please return to the manufacturer or hand over to professional agencies if the

product is abandoned.

• The desk must be capable of supporting three times the weight of the total

load (the mount, the monitor and all accessories weight). Don't use the product

on particle board.

• Before starting assembly, verify all parts are included and undamaged. Do not

use damaged or defective parts. lf you require replacement parts, contact our

Technical Support line at 1-800-556-0533 or customer service at

[email protected].

Please note: Not all parts and hardware included in this package will be used.

IMPORTANT SAFETY INFORMATION

Check the VESA Pattern of Monitor Before the Installation

MAX: 100mm/4 in.

75 mm ≈ 3 in.

100 mm ≈ 4 in.

- 01 -

Product Features

C-Clamp Mounting

Grommet Mounting

- 02 -

Do not adjust tension without monitor.

1. Ensure monitor has been attached to the mount.

2. Read your monitor box or manual to ﬁnd out monitor net weight.

3. Ensure the net weight of monitor (including accessories) is within

17.6 Ibs (8 kg).

Clockwise to reduce

tension (carry less weight) Counter-clockwise to increase

tension(carry more weight)

TENSION ADJUSTMENT SHOULD BE DONE ONLY

AFTER MOUNT INSTALLATION

Warning

Warning!

Adjustment Sign

- 03 -

1A-1

Supplied Parts and Hardware for Step 1

Supplied Parts and Hardware for Step 2

Arm

Ax1

Bolt

Hx1

Bolt

Jx1

Connecting

Plate

Bx1

Butterﬂy

Nut

Gx1

Grommet

Plate

Ix1

5/32in.(4mm)

Allen Key

Lx1

13/64in.(5mm)

Allen Key

Mx1

Bolt

M6x10mm

Dx2

Bolt

M6x12mm

Ex3

Bottom

Plate

Fx1

Desk

Clamp

Cx1

VESA

Plate

Kx1

Bolt

M4x12mm

M-A x4

Bolt

M4x30mm

M-B x4

Washer

M-C x4

Spacer

L13mm

M-D x4

Supplied Hardware for Step 3-7

Step 1A For Clamp Mounting

Step 3 Step 4-7

Connect Connecting Plate [B] to Arm [A]

- 04 -

0.39in.-2.16in.

10-55mm

1A-2

1.97in.-3.35in.

50-85mm

Max:

2.36in.(60mm)

Secure Desk Clamp [C] to Connecting Plate [B] According to the

Thickness of the Desktop

1A-3 Secure the Mount Assembly to Desktop

1B-2 Secure the Mount Assembly to the Desktop

1B-1

Step 1B For Grommet Mounting

Secure Bottom Plate [F] and Bolt [H] to Arm [A]

- 05 -

M-A

M-C

M-B

M-C

M-D

The tension is preset at 4-5kg.

After hanging the monitor to the

mount, please release the monitor

slowly to prevent it from falling

suddenly

Step 2 Attach the Monitor Plate [K] to the Monitor

Only one bolt size ﬁts your monitor.

Select Monitor Bolts

M4x12mm M4x30mm

Too Long

Correct Correct

Too Short

Option A [Flat Back Monitor (Universal Monitor Plate)]

Option B [Round Back Monitor (Universal Monitor Plate)]

Step 3 Secure the Monitor to Arm Assembly

HEAVY! You may need

assistance with this step.

- 06-

Be sure to keep the arm in

horizontal position during

adjustment. Or else, it would be

diﬃcult to adjust the mount or

damage the mount.

1. If the monitor can stay at the desired height by

itself, no adjustment needed.

2. If the monitor rises up, press the arm to keep it in

horizontal position and then use the 13/64in. (5mm)

Alley key [M] to turn the bolt clockwise(“-” direc-

tion) to reduce tension of the arm only until the

monitor can stay at the desired height by itself.

3. If the monitor falls down, lift the arm to keep it in

horizontal position and then use the 13/64in. (5mm)

Alley key [M] to turn the bolt counter-clockwise(“+”

direction) to increase tension of the arm only until

the monitor can stay at the desired height by itself.

Step 4 Adjust the Gas Spring Tension

Step 5 Rotation Restriction

Non-proper usage directions Proper usage directions

- 07 -

“+” Clockwise: Tighten

“-” Counter-clockwise: Loosen

Situation 1: If the monitor can stay at the desired tilt angle by itself, no adjust-

ment needed.

Situation 2: If the monitor can not stay at the desired tilt angle by

itself, turn the bolt clockwise or counter-clockwise as shown until the monitor

can stay at the desired tilt angle by itself.

If needed, the TV can be levelled

and rotated 360 degree

Step 6 Adjustments

Tilt Adjustment

Level and Rotation Adjustments

- 08 -

Step 7-2 Route the cables along the arm and secure the cable covers to the

arm [A]

Step 7-1 Detach the cable covers from the arm [A]

Note: Loosen the preassembled bolts from the covers,

then pinch the both sides of the bottom end of the

cable covers to make it detach from the arm

Note: Pinch the both side of the bottom end of the

cable cover to make it attach to the arm, then fasten

the bolt to secure the cover to the arm.

Step 7 Route the Cables Along the Arm [A]

- 09 -

Thank you again for

choosing this HUANUO product!

All of us at HUANUO do appreciate your product purchase. We hope that you are

as happy with your product as we designing and manufacturing it for you. We

strive to provide you with the best quality products and services in the industry.

Please share your experience of our product with others at

www.huanuoav.com/reviews if you are satisﬁed. If you have any questions please

don't hesitate to contact us at

Technical Support: 1-800-556-0533 Mon-Fri 10am - 5pm (PST) (USA) (CAN)

Other Info: [email protected] (US/CA)

Please check www.huanuoav.com for more products and company information.

HUANUO oﬀers products

in these categories

Please remember us when you need one.

TV Trays Printer Stands Stand Risers

Desktop Converters Desk Mounts

Monitor Stands Laptop Tables Lap Desks

HUANUO HNSSK4 User manual

Brand: HUANUO

Model: HNSSK4

Category: Flat panel desk mounts

Type: User manual

Download PDF

report

HUANUO HNSSK4 User manual

HUANUO HNSSK4 User manual

Related papers

Other documents