2. MATTEO
  3. C69201

MATTEO C69201 User manual

  • Hello! I have reviewed the installation instructions for the Light fixture C69201. This document provides detailed guidance on mounting the fixture in a junction box, connecting the pre-wired modules and the correct wiring procedures, following a step-by-step guide. I'm able to answer any questions you might have about the installation process or the fixture's features outlined in this document.
  • What should I do before starting the installation?
    Who should install the fixture?
    What should I do with the electrical wiring?
INSTALLATION INSTRUCTIONS SHEET
C69201
Please Note:START FROM HERE
▪
▪
▪
▪
▪
▪
Make sure power is completely off at the fuse box.
Have your fixture installed by a qualified licensed
electrician
Prepare everything in clear area.
Wear gloves at all times during this installation.
Read instructions carefully before you start assembly.
Keep this instruction sheet for future reference.
Technical Support:1-844-628-8368
• All Matteo Lighting fixtures come with pre-wired module(s).
• Unless instructed to do so, please do not touch any part of the module(s) as any
unnecessary contact with the module could cause permanent damage.
THIS LUMINAIRE MUST BE MOUNTED OR SUPPORTED IN A JUNCTION BOX
CE LUMINAIRE DOIT ÊTRE MONTÉ OU SUPPORTÉ DANS UNE BOÎTE
DE JONCTION
www.matteolighting.com
Toll Free. 1.844.628.8368 E. [email protected]
1
2
4
3
5
6
7
Ensure main supply is switched o.
Connect wires according to color (White to White,
Black to Black). Connect all earth plug together onto the
Reconnect power.
Install blub(9) firmly into lampholders (bulbs not provided).
Clear wires, push the canopy(7) to the ceiling, lock the ring(8)
to the ceiling.
/