ADLINK Technology IMB-T10 User manual

Advance Technologies; Automate the World.

Manual Rev.: 2.00

Revision Date: February 24, 2014

Part No: 50-1X003-1000

IMB-T10

Intel® Atom™ Processor D2550

Industrial Mini-ITX Motherboard

User’s Manual

ii Revision History

Revision History

Revision Release Date Description of Change(s)

2.00 2014/02/24 Initial release

Preface iii

IMB-T10

Preface

This document contains proprietary information protected by copy-

right. All rights are reserved. No part of this manual may be repro-

duced by any mechanical, electronic, or other means in any form

without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior

notice in order to improve reliability, design, and function and does

not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, spe-

cial, incidental, or consequential damages arising out of the use or

inability to use the product or documentation, even if advised of

the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global

environmental preservation through compliance with the Euro-

pean Union's Restriction of Hazardous Substances (RoHS) direc-

tive and Waste Electrical and Electronic Equipment (WEEE)

directive. Environmental protection is a top priority for ADLINK.

We have enforced measures to ensure that our products, manu-

facturing processes, components, and raw materials have as little

impact on the environment as possible. When products are at their

end of life, our customers are encouraged to dispose of them in

accordance with the product disposal and/or recovery programs

prescribed by their nation or company.

Trademarks

Product names mentioned herein are used for identification pur-

poses only and may be trademarks and/or registered trademarks

of their respective companies.

iv Preface

Using this Manual

Audience and Scope

The IMB-T10 User’s Manual is intended for hardware technicians

and systems operators with knowledge of installing, configuring

and operating industrial grade computers.

Manual Organization

This manual is organized as follows:

Preface: Presents copyright notifications, disclaimers, trade-

marks, and associated information on the proper usage of this

document and its associated product(s).

Chapter 1, Introduction: Introduces the IMB-T10, its features,

applications, and specifications, including functional descriptions

and board layout.

Chapter 2, Hardware Information: Provides technical informa-

tion on connectors, jumpers and pin assignments for configuring

the IMB-T10.

Chapter 3, Getting Started: Describes how to install components

and drivers on the IMB-T10.

Chapter 4, BIOS Setup: Presents information and illustrations to

help understand and configure the system BIOS.

Appendix A, WDT Sample Code: Presents information on under-

standing and configuring the watchdog timer.

Important Safety Instructions: Presents safety instructions all

users must follow for the proper setup, installation and usage of

equipment and/or software.

Getting Service: Contact information for ADLINK’s worldwide

offices.

Preface v

IMB-T10

Conventions

Take note of the following conventions used throughout this

manual to make sure that users perform certain tasks and

instructions properly.

NOTE:

Additional information, aids, and tips that help users perform

tasks.

CAUTION:

Information to prevent minor physical injury, component dam-

age, data loss, and/or program corruption when trying to com-

plete a task.

WARNING:

Information to prevent serious physical injury, component

damage, data loss, and/or program corruption when trying to

complete a specific task.

vi Preface

This page intentionally left blank.

Table of Contents vii

IMB-T10

Table of Contents

Revision History...................................................................... ii

Preface.................................................................................... iii

List of Figures........................................................................ ix

List of Tables.......................................................................... xi

1 Introduction ........................................................................ 1

1.1 Package Contents ............................................................... 1

1.2 Overview.............................................................................. 2

1.3 Features............................................................................... 2

1.4 Specifications....................................................................... 3

1.5 Block Diagram ..................................................................... 5

1.6 Functional Description ......................................................... 6

1.7 Mechanical Dimensions....................................................... 8

2 Hardware Information........................................................ 9

2.1 Rear I/O Layout ................................................................... 9

2.2 Rear I/O Connector Pin Definitions.................................... 10

2.3 Board Layout ..................................................................... 14

2.4 Onboard Connector Pin Definitions ................................... 16

2.5 Jumper Settings................................................................. 25

3 Getting Started ................................................................. 27

3.1 Screw Holes....................................................................... 27

3.2 Pre-installation Precautions............................................... 27

3.3 Installation of Memory Modules (SO-DIMM)...................... 28

3.4 Expansion Slots (PCI, PCI Express and Mini-PCIe/mSATA) 28

3.5 Driver Installation............................................................... 29

4 BIOS Setup........................................................................ 31

viii Table of Contents

4.1 Introduction........................................................................ 31

4.1.1 UEFI Menu Bar..............................................................31

4.1.2 Navigation Keys.............................................................32

4.2 Main Screen....................................................................... 33

4.3 Advanced Screen............................................................... 34

4.3.1 CPU Configuration.........................................................36

4.3.2 CPU Configuration.........................................................37

4.3.3 Storage Configuration....................................................39

4.3.4 Super IO Configuration..................................................40

4.3.5 ACPI Configuration........................................................41

4.3.6 USB Configuration.........................................................43

4.4 Hardware Health Event Monitoring System....................... 44

4.5 Boot Screen....................................................................... 46

4.6 Security Screen.................................................................. 47

4.7 Exit Screen......................................................................... 48

A Appendix: WDT Sample Code ..........................................51

Important Safety Instructions............................................... 55

Getting Service...................................................................... 57

List of Figures ix

IMB-T10

List of Figures

Figure 1-1: IMB-T10 Block Diagram...................................................5

Figure 1-2: IMB-T10 Board Dimensions.............................................8

Figure 2-1: IMB-T10 Rear I/O Layout.................................................9

Figure 2-2: IMB-T10 Board Layout...................................................14

xList of Figures

This page intentionally left blank.

List of Tables xi

IMB-T10

List of Tables

Table 1-1: IMB-T10 General Specifications......................................4

Table 2-1: Board Layout Legend ....................................................15

xii List of Tables

This page intentionally left blank.

Introduction 1

IMB-T10

1 Introduction

This chapter will introduce the IMB-T10, its features, specifica-

tions, functional description, and mechanical layout.

1.1 Package Contents

Please check that your package contains the items below. If

you discover damaged or missing items, please contact your

vendor.

X IMB-T10 Mini-ITX Embedded Motherboard

X I/O shield

WARNING:

DO NOT install or apply power to equipment that is damaged

or if there is missing/incomplete equipment. Retain the ship-

ping carton and packing materials for inspection. Please con-

tact your ADLINK dealer/vendor immediately for assistance.

Obtain authorization from your dealer before returning any

product to ADLINK.

2Introduction

1.2 Overview

The ADLINK IMB-T10 is a Mini-ITX embedded motherboard

based on the Intel® Atom™ Processor D2550 built on 32-nm pro-

cess technology in Micro-FCBGA118 packaging technologies and

the Mobile Intel® NM10 Express Chipset. The IMB-T10 is ideal for

embedded applications requiring fanless operation and ultra-low

power consumption in a standard small form factor motherboard

with a complete set of I/O functions and high-bandwidth network

connectivity. These features, combined with an SO-DIMM socket

supporting DDR3 800/1066 SDRAM up to 4 GB, SATAII/mSATA

storage interfaces, PCI and Mini PCIe expansion slots, VGA,

HDMI, dual-channel and single channel 24-bit LVDS, and audio

interfaces make the IMB-T10 suitable for medical, transportation,

and other applications requiring a low noise/power, space-effi-

cient, multiple display platform.

1.3 Features

X Mini-ITX form factor (170 mm x 170 mm)

X Intel® Atom™ Processor D2550:

Z 1.86 GHz core frequency

Z 1024KB L2 cache

Z Micro-FCBGA559 packaging technology

X DDR3-800/1066 up to 4GB max. (1x 204-pin SO-DIMM

socket)

X Supporting dual independent display

X Dsub-15 connector up to 1920 x1200 @ 60Hz

X HDMI connector up to 1920 x1200 @ 60Hz

X One single channel 24bit LVDS resolution up to 1440 x 900

@ 60Hz and one dual channel 24bit LVDS resolution up to

1920 x 1080 @ 60Hz PCI and Mini PCIe expansion slots

X 2x SATA ports 3Gb/s, 9x RS-232 serial + 1x RS-

232/422/484 ports (2 ext., 8 int.)

X 2x GbE, 7x USB 2.0 (4 ext., 3 int.)

X 1x Mini-DIN for PS/2 keyboard/mouse

X RoHS compliant

Introduction 3

IMB-T10

1.4 Specifications

System

CPU Intel® Atom™ Processor D2550

• 1.86 GHz core frequency

• 1024KB L2 cache

• FCBGA559 package

Chipset • Intel® NM10 Express Chipset

Memory • DDR3 800/1066 SO-DIMM (4GB max.)

• 1x 204-pin SO-DIMM slot

BIOS • AMI® uEFI BIOS, 16Mbit SPI Flash ROM

Audio • Realtek ALC887 HD Audio

• Line-out and mic-in

Watchdog Timer • 1-255 second/minute programmable

Hardware Monitor • CPU/System temperature, fan speed and onboard DC

voltage

Operating System • Microsoft® Windows® 7 32-bit

• Fedora™ 19

Display

Graphics

Processor

• Intel® Graphics Media Accelerator 3650 integrated in

CPU supporting dual independent display

VGA • 1x VGA resolution up to 1920 x 1200 @ 60Hz

HDMI • 1x HDMI (version 1.3a) resolution up to 1920 x 1200 @

60Hz

Ethernet

Controller • Realtek RTL8111E GbE controller

Ports • 2x RJ-45 Ethernet port

4Introduction

Table 1-1: IMB-T10 General Specifications

I/O Interfaces

Serial ATA • 2x SATA 3 Gb/s, one shared with mSATA (selected by

jumper)

• 1x mSATA SSD module (Mini-PCIe Full Card form

factor), mSATA SATA shared with PCIe /USB2.0

Onboard I/O • 7x USB 2.0 (4x external, 3x by pin header), one

additional USB 2.0 pin header is available only when

Mini-PCIe card USB 2.0 is not occupied

• 9x RS-232 serial ports (1x external, 8x by pin header),

1x RS-232/422/485 (selected by jumper)

Rear I/O • 2x RJ-45 LAN ports

• 4x USB 2.0 ports

• 1x RS-232 serial port; 1x RS-232/422/485 (COM1)

• 1x D-Sub VGA connector

• 1x HDMI connector

• 1x screw type DC Jack

• 2x audio jacks (line-out and mic-in)

SIM Card • SIM card slot onboard

Expansion Slots • 1x Mini-PCIe full card support

(shared with USB 2.0, mSATA)

•1x PCI slot

• 1x PCIe x1 slot compliant with PCI Express Base 1.0a

specification (only for flying cable solution due to slot

location limitation)

Power

DC Power • 1x Screw type DC-Jack

• +12V DC-in

Mechanical and Environment

Form Factor • Mini-ITX Embedded Motherboard

Dimensions • 170 mm x 170 mm (L x W)

Operating Temp. • 0°C to 60°C

Storage Temp. • -20ºC to 80ºC

Rel. Humidity • 10 - 90% RH

Safety • CE, FCC Class A

Introduction 5

IMB-T10

1.5 Block Diagram

Figure 1-1: IMB-T10 Block Diagram

CH7511B

DMI

SPI Bus

SATA Port0

AMI SPI 16M ROM

PLTRST#

PCIe x1 Bus

PLTRST#

NTC6627UD

NUVOTON

Super I/O

Processor

Line

Out

MIC

Atom D2550

Intel

NM10

INTEL

DDR3 x1

Channel A

VGA Conn

800 / 1066 MHz

PLTRST#

Mini PCIE x1

WLAN

High-Speed USB

Rear x4 port

PCIe x1 Bus

USB 2.0

PLTRST#

Realtek

RTL8111E GLAN1

Realtek

RTL8111E GLAN2

PCI Bus

PLTRST#

PCI x1

RTL ALC887

Audio Codec

Audio Header

DDI1

DDI0

HDMI Conn

LVDS2

1-ch/24bits

LVDS

Header x4 port

PS/2 KB_MS

Header

GPIO Header

(2x8, 2.0mm Header)

7 GPI

7 GPO

+5V & GND

Rear COM Ports

COM_1(RS232/422/485)

COM_2(RS232)

Internal COM Ports

(2x20, 2.0mm Header)

COM_3(RS232)

COM_4(RS232)

COM_5(RS232)

COM_6(RS232)

LVDS1

2-ch/24bits

LPC Bus

SATA Port1

SATA x1

PI2DBS6212ZHE

(SATA Switch)

NXP CBTL04083BBS

(SATA Switch)

USB 2.0 x 1

SIM Card

socket

PCIe x1 Bus

PCIe x 1 slot

NCT5104D

Internal COM Ports

(2x20, 2.0mm Header)

COM_7(RS232)

COM_8(RS232)

COM_9(RS232)

COM_10(RS232)

6Introduction

1.6 Functional Description

Processor Support

The IMB-T10 embedded motherboard is equipped with the Intel®

Atom™ Processor D2550 in Micro-FCBGA11 packaging technol-

ogy. Implemented in 32nm process technology, the Intel® Atom™

D2550 is power-optimized to deliver robust performance per watt

for cost-effective embedded applications. Features include:

X 1.86 GHz core speed and 10 watts TDP

X Hyper-Threading Technology

Intel® NM10 Express Chipset

The IMB-T10 is based on the Intel® NM10Express Chipset It pro-

vides rich I/O capabilities and flexibility via high-bandwidth inter-

faces such as PCI Express, PCI, Serial ATA, and Hi-Speed USB

2.0 connectivity, and also provides an Intel® High Definition Audio

interface.

DDR3 memory

To meet the requirements of memory-intensive applications, the

IMB-T10 has a single-channel memory architecture supporting a

DDR3 800/1066 MHz SO-DIMM. The high-bandwidth memory

specification meets the requirements of the latest 3D graphics,

multimedia, and network application, and boosts system perfor-

mance by eliminating bottlenecks.

Intel® Graphics Media Accelerator GMA 3650

The Intel® Graphics Media Accelerator (GMA) 3650 provides an

integrated 3D graphics engine delivering sophisticated graphics

for large display applications. With support for DirectX 9 hardware

acceleration and 640 MHz display clock The Intel GMA 3650 pro-

vides a cost-effective and high-performance graphics solution.

The MB-T10 supports dual independent display technology,

enabling different content to be displayed on two separate display

terminals or a single workspace to be stretched across two display

devices.

Introduction 7

IMB-T10

Gigabit Ethernet

The IMB-T10 is equipped with the Realtek 8111E PCI Express

GbE controller.

Serial ATA

Storage is efficient and secure with the Serial ATA interface. Utiliz-

ing the Intel® NM10, the IMB-T10 supports two Serial ATA devices

capable of reading/writing data at up to 3 Gb/s. The SATA specifi-

cation improves chassis airflow via thinner and more flexible

cables with lower pin count. One of the two SATA interface is

shared with the mSATA module in Mini PCIe form factor (selected

by jumper).

USB 2.0

The IMB-T10 incorporates the Universal Serial Bus (USB) 2.0

specification that increases peripheral connection speed from 12

Mbps (USB 1.1) to 480 Mbps. USB 2.0 is backward compatible

with USB 1.1.

Hardware Monitoring

A built-in, proactive hardware monitoring system monitors the

CPU temperature, system temperature, and voltage levels to pre-

vent overheating and/or component damage, effect timely failure

detection, and ensure stable supply of current for critical mother-

board components.

Watchdog Timer

The watchdog timer (WDT) monitors system operations based on

user-defined configurations. The WDT can be programmed for dif-

ferent time-out periods, such as from 1 to 255 seconds or from 1 to

255 minutes. The WDT generates a reset signal, then a reset

request, after failure to strobe it within the programmed time

period. A register bit may be enabled to indicate if the watchdog

timer caused the reset event. The WDT register is cleared during

the power-on sequence to enable the operating system to take

appropriate action when the watchdog generates a reboot.

8Introduction

1.7 Mechanical Dimensions

Figure 1-2: IMB-T10 Board Dimensions

Page is loading ...

ADLINK Technology IMB-T10 User manual

ADLINK Technology IMB-T10 User manual

Related papers

Other documents