ADLINK Technology MIX-220 User manual

Brand: ADLINK Technology

Model: MIX-220

Type: User manual

Advance Technologies; Automate the World.

Manual Rev.: 2.00

Revision Date: June 4, 2012

Part No: 50-1Z126-1000

MIX-220

Embedded Computer System with

MI-220 Mini-ITX Motherboard

User’s Manual

ii Revision History

Revision History

Revision Release Date Description of Change(s)

2.00 2012/06/04 Initial release

Preface iii

MIX-220

Preface

This document contains proprietary information protected by copy-

right. All rights are reserved. No part of this manual may be repro-

duced by any mechanical, electronic, or other means in any form

without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior

notice in order to improve reliability, design, and function and does

not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, spe-

cial, incidental, or consequential damages arising out of the use or

inability to use the product or documentation, even if advised of

the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global

environmental preservation through compliance with the Euro-

pean Union's riction of Hazardous Substances (RoHS) directive

and Waste Electrical and Electronic Equipment (WEEE) directive.

Environmental protection is a top priority for ADLINK. We have

enforced measures to ensure that our products, manufacturing

processes, components, and raw materials have as little impact on

the environment as possible. When products are at their end of

life, our customers are encouraged to dispose of them in accor-

dance with the product disposal and/or recovery programs pre-

scribed by their nation or company.

Trademarks

Product names mentioned herein are used for identification pur-

poses only and may be trademarks and/or registered trademarks

of their respective companies.

iv Preface

Using this Manual

Audience and Scope

The MIX-220 User’s Manual is intended for hardware technicians

and systems operators with knowledge of installing, configuring

and operating embedded single board computers.

Manual Organization

This manual is organized as follows:

Preface: Presents copyright notifications, disclaimers, trade-

marks, and associated information on the proper usage of this

document and its associated product(s).

Chapter 1, Introduction: Introduces the MIX-220, its features,

specifications and mechanical dimensions.

Chapter 2, Getting Started: Presents information on chassis lay-

out, setup and operation of the MIX-220.

Chapter 3, Hardware Information: Provides

information about

fan removal/replacement, connectors and pin assignments

Important Safety Instructions: Presents safety instructions all

users must follow for the proper setup, installation and usage of

equipment and/or software.

Getting Service: Contact information for ADLINK’s worldwide

offices.

Preface v

MIX-220

Conventions

Take note of the following conventions used throughout this

manual to make sure that users perform certain tasks and

instructions properly.

NOTE:

Additional information, aids, and tips that help users perform

tasks.

CAUTION:

Information to prevent minor physical injury, component dam-

age, data loss, and/or program corruption when trying to com-

plete a task.

WARNING:

Information to prevent serious physical injury, component

damage, data loss, and/or program corruption when trying to

complete a specific task.

vi Preface

This page intentionally left blank.

vii

MIX-220

Table of Contents

Revision History...................................................................... ii

Preface.................................................................................... iii

List of Figures........................................................................ ix

List of Tables.......................................................................... xi

1 Introduction ........................................................................ 1

1.1 Overview.............................................................................. 1

1.2 Features............................................................................... 2

1.3 Specifications....................................................................... 3

1.4 Mechanical Drawing ............................................................ 5

2 Getting Started ................................................................... 7

2.1 Packing List ......................................................................... 7

2.2 Chassis Layout .................................................................... 8

2.3 Installing the CPU.............................................................. 12

2.4 Installing the CPU Cooler .................................................. 14

2.1 Installing the CPU Cooler .................................................. 14

2.5 System Memory................................................................. 15

2.6 SATA Drive Installation...................................................... 16

2.7 Installing PCIe/PCI Cards.................................................. 20

2.8 Wall Mount Brackets.......................................................... 21

2.9 Powering Up...................................................................... 22

2.10 Driver Installation............................................................... 23

3 Hardware Information...................................................... 25

3.1 Fan Removal and Replacement ........................................ 25

3.2 I/O Connector Pin Definitions ............................................ 28

viii

Important Safety Instructions............................................... 33

Getting Service...................................................................... 35

List of Figures ix

MIX-220

List of Figures

Figure 1-1: MIX-220 Dimensions (without wall mount brackets)........5

Figure 1-2: MIX-220 Dimensions (with wall mount brackets).............6

Figure 2-1: MIX-220 Front/Rear Panel...............................................8

Figure 2-2: MIX-220 Drive Bay and Fan Access................................9

xList of Figures

This page intentionally left blank.

List of Tables xi

MIX-220

List of Tables

Table 1-1: MIX-220 General Specifications......................................4

xii List of Tables

This page intentionally left blank.

Introduction 1

MIX-220

1 Introduction

This chapter will introduce the MIX-220, its features, specifica-

tions, and mechanical layout. For detailed information on the

MI-220 Mini-ITX industrial motherboard, refer to the user manual

downloadable from the ADLINK website:

http://www.adlinktech.com/PD/web/PD_detail.php?cKind=&pid=1014

1.1 Overview

The MIX-220 is an embedded computer system based on the

MI-220 Mini-ITX form factor industrial motherboard supporting

32nm process quad/dual-core Intel® Core™ i7/i5/i3 and Celeron®

processors, Intel® QM67 Express chipset and Dual Channel

DDR3 1066/1333MHz (up to 8GB) in two SODIMM slots. Features

include integrated Intel® HD Graphics (VGA, DVI-D, HDMI out-

puts), dual Gigabit Ethernet, six USB 2.0 ports, four serial ports

(1x RS-232/422/485, 3x RS-232), and an externally accessible

anti-shock drive bay for two 2.5” SATA 6Gb/s drives.

The MIX-220 provides a PCIe x16 slot and PCI slot with card

holder for add-on cards up to 190mm in length, and a PCI Express

Mini Card slot for SSD or Wi-Fi module. Active cooling is provided

by dual 6cm fans with air filters that are easily accessible for

cleaning or replacement, and wall mount brackets allow for flexible

installation.

2Introduction

1.2 Features

X Embedded computer system (330 mm x 212 mm x 88 mm)

X Supports Intel® Core™ i7/i5/i3 and Celeron® processors,

rPGA988B package in Socket G2

X Integrated Intel® HD Graphics with VGA, DVI-D, HDMI out-

puts (features dependent on CPU model)

X 2x GbE (Intel® 82579LM, 82574L controllers)

X 6x USB 2.0 ports (2x front, 4x rear)

X Anti-shock drive bay for two 2.5” SATA 6Gb/s drives

X Four serial ports (1x RS-233/422/485, 3x RS-233)

X PCIe x16 slot, PCI slot, PCI Express Mini Card slot

X HD audio with Mic, Line In, Line Out

X Dual 6cm fans with air filters

X 250W FlexATX AC power supply

X Wall mount brackets

X Mounting point for Wi-Fi antenna

X RoHS compliant

Introduction 3

MIX-220

1.3 Specifications

System

CPU • Intel® Core™ i7-2710QE, 2.1GHz, 6M L2 Cache, 32nm,

45W TDP

• Intel® Core™ i5-2510E, 2.5GHz, 3M L2 Cache, 32nm,

35W TDP

• Intel® Core™ i3-2330E, 2.2GHz, 3M L2 Cache, 32nm,

35W TDP

• Intel® Celeron® B810, 1.6GHz, 2M L2 Cache, 32nm,

35W TDP

Chipset • Intel® QM67 Express Chipset

Memory • Dual-Channel DDR3 1066/1333MHz, 2x 204-pin

SO-DIMM sockets, up to 8GB

BIOS • AMI BIOS with 32 Mb SPI flash memory

Graphics • Integrated Intel® HD Graphics (features dependent on

CPU model)

Ethernet • 2x GbE (Intel® 82579LM, 82574L controllers)

• Wake on LAN supported

Audio • Realtek ALC892 HD audio

Watchdog Timer • 1-255 second/minute programmable

Hardware Monitor • CPU temperature and supply voltages

Operating System • Windows XP/7 32/64-bit, Fedora 14,

Red Hat Enterprise Linux 5

I/O Interfaces

Front I/O • 2x USB 2.0 ports

Rear I/O • 2x RJ-45 LAN ports

• 4x USB 2.0 ports

• 1x DB-15 VGA connector

• 1x DVI-I connector (DVI-D signals only)

• 1x HDMI type A connector,

• 4x serial port connectors

• 3.5mm jacks for line-in, line-out and mic-in

• 1x PCI expansion slot

• 1x PCIe expansion slot

LEDs/Switches • Power, HDD (drive activity)

• On/Off button

• Reset button (recessed)

4Introduction

Table 1-1: MIX-220 General Specifications

Power Requirements

Input • 100-240 VAC universal

Mode •ATX power

Mechanical and Environment

Dimensions • 330 mm x 212 mm x 88 mm (W x D x H)

Operating Temp. • 0°C to 50°C

Storage Temp. • -20ºC to 75ºC

Rel. Humidity • 10% to 90%, non-condensing

Certifications • CE, FCC Class A

Introduction 5

MIX-220

1.4 Mechanical Drawing

Figure 1-1: MIX-220 Dimensions (without wall mount brackets)

Dimensions in mm

233.2

221.2

87.2

93.6

330

Rear View

Top View

Le View Right View

Front View

6Introduction

Figure 1-2: MIX-220 Dimensions (with wall mount brackets)

Dimensions in mm

140

87.2

92.2

330

360

380

233.2

221.2

180

Rear View

Top View

Le View Right View

Front View

Getting Started 7

MIX-220

2 Getting Started

The following chapter describes how to set up the MIX-220.

2.1 Packing List

Unpack the contents of the shipping carton. Please check that

your package contains the items below. If you discover damaged

or missing items, please contact your vendor.

Z MIX-220 Embedded Computer System

Z Accessory kit: drive bay mounting hardware, wall mount

brackets, AC power cord (US)

Z Driver CD

Z MI-220 Motherboard Quick Reference Guide

WARNING:

DO NOT install or apply power to equipment that is damaged

or if there is missing/incomplete equipment. Retain the ship-

ping carton and packing materials for inspection. Please con-

tact your ADLINK dealer/vendor immediately for assistance.

Obtain authorization from your dealer before returning any

product to ADLINK.

CAUTION:

To prevent damage to the system, ensure there is sufficient

clearance around the air vents for unrestricted airflow. The air

temperature inside the enclosure could rise above the speci-

fied operating temperature limits if the airflow through the vents

is restricted.

8 Getting Started

2.2 Chassis Layout

Front and Rear Panels

Connect the desired peripheral devices (e.g. monitor, key-

board, mouse, LAN) to the system. Refer to Figure 2-1 below

for connector locations.

Figure 2-1: MIX-220 Front/Rear Panel

HDD/Power LEDs

On/Off

Switch

Reset

Front Panel

USB

Rear Panel

USB/LAN

HDMI

VGADVI

PCIe slot PCI slot

COM1/2 COM3/4

AC in

Page is loading ...

ADLINK Technology MIX-220 User manual

ADLINK Technology MIX-220 User manual

ADLINK Technology MIX-220 User manual

Related papers

Other documents