Wincor Nixdorf J1-CPU User manual

Brand: Wincor Nixdorf

Model: J1-CPU

Category: Server/workstation motherboards

Type: User manual

This manual is also suitable for

Motherboard J1-CPU

POS Motherboard

J1-CPU

User Manual

We would like to know your opinion on this publication.

Please send us a copy of this page if you have any constructive criticism.

We would like to thank you in advance for your comments.

With kind regards,

Wincor Nixdorf International GmbH

Documentation R&D SAT22

Wohlrabedamm 31

D-13629 Berlin

E-Mail: retail.documentation@wincor-nixdorf.com

Order No.: 01750228406°

Your opinion:

POS Motherboard

J1-CPU

User Manual

Edition November 2012

All brand and product names mentioned in this document are trademarks of their

respective owners.

The reproduction, transmission or use of this document or its contents is not permitted without

express authority.

Offenders will be liable for damages. All rights, including rights created by patent grant or

registration of a utility model or design, are reserved.

Delivery subject to availability; technical modifications possible.

Refer to protection notice ISO 16016

Contents

Overview ...................................................................................................... 1

Introduction.................................................................................................... 1

Highlights of Cedar Trail J1 Motherboard ...................................................... 1

Motherboard Specification ......................................................................... 3

Motherboard Mechanical Arrangement ......................................................... 4

Motherboard PCB Dimension ........................................................................ 5

External I/O Connector .................................................................................. 5

Internal I/O Connector ................................................................................... 6

Jumper Setting .............................................................................................. 7

Maximum Power Consumption ...................................................................... 7

Typical Power Consumption .......................................................................... 7

Maximum Current Rating for external Peripherals ......................................... 8

Supported Power Modes (Sx) ....................................................................... 8

Thermal Management ................................................................................... 9

CPU Support ................................................................................................. 9

Memory Support ............................................................................................ 9

Graphics Subsystem ................................................................................... 10

System Clock Generator ............................................................................. 11

Gigabit LAN Interface .................................................................................. 11

Super I/O Controller .................................................................................... 11

SATA II Interface ......................................................................................... 12

CPU Fan and System Fans ......................................................................... 12

Audio ........................................................................................................... 12

USB Interface .............................................................................................. 13

Serial Interfaces COM1-6 ............................................................................ 13

PS/2 Keyboard Interface ............................................................................. 13

Front Panel Interface ................................................................................... 14

Cash Drawer Interface I/O 310h .................................................................. 14

Intrusion Detect Interface ............................................................................ 14

TPM ............................................................................................................. 14

System Beeper ............................................................................................ 15

PCIe Slot ..................................................................................................... 15

PCI Slot ....................................................................................................... 15

Mini PCIe Slot .............................................................................................. 15

RMT Feature ............................................................................................... 15

Connector and Pin Assignments ............................................................. 16

External Connectors .................................................................................... 16

PS/2 Connector ...................................................................................... 16

Gigabit LAN Connector ........................................................................... 16

USB Connectors ..................................................................................... 17

COM1 Connector .................................................................................... 17

COM2*-6* Connectors ............................................................................ 18

DVI-I Connector ...................................................................................... 19

DisplayPort Connector ............................................................................ 20

Audio Connector ..................................................................................... 21

Connectors and Headers for internal Connection ........................................ 21

SATA ....................................................................................................... 21

USB Header ............................................................................................ 22

Front Panel Interface Connector ............................................................. 23

Cash Drawer Interface Connector ........................................................... 23

Fan Connector (with FAN speed control) ................................................ 24

Intrusion Interface ................................................................................... 24

ATX Power .............................................................................................. 24

PCI Express x1 ....................................................................................... 25

PCI .......................................................................................................... 25

RMT ........................................................................................................ 28

Internal Speaker out ................................................................................ 28

Mini PCIe ................................................................................................ 28

Technical Data ........................................................................................... 31

Changing the Battery ................................................................................ 34

Addendum: Sleep States .......................................................................... 35

UEFI BIOS Setup ........................................................................................ 36

Standard UEFI BIOS Version ...................................................................... 36

BIOS Menu Bar ....................................................................................... 37

Legend Screen ........................................................................................ 37

General Help ........................................................................................... 38

Scroll Bar ................................................................................................ 38

Sub-Menu ............................................................................................... 38

Info Screen .................................................................................................. 39

Product Name: ........................................................................................ 40

BIOS Version: ......................................................................................... 40

BIOS Date: .............................................................................................. 40

Ethernet MAC Address: .......................................................................... 40

Windows XP Graphics Support: .............................................................. 40

UUID Info: ............................................................................................... 40

System, Main board, Power Supply: ....................................................... 40

Main Menu ................................................................................................... 41

System Date [XX/XX/XXXX] ................................................................... 41

System Time [XX: XX: XX] ...................................................................... 41

Advanced Menu ........................................................................................... 41

Advanced Menu ........................................................................................... 42

Sub Menu  Trusted Computing ............................................................ 42

Security Device Support [Enable] ........................................................ 42

TPM State [Disable] ............................................................................. 42

Pending operation [None] ................................................................... 42

Advanced Menu ........................................................................................... 43

Sub Menu > Hardware Configuration ...................................................... 43

 Intel GMCH Configuration ................................................................... 46

Advanced Menu .......................................................................................... 47

Sub Menu  CPU Configuration ............................................................. 47

Advanced Menu .......................................................................................... 48

Sub Menu  SATA Configuration ........................................................... 48

Advanced Menu .......................................................................................... 49

Sub Menu  USB Configuration ............................................................. 49

Advanced Menu .......................................................................................... 50

Sub Menu  IO Port Configuration ......................................................... 50

Advanced Menu .......................................................................................... 51

Sub Menu  H/W Monitoring .................................................................. 51

Boot Menu ................................................................................................... 52

‘#n’ Boot Device ...................................................................................... 52

Security Menu ............................................................................................. 53

Administrator Password .......................................................................... 53

Intrusion Detection [Disabled] ................................................................. 53

Save & Exit Menu ........................................................................................ 54

Save Changes and Exit .......................................................................... 54

Discard Changes and Exit ...................................................................... 54

Save Changes and Reset ....................................................................... 54

Discard Changes and Reset ................................................................... 55

Restore Defaults ..................................................................................... 55

Boot Override .......................................................................................... 55

Launch EFI Shell from filesystem device ................................................ 55

Test Points Codes ....................................................................................... 56

Checkpoint Ranges ..................................................................................... 56

SEC Phase .................................................................................................. 56

PEI Phase ................................................................................................... 57

PEI Beep Codes .......................................................................................... 60

DXE Phase .................................................................................................. 60

DXE Beep Codes ........................................................................................ 62

Abbreviations ............................................................................................ 63

POS Motherboard with J1-CPU 1

Overview

Introduction

This specification describes the features of a Motherboard based on the

INTEL Cedarview processor and NM10 chipset in mITX form factor.

This Cedar Trail Motherboard (J1 for short) is designed for integration

into Wincor BEETLE / X plus sealed systems and other POS systems like

BEETLE /i8A, the BEETLE /SII+ family and the EPC ATS.

Highlights of Cedar Trail J1 Motherboard

Intel ATOM processor Cedarview (dual core), min. 2GHz

Integrated Graphics Core supporting VGA+DVI (DVI-I), Display Port

HDD SATA II interface (2 ports)

Fan-less Motherboard design, supports chassis fan with automatic PWM

speed control

Intel Gigabit LAN on board

Two DDR3 SDRAM (SO-DIMM) socket, up to 4GB / 1066MHz supported

One PCI Express slot

One PCI slot (supports riser card only)

One mini PCI Express slot with LPC support for TPM and NVRAM

module

6 COM ports (5 ports have the option to be powered COM interfaces)

Onboard RJ11 remote control interface RMT (power save button)

8 USB ports

PS/2 connector, supports keyboard and mouse via Y-cable

Cash Drawer support on board

2 POS Motherboard with J1-CPU

Intel HD audio controller with Realtek audio codec supporting micro-

phone, line in and amplified speaker out

Optional NVRAM and TPM module support via mini PCIe

OS support includes Windows 7 (32 Bit), Windows 8 (32 Bit),

XP (32 Bit), Linux

Long term availability (5 years; Intel embedded roadmap)

POS Motherboard with J1-CPU 3

Motherboard Specification

LVDS

Video (LVDS)

NM10

D2700 / 2.13GHz

internal digital

RMT connector RJ11

3.3VSB, 1.8V, 1.5V, 1.05V

mini PCIe Slot

PCIe x1

DVI level shifter

Block Diagram

System Power

SPI

Cash Drawer CPLD

PCIe x1

LAN 1GB

Intel 82583V

USB Port 1~8

HD Audio Codec

ALC262

SATA2

Module

SATA-II 1,2

2 DDR III

Intel ATOM Processor

DDRIII

VRD 12

SODIMM

DDR3 800/1066MHz, 4GB max

1-Phase PWM

RGB

PCI express x1

PCIe x1 Slot

LPC SIO

Tiger Point

SPI

LPC

USB2.0

DMI

5 COM*

HD Audio Link

1 COM

Audio AMP

TEA2025B

5M40ZE64

Flash ROM

PS/2

KEYBOARD

Clock

Cedar View-D

analog Video

digital Video

Digital and

DVI-I

PCI 32Bit 33MHz

PCI riser slot

ATX input

4 POS Motherboard with J1-CPU

Motherboard Mechanical Arrangement

POS Motherboard with J1-CPU 5

Motherboard PCB Dimension

J1 motherboard (including I/O shield) follows mITX standard and therefore

PCB mechanical dimension is 170mm by 170mm.

External I/O Connector

External I/O connectors are arranged as illustrated here:

COM1

COM3COM2

LAN/USB

AUDIO

K/M/USB

COM4

RMT

DVI-I

6 POS Motherboard with J1-CPU

Interface Connector Type

COM1 9 pin D-sub male

DVI + VGA DVI-I

RMT RJ11

Keyboard, Mouse, USB 6 pin Mini Din + stacked dual USB series A

LAN, USB RJ45 Ethernet + stacked dual USB series A

Display Port Standard Display Port connector

AUDIO Speaker Out 3,5 mm female (green)

AUDIO Line In 3,5 mm female (violet)

AUDIO Microphone 3,5 mm female (blue)

Internal I/O Connector

Interface Connector Type

DDR3 SODIMM 204 pin micro edge connector

Hard disk (SATA) 2pcs 7 pin Standard SATA headers

3.3V, 5V, 12V supply ATX 20 pin power connector

USB port 1-4 2x5 pin headers, 2.54 mm

COM* 2-6 2x7 pin headers (2.0 mm shrouded)

FAN 2pcs 4 pin

PCIe standard PCIe x1 connector

PCI standard PCI connector

Mini PCIe Full size and half size mini PCIe connector

Front panel 2x6 pin header, 2.54 mm

Chassis intrusion 3 pins header (2.0 mm shrouded)

Cash drawer 6 pins header (2.0 mm shrouded)

Internal speaker 2 pins header (2.0 mm)

POS Motherboard with J1-CPU 7

Jumper Setting

Jumper Connector Type Setting

JP1 CMOS clear 1-2 default, 2-3 CMOS clear

Maximum Power Consumption

The J1 motherboard is powered by 3.3V, 5V, 5V stand by, 12V and -12V

from a standard ATX power supply. The maximum current is specified as

follows, this does not include external connected peripherals.

Voltage I max P

3.3V 0.5A 1.5W

5V 0.2A 1W

5VSB 0.5A 2.5W

12V 1.5A 18W

-12V 0.1A 1.2W

Typical Power Consumption

The J1 motherboard’s typical power consumption is listed below. Test

condition is motherboard and no peripherals, keyboard, mouse, USB

devices, COM port not connected, Ethernet link and memory configuration

as mentioned below, Windows 7, 32Bit idle.

Voltage Condition I P

3.3V 0.3A 1W

5V 0.15A 0.75W

5VSB (S0)

S0 No Ethernet link 0.12A 0.6W

S0 100MBit 0.18A 0.9W

S0 1GB 0.35A 1.75W

8 POS Motherboard with J1-CPU

S3 (no WOL) 0.12A 0.6W

S3 (WOL 10MBit) 0.15A 0.75W

S5 (no WOL) 0.055A 0.3W

S5 (WOL 10MBit) 0.11A 0.55W

12V

2GB 0.75A 9W

4GB 0.85A 10.2W

Intel Max Power 1.35A 16.2W

-12V 0.09A 1.1W

Maximum Current Rating for external Peripherals

Interface Voltage I /P max

Powered COM (COM 2-6 summery) 5V 1A

Powered COM single port 5V 0.3A

Powered COM (COM 2-6 summery) 12V 1A

Powered COM single port 12V 0.6A

USB, single port 5V 0.5A

USB, all ports summary 5V 2A

PS/2 5V 0.5A

DVI, VGA 5V 0.1A

Display Port 3.3V 0.1A

PCI or PCIe card all 10W

Supported Power Modes (Sx)

J1 Motherboard supports power states S0, S3, S4 and S5. Wake up events

from sleep states are supported from USB ports, COM1 ring indicator, inter-

nal CMOS clock, PS/2 Keyboard or Mouse and Ethernet.

Power management supports ACPI 3.0 and APM1.2

POS Motherboard with J1-CPU 9

Thermal Management

The J1 Motherboard supports 1 FAN connector with 4 pin PWM fan type.

The 2

FAN connector is reserved for power supply fan and detects rotating

speed of PSU fan.

Supported CPUs and its TDP and maximum junction temperature:

CPU TDP Idle power Max Tj

Cedarview 10W 2W typ. 100 °C

NM10 2W 1W 115 °C

CPU Support

Due to the fact Atom CPU comes in a BGA package it is soldered to PCB

and cannot be changed.

Processor Core Clock Speed Footprint Max TDP

CedarVIEW 2 2.13GHz FCBGA 10W

Memory Support

The motherboard has 2 SODIMM sockets supporting single channel, unbuff-

ered, no ECC DDR3 SDRAM.

Supports total memory size of 1 GB, 2 GB and 4 GB max

Supports 1-Gb, 2-Gb and 4-Gb densities technologies

(for both x8 and x16)

DRAM Chip Data Width: x8, x16

Banks / DRAM Chip: 8

Support DIMM page size of 4KB and 8KB

The motherboard supports the following memory features:

800 /1066 MHz unbuffered SDRAM SO-DIMM

10 POS Motherboard with J1-CPU

Non-ECC

1.5V voltage rating

BIOS automatically detects memory type, size, and speed

If higher frequency memory modules than 1066MHz are used, the frequency

will be limited to 1066MHz automatically.

Warning

SODIMM2 (lower socket) must always be populated first!

Graphics Subsystem

Graphics support is via the internal graphics accelerator of the Cedarview

processor to provide dual independent display.

Main features of integrated GPU are:

640 MHz render clock frequency

Seven display planes, Display Plane A, B, Display Sprite C (can be

connected to either pipes), Display OV (can be connected to either

pipes), Cursor A, Cursor B and VGA

Two display pipes, Pipe A and B support the dual independent displays

Max Pixel Clock: DDI: 2x 4, 1.62GHz, 2.7GHz; VGA: up to 350MHz

DVI-I, Display Port, CRT/DAC supported, independent DDC for all

interfaces

External monitor: CRT/DAC via DVI-I, DVI, Display Port

Support Intel® Display Power Saving Technology (Intel® DPST) 4.0

No Frame Buffer Compensation (FBC)

No TV-Out

Regarding driver related features please see latest information on Intel’s

homepage.

The analogue VGA port utilizes an integrated 350MHz RAMDAC capable of

driving a standard progressive scan monitor resolution up to 1920 x 1200 at

60Hz.

POS Motherboard with J1-CPU 11

Signal

Voltage Level

R,G,B 0.7VP-P @75OHM

HSYNC, VSYNC 5.0V

DDC Channel

Open drain, 5.0V tolerant

The digital DVI interface is converted from DP interface with active level

shifter IC and supports a maximum resolution of 1920 x 1200 pixels.

The Display Port interface supports a maximum resolution of 2560 x 1600

pixels.

System Clock Generator

The clock generator is conforming to CK505 specification and Cedar View

demands and made by IDT ICS9VRS4339.

Gigabit LAN Interface

Gigabit LAN interface is provided thru a cost effective PCI-e based GigaBit

Ethernet Controller made by Intel 82583V.

Super I/O Controller

Super I/O controller IT8783 from ITE provides the following functions:

6 16C550 UARTs

PS/2 controller

Automatic Fan Speed controller

Tachometer inputs

Hardware monitor

12 POS Motherboard with J1-CPU

SATA II Interface

SATA Port NM10 Usage on Motherboard

Port #0 On-board connector

Port #1 On-board connector

The NM10 has two integrated SATA host controller that supports independ-

ent DMA operation and data transfer rates up to 3.0Gb/s.

CPU Fan and System Fans

The J1 motherboard supports automatic fan speed control by pulse width

modulation (PWM). A 4 pin fan can be used as system fan. A 3 pin fan can

also be used, but automated fan speed control is not supported in this case.

The 2nd fan connector FAN2 is intended to sense power supply fan.

System FAN Connector Used as

All systems FAN1 System fan

FAN2 Power supply

Audio

An INTEL HD Audio Link is provided through NM10. It is used with a Realtek

HD Audio Codec ALC662.

Supported interfaces are:

Speaker-out / Line-out (switch by assembling option)

Internal mono speaker out (onboard connector, not in I/O shield)

Mic-in

Line-in

An onboard stereo audio power amplifier which is capable of delivering typi-

cally 2W per channel of continuous average power to an 8 ohm load with

10% THD is provided if the audio output is to drive an external or internal

speaker.

Page is loading ...

Wincor Nixdorf J1-CPU User manual

Brand: Wincor Nixdorf

Model: J1-CPU

Category: Server/workstation motherboards

Type: User manual

This manual is also suitable for

Motherboard J1-CPU

Download PDF

report

Wincor Nixdorf J1-CPU User manual

This manual is also suitable for

Wincor Nixdorf J1-CPU User manual

Related papers

Other documents