Novation Launchpad S User guide

Novation
Brand
Novation
Model
Launchpad S
Type
User guide

This manual is also suitable for

Novation Launchpad S is a powerful and versatile MIDI controller that can be used to control a wide range of music software and hardware. With its 64 velocity-sensitive pads, Launchpad S can be used to trigger clips, play drums, or control other parameters in your music software. It also features a built-in sequencer, so you can create and record your own musical ideas.

Launchpad S is perfect for both live performance and studio production. Its compact size and lightweight design make it easy to take with you wherever you go, and its intuitive layout makes it easy to learn and use. Whether you're a beginner or a pro, Launchpad S is a great way to take your music to the next level.

Novation Launchpad S is a powerful and versatile MIDI controller that can be used to control a wide range of music software and hardware. With its 64 velocity-sensitive pads, Launchpad S can be used to trigger clips, play drums, or control other parameters in your music software. It also features a built-in sequencer, so you can create and record your own musical ideas.

Launchpad S is perfect for both live performance and studio production. Its compact size and lightweight design make it easy to take with you wherever you go, and its intuitive layout makes it easy to learn and use. Whether you're a beginner or a pro, Launchpad S is a great way to take your music to the next level.

Advanced
Features
Guide
version 1.00
written by Alex Lucas
© 2013 Focusrite Audio Engineering Ltd
About T
About TAbout T
About This
his his
his Guide
GuideGuide
Guide
Launchpad S features a hidden bootloader which provides access
to advanced features. This guide explains how to use the
bootloader to reconfigure the Launchpad S to meet the
requirements of its intended use.
How to Enter the Bootloader
How to Enter the BootloaderHow to Enter the Bootloader
How to Enter the Bootloader
To enter the bootloader, simply hold down the session, user 1,
user 2 and mixer buttons while connecting the USB cable. These
buttons are highlighted in Figure 1. It will be apparent that the
bootloader has loaded as the LEDs will light as shown in Figure 2.
At this point the buttons can be released.
Figure 1.
Figure 1. Figure 1.
Figure 1.
Entering the bootloader.
Entering the bootloader.Entering the bootloader.
Entering the bootloader.
Hardware ID
Hardware IDHardware ID
Hardware ID
In applications where more than one Launchpad is being used, it
may be desirable to assign each Launchpad a different ID. This
will ensure that each Launchpad can be uniquely recognised by
the computer every time it is connected, so that MIDI instructions
can be directed to the appropriate unit.
The top two rows, illuminated yellow, are used to select a
hardware ID from 1 to 16. The brightest LED indicates the device
ID currently selected. When a new ID is chosen, text will scroll
across the Launchpad S displaying its number.
Power Modes
Power ModesPower Modes
Power Modes
The Launchpad S has two power modes, low and full. Each mode
can be selected in the bootloader by pressing the corresponding
red button. Low-power mode is selected by default and has the
benefit of allowing the Launchpad S to be bus powered by an
iPad or a passive USB hub.
In full-power mode, the LEDs are far brighter. This mode is
recommended if the Launchpad S is being used with a standard
desktop/laptop computer, and particularly in daylight. The
Launchpad S will not work with an iPad if it is in full-power mode
unless a separate powered USB hub is used.
Figure 2.
Figure 2. Figure 2.
Figure 2.
Bootloader mode functions.
Bootloader mode functions.Bootloader mode functions.
Bootloader mode functions.
Bootloader and Firmware Version
Bootloader and Firmware VersionBootloader and Firmware Version
Bootloader and Firmware Version
The two green buttons in the bottom left-hand corner are used to
display the version numbers of the bootloader and firmware
loaded on the Launchpad S.
Exiting the Bootloader
Exiting the BootloaderExiting the Bootloader
Exiting the Bootloader
The bottom right-hand green button is used to exit the
bootloader and change over to the main firmware.
Firmware Update
Firmware UpdateFirmware Update
Firmware Update
Firmware updates may be made available in the future via the
Launchpad S downloads page on the Novation website. Updates
will be provided in the form of a System Exclusive (.syx) file. This is
a standard file format used by manufacturers for configuring
equipment.
The new firmware may be loaded onto the Launchpad S only
whilst it is in bootloader mode. The procedure is as follows:
1. Download the firmware as a System Exclusive (.syx) file
from the Novation website.
2. Connect the Lauchpad S in bootloader mode to a Mac or
Windows PC.
3. Open the System Exclusive file in MIDI-OX for Windows
PC or Sysex-Librarian for Mac, available from:
http://www.midiox.com/
http://www.snoize.com/SysExLibrarian/
4. Select the Launchpad S as the MIDI output device.
5. Play the file.
Text will scroll across the Launchpad to indicate that an upgrade
is taking place. Once the update has finished the bootloader will
exit. The bootloader can be used subsequently to view the version
number of the main firmware. This is a useful way to check that
the update has been successful. Note that the bootloader itself
will not be updated; just the main firmware.
http://www.novationmusic.com
  • Page 1 1
  • Page 2 2
  • Page 3 3

Novation Launchpad S User guide

Novation
Brand
Novation
Model
Launchpad S
Type
User guide
This manual is also suitable for

Novation Launchpad S is a powerful and versatile MIDI controller that can be used to control a wide range of music software and hardware. With its 64 velocity-sensitive pads, Launchpad S can be used to trigger clips, play drums, or control other parameters in your music software. It also features a built-in sequencer, so you can create and record your own musical ideas.

Launchpad S is perfect for both live performance and studio production. Its compact size and lightweight design make it easy to take with you wherever you go, and its intuitive layout makes it easy to learn and use. Whether you're a beginner or a pro, Launchpad S is a great way to take your music to the next level.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents