Dynasty Spas in.k600 User manual
- Category
- Security access control systems
- Type
- User manual
Dynasty Spas in.k600: Experience luxury and control at your fingertips! With its advanced full-function keypad, you can effortlessly manage all spa functions and customize your spa experience. Control pumps, blower, and spa light, activate the economy mode for energy savings, or engage the standby mode to stop all pumps simultaneously. The built-in timers for each function ensure peace of mind and prevent overheating.
Dynasty Spas in.k600: Experience luxury and control at your fingertips! With its advanced full-function keypad, you can effortlessly manage all spa functions and customize your spa experience. Control pumps, blower, and spa light, activate the economy mode for energy savings, or engage the standby mode to stop all pumps simultaneously. The built-in timers for each function ensure peace of mind and prevent overheating.
• Select
Spa
to view Spa menu.
Spa to view Spa menu.Spa
Starting Pump 1
•
Select
Pump 1
to turn Pump
1 on.
•
Select
Pump 1
repeatdely
to control
repeatdely to control repeatdely
pump 1 speeds.
(20 minute built-in timer)
Starting Light
• Select
Light
key to turn light on.
• Select
Light
key again to turn
light off.
(120 minute built-in timer)
Next menu page
• Press
Next
key to display the next
page in the spa menu.
Goes to
b
lower option
Turning Economy on
L
owers the temperature set point of
the spa by 20˚F (11˚C).
• Select
Economy
to activate the
Economy mode.
• Select
Economy
again to override
economy programming (see spa
setup section)
Standby Mode
S
tops all pumps at the same time by a
simple click of a button!
• Select
Standby
to activate
this mode.
• Select
Standby
to again to resume
normal operations.
S
ystem automatically returns to
Normal mode after a certain period
of time, unless the Standby mode has
been reactivated.
Spa light will fl ash for a few seconds
before the exit of Standby mode and
restart the pumps. The "Standby"
message is also displayed during
Standby mode.
* Pump will stay turned on if there is a
request for more heat.
Displaying time
• Press
Ok
key
to display the time.
• Press
Ok
key a second time
Ok key a second time Ok
to go
back to water temperature display.
Viewing active progress bars
A progress bar is a visual indicator of
the time remaining before a device
is turn off or before the end of the
Standby mode. Only one bar is
displayed at the time.
• Use
Left
or
Left or Left
Right
keys to visualize
Right keys to visualize Right
the progress bar of each activa-
ted device.
This menu allows control of all pumps, blower and spa light, as well as the
activation of the Economy and Standby modes. Every time a device is on,
its animated icon is displayed. All pump activity can be stopped at once by
activating the
Standby
mode.
Standby mode.Standby
Main
Functions
•
Start
Pump 1
Start Pump 1Start
• Start Pump2
• Start
Light
• Starting Blower
• Economy
Mode
• Standby Mode
•
Display Time
• Progress Bars
Starting Pump 2
• Select
Pump 2
to turn Pump 2 on.
• Select
Pump 2
once more to turn
pump 2 off.
(20 minute built-in timer)
Starting Blower
• Select
Blower
to turn Blower on.
Blower to turn Blower on.Blower
• Select
Blower
once more to turn
b
lower
off.
lower off.lower
(20 minute built-in timer)
• Press
Mode
key to display the
key to display the
mode Selection window.
Quick Reference Card
Please consult your
spa user manual for c
omplete info on
the features of your sp
a sys
tem
.
Starting Pump 3
• Select
Pump
3
to turn Pump 3 on.
• Select
Pump
3
once more to turn
pump 3 off.
(20 minute built-in timer)
Please consult your
spa user manual for c
omplete info on
in.k600
Advanced series of full-function
keypads that give
complete control to wet fi ngers!
Aeware's new se
ries of
keypads
ries of keypadsries of
features
a high profi le with a
large
LCD display,
menu-dri
ven
interface
and raised keys that let users easily control all in.xm functions
and programming directly from spa side,
creating a true and unique user experience.
Description
Pump
icons
AM/PM (˚F/ ˚C)
Time, temperature
& message digits
Progress bar icon
Menu title
Operation Mode
Operation Mode
Information
Display
Status icons
Light
icons
Light iconsLight
"Ok" Key
"Next" Key goes to
menu page
"Mode" Key
selects mode of
operation: Spa,
Audio, Options
Audio, Options
"Right"
"Right"
Multi-
Multi-
function
function
Key
Key
"Minus" Key
decreases par-
ameter setting
"Left" Multifunction
Key
goes back to previous
parameter setting or
increases parameter value
"Soft" Key 1,
2, 3, 4
"Plus" Key increases
parameter setting
Service icon
Lock
icon
Lock iconLock
Other
Settings
•
Keypad display
• Sound
• Regio
nal
• Security
Time setting
S
ystem info
•
Time of day
•
Spa
• Hea
ter
• Keypad
• Res
et
• Upgrade
Programming
•
Filter
cycles
• Economy Mode
•
Reminders
•
Warni
ngs
www.geckoalliance.c
om
Setting fi lter cycles
start time
The display will show the starting hour
previously set.
• Use
(
+
)
or
(
-
)
k
ey
to select hour
ey to select hour ey
setting.
•
Use
Right
key to set minutes.
•
Use
(
+
)
or
(
-
)
key
to change minutes
key to change minuteskey
.
•
Select
Next
arrow on screen
menu to go to the next parameter
:
fi lter cycle duration.
Setting cycle duration
Here we se
t a
value for
the fi lter cycle
duration,
in hours and minut
es.
• Use
(
+
)
or
(
-
)
key
to set hour setting.
key to set hour setting.key
•
Use
Right
key to set minutes.
• Use
(
+
)
or
(
-
)
key
to change minutes.
key to change minutes.key
•
Select
Next
arrow on screen
menu to save changes and go to
the next parameter: fi lter cycle
frequency.
Setting fi lter cycle frequency
Here we se the
n
umber of fi ltering
cycles that the system will perfom
per day.
• Use
(
+
)
or
(
-
)
key to select frequency
setting.
• Select
Enter
option on screen
Enter option on screen Enter
menu to save changes and go to
back to spa options main menu.
Setting Economy start time
• Select
Next
arrow
Next arrowNext
arrow arrow
on screen
menu to save changes and go to
economy cycle start hour.
•
Use
(
+
)
or
(
-
)
key
to set hour setting.
key to set hour setting.key
• Use
Left
key to access minutes
Left key to access minutes Left
option.
•
Use
(
+
)
or
(
-
)
key
to set minutes.
key to set minutes.key
• Select
Next
arrow
Next arrowNext
arrow arrow
on screen
menu to save changes and go to the
next parameter stop economy.
Setting Economy stop time
•
Use
(
+
)
or
(
-
)
key
to set hour setting.
key to set hour setting.key
•
Use
Left
key to access minutes
option.
•
Use
(
+
)
or
(
-
)
key
to set minutes.
key to set minutes.key
• Select
Enter
option on screen
Enter option on screen Enter
menu to save changes and go to back
to spa options menu.
Setting Economy mode
•
Select
Economy
Setting maintenance
reminder
prompts
This menu allows you to activate/
deactivate or simply reset the
maintenance reminder prompts.
•
Select
Reminder
option
Reminder optionReminder
Turning reminders on/off
•
Use
(
+
)
or
(
-
)
key
to activate or
key to activate or key
deactivate prompt(s).
•
Select
Next
arrow on screen menu
Next arrow on screen menu Next
to save changes and go to next menu
screen.
Viewing spa reminders
The reminder icon will show up
to prompt you to review active
maintenance messages.
Resetting prompt messages
• Use
L
eft
LeftL
or
eft or eft
R
ight
keys
ight keys ight
to review
one by one all active maintenance
messages.
• Select
Enter
option on screen
Enter option on screen Enter
menu to reset message and view next
task or go back to main menu.
Viewing spa reminders
Spa warnings
This menu allows for you
to view all
active warning messages ie:. hot water.
•
Select
W
arning
WarningW
option
arning optionarning
Viewing spa warnings
The warning icon icon shows up to
prompt you to review active warning
messages.
Turning warnings on/off
•
Use
L
eft
LeftL
or
eft or eft
R
ight
keys to review all
ight keys to review all ight
warning messages.
•
Press
Mode
key again to go back to
main menu.
Turning warnings on/off
Setting keypad display
options
This sub-menu is used to set keypad
display settings such as: contrast,
backlight
,
backlight, backlight
etc.
•
Select Display options
Adjusting contrast
•
Use
Left
or
Left or Left
Right
keys to adjust
Right keys to adjust Right
desired level of contrast.
•
Select
Next
arrow on display to
Next arrow on display to Next
save changes and go to next
screen menu.
Adjusting backlight
•
Use
Left
or
Left or Left
Right
keys to adjust
Right keys to adjust Right
backlight brigtness.
•
Select
Next
arrow on display to
Next arrow on display to Next
save changes and go to next
screen menu.
Normal/Reverse display
•
Use
(
+
)
or
(
-
)
key
to activate or
deactivate reverse display.
•
Select
Next
arrow on display to
Next arrow on display to Next
save changes and go to next
screen menu.
D
isplay orientation (inverting)
•
Use
(
+
)
or
(
-
)
key
to activate or
deactivate reverse display.
• Select
Enter
option on screen
Enter option on screen Enter
menu to back to keypad
main menu.
Setting keypad audio
options
This sub-menu is used to set keypad
audible options setting such as:
keypad on (key beep) and alarm
.
•
Select
S
ound
options
Kepad beep on/off
•
Use
(
+
)
or
(
-
)
key to activate or
deactivate reverse display.
•
Select
Next
arrow on
Next arrow onNext
display to
save changes and go to next
screen menu.
Turning alarm sound on
•
Use
(
+
)
or
(
-
)
key
to activate or
deactivate alarm sound.
•
Select
Next
arrow on display to
Next arrow on display to Next
save changes and go to next
screen menu.
Setting regional settings
This sub-menu is used to set keypad
regional settings such as: language,
select temperature display units and
choose a format for time display.
•
Select
R
egional
options
Setting language
•
Use
(
+
)
or
(
-
)
to select from: English,
Français Spanish & Deutsch
•
Select
Next
arrow on display to
Next arrow on display to Next
save changes and go to next
screen menu.
Temperature units
Water temperature can be displayed
in °F or °C.
•
Use
(
+
)
or
(
-
)
to change setting.
•
Select
Next
arrow on display to
Next arrow on display to Next
save changes and go to next
screen menu.
Selecting time format
•
Use
(
+
)
or
(
-
)
to change setting.
•
Select
Next
arrow on display to
Next arrow on display to Next
save changes and go back to keypad
main menu.
Security options
Partial keypad lock: basic functions
of the spa remain accessible (pump
and light outputs) but it's impossible
to change the temperature Set Point,
or to enter Programming mode. Full
lock: all keys are disabled. When the
keypad is locked, the icon will be
displayed.
•
Select
S
ecurity
options
ecurity optionsecurity
Partial keypad lockout
•
Use
(
+
)
or
(
-
)
key to select "Partial".
• Select
Enter
option on screen
Enter option on screen Enter
menu to back to keypad main menu.
To unlock the keypad:
•
Select
Mode
key
•
Press and hold
Option
key for
5 seconds
Full keypad lockout
•
Use
(
+
)
or
(
-
) key
to select
"Full".
• Select
Enter
Enter Enter
option on screen
menu to back to keypad main menu.
To unlock the keypad, press
and hold
Light
key for 5 seconds.
Light key for 5 seconds.Light
keypad is locked, the icon will be
Resetting keypad
programmed
values
•
Press
O
k
to reset back to default
k to reset back to default k
factory values.
•
Select
Next
arrow
Next arrowNext
arrow arrow
on display to
next screen menu.
Viewing information about
spa
Spa
s
oftware ID number and version
are displayed.
•
Select
Next
arrow
Next arrowNext
arrow arrow
on display to
next screen menu.
Viewing information on
heater software
Heater s
oftware ID number and
version are displayed.
•
Select
Next
arrow
Next arrowNext
arrow arrow
on display to
next screen menu.
Viewing information on
keypad
software
Keypad
s
oftware ID number and
version are displayed.
•
Select
Next
arrow
Next arrowNext
arrow arrow
on display to
next screen menu.
Upgrading keypad software
• Use
Ok
key to start the upgrade of
Ok key to start the upgrade of Ok
the software of the keypad.
• Select
Enter
option on screen
Enter option on screen Enter
menu to back to keypad main menu
and not upgrade
the software of the
keypad.
9919-100
713
Viewing information about
the system
To v
iew spa equipment data such as:
system, heater and keypad software
version, to reset programmed settings
and to upgrade keypad software.
•
Press
M
ode
key
•
Select
O
ptions
menu
ptions menuptions
•
Select
I
nfo
sub-menu
Programming spa system
To program the fi lter cycle, you must
enter these parameters: start time,
duration and frequency. During a
fi lter cycle, pumps run for one minute
to purge the plumbing, then Pump
1 runs for the programmed number
of hours.
•
Press
M
ode
key
•
Select
O
ptions
menu
ptions menuptions
•
Select
Spa
sub-menu
Spa sub-menuSpa
•
Select
Filter
option
To program keypad setti
ngs
•
Press
M
ode
key
•
Select
O
ptions
menu
•
Select
K
eypad
KeypadK
sub-menu
Setting Economy status
• Use (
+
)
key to enable the economy
mode, the display will show
On
.
• Use (
-
)
key to disable economy
mode, the display will show
Off
.
Off.Off
Setting the time
•
Press
M
ode
key
•
Select
O
ptions
menu
ptions menuptions
•
Select
C
lock
setting
Setting hour settings
•
Use
(
+
)
or
(
-
) key
to set hour setting.
) key to set hour setting.) key
•
Use
Left
or
Left or Left
Right
keys to access
minutes option.
•
Use
(
+
)
or
(
-
) key
to set minutes.
) keyto set minutes.) key
• Select
Enter
option on screen
Enter option on screen Enter
menu to back
to keypad main menu.
-
1
-
2
Dynasty Spas in.k600 User manual
- Category
- Security access control systems
- Type
- User manual
Dynasty Spas in.k600: Experience luxury and control at your fingertips! With its advanced full-function keypad, you can effortlessly manage all spa functions and customize your spa experience. Control pumps, blower, and spa light, activate the economy mode for energy savings, or engage the standby mode to stop all pumps simultaneously. The built-in timers for each function ensure peace of mind and prevent overheating.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
