Gecko in.k600 md Quick Start Card

in.k600 md
Gecko
Brand
Gecko
Model
in.k600 md
Category
Security access control systems
Type
Quick Start Card

Gecko in.k600 md gives you the power to control your spa experience like never before. With its user-friendly interface, high-profile design, and large LCD display, you can easily adjust settings, activate economy mode, or turn on the light with just a few taps. Program filter cycles, set maintenance reminders, and customize keypad settings to suit your preferences, ensuring your spa is always ready when you are.

Gecko in.k600 md gives you the power to control your spa experience like never before. With its user-friendly interface, high-profile design, and large LCD display, you can easily adjust settings, activate economy mode, or turn on the light with just a few taps. Program filter cycles, set maintenance reminders, and customize keypad settings to suit your preferences, ensuring your spa is always ready when you are.

Description
Main functions
Quick Reference Card
Pleaseconsultyourspausermanualforcompleteinfoonthefeaturesofyourspasystem.
in.k600
™
Advanced series of full-function keypads that give complete control to wet ngers!
Aeware's®newseriesofkeypadsfeaturesahighprolewithalargeLCDdisplay,menu-driveninterfacethatletuserseasilycontrol
allin.xm™functionsandprogrammingdirectlyfromspaside,creatingatrueanduniqueuserexperience.
Pump
icons
Lockicon
Time,temperature
&messages
Progressbaricon
Menutitle
OperationMode
Informationdisplay
Status
icons
Light
icon
OKKey
NextKeygoes
tomenupage
ModeKey
selectsmodeof
operation:Spa,
Audio,Options
Right
Multi-
function
Key
-Key
decreasespar-
ametersetting
LeftMultifunction
Keygoesbackto
previousparameter
settingorincreases
parametervalue
SoftKey1,
2,3,4
+Keyincreases
parametersetting
Service
icon
AM/PM
(˚F/˚C)
• SelectSpatoviewSpamenu.
Starting Pump 1
• SelectPump 1toturnPump1on.
•SelectPump 1repeatedly
tocontrolpump1speed.
(20minutebuilt-intimer)
Starting all accessories*
•PresstheQuick On/Offbutton
tostartallaccessories(pumps
andturbines)inhighspeed.
•PresstheQuick On/Offbutton
againtostopallaccessories
(pumpsandturbines).Thereis
anintegrated120minutetimer.
Light
•SelectLightkeytoturnlighton.
•SelectLightkeyrepeatedlyto
controllightintensity.Anal
selectionturnslightoff.
(120minutebuilt-intimer)
Next menu page
•PressNext keytodisplay
thenextpageinthespamenu.
Goestobloweroption
Thismenuallowscontrolofall
pumps,blower,andspalight,
aswellastheactivationofthe
EconomyandStandbymodes.
Animatediconsaredisplayed
whendevicesareon.Allpump
activitycanbestoppedatonce
byactivatingtheStandbymode.
Starting Pump 2*
• SelectPump 2toturnPump2on.
•SelectPump 2repeatedly
tocontrolpump2speed.
(20minutebuilt-intimer)
• PressModekeytodisplay
themodeSelectionwindow.
Starting Pump 3*
• SelectPump 3toturnPump3on.
•SelectPump 3oncemore
toturnpump3off.
(20minutebuilt-intimer)
Water temperature settings
• PressPlus/Minuskeystoselect
watertemperaturesetting.
• PressOKorwait5seconds
toconrmnewsetting.
The“SetPoint”promptindicates
thedesiredtemperatureNOT
thecurrentwatertemperature.
*optionavailabledependinguponfactorysettings
Economy Mode
Lowersthetemperaturesetpoint
ofthespaby20˚F(11˚C).
•SelectEconomy toactivate
theEconomymode.
•SelectEconomy againtoover-
rideeconomyprogramming
(seespasetupsection).
Standby Mode
Stopsallpumpsatthesametime
byasimpleclickofabutton!
•PressStandbytoactivate
thismode.
•PressStandbyagaintoresume
normaloperations.
Systemautomaticallyreturns
toNormalmodeafteracertain
periodoftime,unlesstheStandby
modehasbeenreactivated.
Spalightwillashforafew
secondsbeforetheexitof
Standbymodeandrestartthe
pumps.The"Standby"message
isalsodisplayedduringStandby
mode.
*Pumpwillstayturnedonifthere
isarequestformoreheat.
Displaying time
• PressOKkeytodisplaythetime.
•PressOKkeyasecondtimeto
gobacktowatertemperature
display.
Viewing active progress bars
Aprogressbarisavisualindicator
ofthetimeremainingbeforea
deviceisturnedoff.Onlyone
barisdisplayedatthetime.
•UseLeftorRightkeys
tovisualizetheprogressbar
ofeachactivateddevice.
Starting Blower*
•PressBlowertoturnBloweron.
•PressBlower oncemoretoturn
bloweroff.
(20minutebuilt-intimer)
Programming
Setting lter cycle start time
Thedisplaywillshowthestarting
hourpreviouslyset.
•Use(+)or(-)keytoselecthour
setting.
•UseRightkeytosetminutes.
•Use(+)or(-)keytochange
minutes.
•SelectNextarrowon
screenmenutogotothenext
parameter:ltercycleduration.
Setting cycle duration
Herewesetavalueforthelter
cycleduration,inhoursand
minutes.
•Use(+)or(-)keytosethour.
•UseRightkeytosetminutes.
•Use(+)or(-)keytochange
minutes.
•SelectNextarrowonscreen
menutosavechangesandgoto
thenextparameter:ltercycle
frequency.
Setting lter cycle frequency
Herewesetthenumberof
lteringcyclesthatthesystemwill
perfomperday.
•Use(+)or(-)keytoselect
frequencysetting.
•SelectEntertosavechanges
andgobacktospaoptions
mainmenu.
Setting Economy mode*
•SelectEconomy
Programming the spa system
Toprogramtheltercycle,you
mustentertheseparameters:start
time,durationandfrequency.
Duringaltercycle,pumpsrun
foroneminutetopurgetheplum-
bing,thenPump1runsforthe
programmednumberofhours.
•PressModekey
•SelectOptionsmenu
•SelectSpasub-menu
•SelectFilteroption
Setting Economy start time
•SelectNextarrowtosave
changesandgotoeconomy
cyclestarthour.
•Use(+)or(-)keytosethour
setting.
•UseLeftkeytoaccessminutes
option.
•Use(+)or(-)keytosetminutes.
•SelectNextarrowtosave
changesandgotothenext
parameterstopeconomy.
Setting Economy stop time
•Use(+)or(-)keytosethour.
•UseLeftkeytoaccessminutes
option.
•Use(+)or(-)keytosetminutes.
•SelectEnteroptiontosave
changesandgobacktospa
optionsmenu.
Setting maintenance reminder
prompts
Thismenuallowsyoutoactivate/
deactivateorsimplyresetthe
maintenancereminderprompts.
•SelectReminder option
Turning reminders on/off*
•Use(+)or(-)keytoactivate
ordeactivateprompt(s).
•SelectNextarrowtosave
changesandgotonextmenu
screen.
Setting Economy status
•Use(+)keytoenablethe
economymode,thedisplaywill
showOn.
•Use(-)keytodisableeconomy
mode,thedisplaywillshowOff.
*optionavailabledependinguponfactorysettings
Viewing spa warnings
Thewarningiconshowsup
topromptyoutoreviewactive
warningmessages.
Resetting prompt messages
•UseLeftorRightkeysto
reviewonebyoneallactive
maintenancemessages.
•SelectEntertoreset
messageandviewnexttask
orgobacktomainmenu.
Spa warnings
Thismenuallowsyoutoview
allactivewarningmessagesi.e.
hotwater.
•SelectWarningoption
Turning warnings on/off
•UseLeftorRightkeystoreview
allwarningmessages.
•PressModekeyagaintogo
backtomainmenu.
Viewing spa reminders
Theremindericonwill
showupwhenyouhaveactive
maintenancemessages.
Setting the time
•PressModekey
•SelectOptionsmenu
•SelectClocksetting
Setting hour settings
•Use(+)or(-)keytosethour.
•UseLeftorRightkeytoaccess
minutesoption.
•Use(+)or(-)keytosetminutes.
•SelectEntertogoback
tothekeypadmainmenu.
Setting keypad display options
Thissub-menuisusedtoset
keypaddisplaysettingssuch
ascontrast,backlight,etc.
•SelectDisplayoptions
Adjusting contrast
•UseLeftorRightkeystoadjust
desiredlevelofcontrast.
•SelectNextarrowon
displaytosavechanges
andgotonextscreenmenu.
Adjusting backlight
•UseLeftorRightkeystoadjust
backlightbrightness.
•SelectNextarrowon
displaytosavechanges
andgotonextscreenmenu.
Normal/Reverse display
•Use(+)or(-)keytoactivate
ordeactivatereversedisplay.
•SelectNextarrowon
displaytosavechanges
andgotonextscreenmenu.
To program keypad settings
•PressModekey
•SelectOptionsmenu
•SelectKeypadsub-menu
Display orientation (inverting)
•Use(+)or(-)keytoactivate
ordeactivateinverteddisplay.
•SelectEnteroptionon
screenmenutobackto
keypadmainmenu.
Setting keypad audio options
Thissub-menuisusedtoset
keypadaudiooptionssuchas:
keypadon(keybeep)
andalarm.
•SelectSoundoptions
Keypad beep on/off
•Use(+)or(-)keytoactivateor
deactivatethekeypadbeep.
•SelectNextarrowon
displaytosavechangesand
gotonextscreenmenu.
Setting regional settings
Thissub-menuisusedtoset
keypadregionalsettingssuchas
language,temperaturedisplay
unitsandformatfortimedisplay.
•SelectRegionaloptions
Alarm sound
•Use(+)or(-)keytoactivate
ordeactivatealarmsound.
•SelectEntertosave
changesandgobackto
mainmenu.
Time setting
Other settings
Resetting keypad programmed
values
•PressOKtoresetbacktodefault
factoryvalues.
•SelectNextarrowondisplay
tonextscreenmenu.
Viewing information about spa
SpasoftwareIDnumber
andversionaredisplayed.
•SelectNextarrowondisplay
tonextscreenmenu.
Viewing information on
heater software
HeatersoftwareIDnumber
andversionaredisplayed.
•SelectNextarrowondisplay
tonextscreenmenu.
Viewing information on
keypad software
KeypadsoftwareIDnumber
andversionaredisplayed.
•SelectNextarrowon
displaytonextscreenmenu.
Upgrading keypad software
•UseOKkeytostarttheupgrade
ofthekeypadsoftware
•SelectEntertogoback
tothekeypadmainmenu
andcancelsoftwareupgrade.
Viewing information about
the system
Toviewspaequipmentdata
andkeypadsoftwareversion,
andtoresetprogrammedsettings
andtoupgradekeypadsoftware.
•PressModekey
•SelectOptionsmenu
•SelectInfosub-menu
Language
•Use(+)or(-)toselectfrom:
English,Français,Español
&Deutsch
•SelectNextarrowondisplay
tosavechangesandgotonext
screenmenu.
Temperature units
Watertemperaturecanbe
displayedin°For°C.
•Use(+)or(-)tochangesetting.
•SelectNextarrowondisplay
tosavechangesandgotonext
screenmenu.
Time format
•Use(+)or(-)tochangesetting.
•SelectEnteronthescreen
menutosavechangesandgo
backtokeypadmainmenu.
Security options
Partialkeypadlock:basicfunc-
tionsofthesparemainaccessible
(pumpandlightoutputs),but
itisimpossibletochangethe
temperatureSetPoint,ortoenter
programmingmode.Fulllock:
allkeysaredisabled.Whenthe
keypadislocked,theiconwill
bedisplayed.
•SelectSecurityoptions
Partial keypad lockout
•Use(+)or(-)keytoselect
"Partial".
•SelectEntertogoback
tothekeypadmainmenu.
Tounlockthekeypad:
•SelectModekey
•PressandholdOptionkey
for5seconds
Full keypad lockout
•Use(+)or(-)keytoselect"Full".
•SelectEntertogobackto
keypadmainmenu.
Tounlockthekeypad,pressand
holdtheLightkeyfor5seconds.
System info
9919-100713-D Rev.06-2013
www.geckoalliance.com
©GroupeGeckoAllianceInc.,2013
Alltrademarksorregisteredtrademarks
arethepropertyoftheirrespectiveowners.
PrintedinCanada06-2013
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Gecko in.k600 md Quick Start Card

in.k600 md
Gecko
Brand
Gecko
Model
in.k600 md
Category
Security access control systems
Type
Quick Start Card

Gecko in.k600 md gives you the power to control your spa experience like never before. With its user-friendly interface, high-profile design, and large LCD display, you can easily adjust settings, activate economy mode, or turn on the light with just a few taps. Program filter cycles, set maintenance reminders, and customize keypad settings to suit your preferences, ensuring your spa is always ready when you are.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents