Air Techniques DBSWIN Imaging Software Quick Start

  • Hello! I've analyzed the provided Quick Start Guide for the Air Techniques CamX series dental cameras. This document outlines the steps for installing the necessary software, configuring the camera, adjusting image settings, and enabling multiple image capture. I am ready to help you with questions about the setup and usage based on the information in this guide.
  • How do I install the software?
    How do I connect the CamX product?
    How do I test the CamX product?
    How do I adjust image settings?
    How do I enable VistaEasy View for multiple image capture?
VistaEasy Quick Start Guide
Load DBSWIN Disc, go to drivers tab
and select VistaEasy Installation.
Follow prompts to install the software.
When the driver setup window
appears, connect CamX product.
Wait for it to be recognized and hit
next to install driver.
Go to Start menu, Air Techniques,
then open Vista Cong to test
CamX product.
Once VistaCong opens, select
camera Icon at top of window,
camera will appear under registered
devices, go to Test tab, then select
Take a Picture. Take a few test shots
with camera. Close VistaCong
program.
Setup in DBSWIN or 3rd Party Imaging
software using the 3rd Party Software
and Conguration Guide provided
in box or found on
www.airtechniques.com
1
2
3
4
5
Quick Start Guide
Optional Settings
Open VistaCong, select camera
icon at top of window, go to Test
tab and select Take a Picture. In
acquisition window, Select Wrench/
Settings icon, then select video
settings. Adjust preferences as
required. Select apply. Repeat at
each work station.
1
Adjust Image Settings
Open VistaCong, go to Settings Tab
(wrench icon). Select the check box
Activate VistaEasy View.
Close VistaCong.
2
Turn on VistaEasy View for Multiple Image Capture
PN 9922-509 Rev. A
/