Brodit 835009 Datasheet

Category
Holders
Type
Datasheet

This manual is also suitable for

27 January, 2015, www.brodit.com, © 2015 Brodit AB
Product 835009
835009 ProClip
Console mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288350097
Item no 835009 fits:
Hyundai Tucson 14-15 (For USA)
1(2)
1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read the instructions and look at the pictures before installing the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Remove the adhesive tape
cover on the ProClip. Place the angled edge on the left side of the ProClip over the console edge.
2. Press down on top of the ProClip so it flexes downward and the angled edge on the lower part of the ProClip
hooks around the lower console edge. Push on the lower part of the ProClip to make sure the angled edge is
hooked all way around.
3. and 4. The ProClip is in place.
2(2)
  • Page 1 1
  • Page 2 2

Brodit 835009 Datasheet

Category
Holders
Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI