Brodit 834924 Datasheet

Product 834924

834924 ProClip

Console mount

The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for

your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is

car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required

and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

EAN: 7320288349244

Item no 834924 fits:

Acura RLX 13-14 (For USA)

1(2)

1. 2.

INSTALLATION INSTRUCTIONS

4.3.

Please read the instructions and look at the pictures before attaching the ProClip.

1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel of the adhesive tape

cover on the ProClip. Place the angled edge on the left side of the ProClip over the console edge.

2. Press down firmly on the right side of the ProClip si the angled edge flexes downward and hooks around the

lower console sidewall edge.

3. Press firmly on the side of the ProClip towards the seem in the console sidewall to make sure tha angled edge

goes all the way into the gap.

4. The ProClip is place.

2(2)

Download PDF