Brodit 854780 Datasheet

Product 854780

854780 ProClip

Angled mount

The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for

your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is

car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required

and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

EAN: 7320288547800

Item no 854780 fits:

Hyundai Genesis Coupé 13-15 (For USA)

1(2)

1. 2.

INSTALLATION INSTRUCTIONS

4.3.

Please read all of the instructions and look at the pictures before attaching the ProClip.

1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the cover of

adhesive tape on the ProClip. Place the right side of the ProClip in front of the air vent and then press the thin

angled edge into the seam/gap between the air vent and the console side wall.

2. Flip the ProClip to the left, towards the center console, so the angled edge on the right side of the ProClip

hooks behind the air vent edge. Place your index fingers behind the ProClip. Pull towards you and hook the

angled edge on the left side of the ProClip around the console edge.

3. Press firmly on the right side of the ProClip so it flexes forward until you hear/feel a click.

4. The ProClip is in place.

2(2)

Download PDF