Brodit 854779 Datasheet

Category
Holders
Type
Datasheet
28 January, 2015, www.brodit.com, © 2015 Brodit AB
Product 854779
854779 ProClip
Center mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288547794
Item no 854779 fits:
Hyundai Genesis Coupé 13-15 (For USA)
1(2)
1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the cover of
adhesive tape on the ProClip. Place the left side of the ProClip in front of the air vent and then press the thin
angled edge into the seam/gap between the air vent and the console side wall.
2. Flip the ProClip to the right, towards the center console, so the angled edge on the left side of the ProClip
hooks behind the air vent edge. Place your index fingers behind the ProClip. Pull towards you and hook the
angled edge on the right side of the ProClip around the console edge.
3. Press firmly on the left side of the ProClip so it flexes forward until you hear/feel a click.
4. The ProClip is in place.
2(2)
  • Page 1 1
  • Page 2 2

Brodit 854779 Datasheet

Category
Holders
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI