A. Windows Users
To install the FlashMover 4-in-1 CF/SD Card Reader on Windows 98/98SE/2000
:
1. Do not Plug the card reader to the PC’s USB port before the installation is
completed.
2. Insert the Driver CD-ROM in the CD-ROM drive.
3. The CD-ROM will auto-run and pop up a Driver Installation Manual Window.
4. In the Driver Installation Manual, select “Compact Flash + Secure Digital”.
5. The driver installation program will run.
6. Follow installation instructions accordingly to complete the driver installation.
7. Reboot your computer.
8. Plug the card reader into your computer USB port.
9. Two new removable drives are added to you computer, the first one is for
Compact Flash, the second one is for SD/MMC. The card reader can now be used as
any other drive on your computer.
10. Insert flash memory cards, then you can access files in your cards.
* Please check our website www.microdia.com
to download the latest driver.
To install the FlashMover 4-in-1 CF/SD Card Reader on Windows Me/XP
:
1. Plug the card reader into your computer USB port.
2. It is fully Plug & Play in Windows Me/XP, no driver installation needed.
3. Two new removable drives are added to you computer, the first one is for
CompactFlash, the second one is for SD/MMC. The card reader can now be used as
any other drive on your computer.
4. Insert flash memory card, then you can access files in your card.