Microdia FlashMover Installation Manual & Operation Manual

Brand: Microdia

Model: FlashMover

Category: Card readers

Type: Installation Manual & Operation Manual

Microdia FlashMover. This multifaceted device is a 16-in-1 USB 2.0 card reader compatible with various flash memory cards, providing seamless data transfer between your devices.

It supports Smart Media, Compact Flash I/II/MD, SD/MMC/MMCplus, MS/MS PRO/MS MG cards, making it a versatile solution for photographers, videographers, and anyone who needs to manage multiple memory cards.

With its Plug-and-Play functionality for Windows ME/XP and Mac OS X 10.1.2 and above, the FlashMover offers effortless connectivity. Simply insert your desired memory card into the corresponding slot, and your computer will recognize it as a removable disk, allowing you to access, edit, and transfer files with ease.

Microdia FlashMover. This multifaceted device is a 16-in-1 USB 2.0 card reader compatible with various flash memory cards, providing seamless data transfer between your devices.

16-in-1 USB2.0 CARD READER

INSTALLATION GUIDE &

OPERATION MANUAL

INSTALLATION GUIDE

Thank you for purchasing MICRODIA FlashMover

16-in-1 USB

2.0 Reader. This FlashMover

16-in-1 USB2.0 Card Reader

works with USB enabled Microsoft Windows 98, 98SE, ME,

2000, XP or above and Mac OS 9/X and higher systems. This

installation guide contains all the information you need to

install your FlashMover

16-in-1 USB2.0 Card Reader.

For Windows Users

To install the FlashMover

16-in-1 USB2.0 Card Reader on Windows 98/98SE/2000:

1. Do not plug the card reader into the PC USB port before the installation is completed.

2. Download the driver from www.microdia.com

or insert the Driver CD in the CD-ROM drive.

3. Double click the [Autorun.exe] after downloading or the CD-ROM will auto-run and follow [Install Wizard] installation

instruction.

4. After installation, reboot your computer.

5. Plug in your card reader into the USB port.

6. There are 4 new removable drives added to your computer.

7. Insert flash memory cards to access files in your cards.

NOTE: Please check MICRODIA

website, www.microdia.com, for downloading the latest driver.

To install the FlashMover

16-in-1 USB2.0 Card Reader on Windows ME/XP:

1. Plug the card reader into your computer USB port.

2. It is fully Plug-&-Play for Windows ME/XP, no driver installation needed.

3. 4 new removable drives are added to your computer after plug in the card reader.

Insert flash memory cards to access files in your cards.

For Macintosh Users

To install the FlashMover

16-in-1 USB2.0 Card Reader on Mac OS 9.X

1. Do not plug the card reader into the USB port before the installation is completed.

2. Download the driver from www.microdia.com

or insert the Driver CD in the CD-ROM drive.

3. Double click [Installer] and follow the [Install Wizard] installation instruction.

4. After installation, plug in your card reader into the USB port.

5. There are 4 new removable drives added to your computer.

6. Insert flash memory cards to access files in your cards.

NOTE:

- Please check MICRODIA

website, www.microdia.com, for downloading the latest driver.

- Please go to Mac website to update the latest version of Mac OS.

To install the FlashMover

16-in-1 USB2.0 Card Reader on Mac OS 10.X and above

1. Please go to Mac OS website for upgrading to Mac OS X 10.1.2, then OS X will automatically detects the card reader.

Removing your flash memory cards from the FlashMover

16-in-1 USB2.0 Card Reader

To remove the flash memory cards on Windows system

1. Close any files that are opened and reside on the flash memory cards.

2. You can remove your cards safely after the LED stop blinking

To remove the flash memory card on Mac system

1. The flash memory cards must be [EJECTED] or [UN-MOUNTED] by dragging the card’s disk icon in the trash.

CAUTION: Failure to properly [EJECT] the card before removing the card from the card reader could case data

loss or corruption.

OPERATION MANUAL

This operation manual contains all the information you need to

operate your FlashMover

16-in-1 USB2.0 Card Reader.

USING 16-in-1 FlashMover

CARD READER

1. Connect 16-in-1 FlashMover Card Reader to the

Computer by USB miniB cable

2. Open My Computer - 4 Removable Disks will be

added. It is now ready for reading/writing

16-in-1 FlashMover

CARD READER FOR SMART MEDIA CARD

Smart Media Pin

1. After connecting the Card Reader to the computer,

you may insert the Smart Media Card

2. Turn the Smart Media Card upside down (e.g. with

the pins of the Smart Media Card facing upward)

3. Insert the Smart Media Card into the slot with pin

facing upward.

4. If the Smart Media Card is inserted correctly, a

LED light on the Card Reader will turn on. If not,

please remove the Card and repeat Steps 3.

5. Open My Computer and double click one of the

Removable Disks such as Removable Disk (F:).

NOTE: The Removable Disk Drive may not be (F:). It is

depended on your computer settings.

6. Removable Disk (F:) will be opened and it is ready

to read/write to the Smart Media Card. Ensure all

operations are completed before removing the

card.

16-in-1 FlashMover

CARD READER FOR Compact Flash

I/II/MD CARD

Compact Flash

I / II Card

1. After connecting the Card Reader to the computer,

you may insert Flash Memory Card

2. 16-in-1 FlashMover

Card Reader is compatible to

Compact Flash

I / II and MD Cards

3. Insert the Compact Flash

I / II / MD Card into

the CFI/II/MD slot.

NOTE: Arrow sign on the card must be facing to the card

reader.

4. If the Compact Flash

I / II / MD Card is inserted

correctly, a LED light on the Card Reader will turn

on. If not, please remove the Compact Flash

I /

II / MD Card and repeat Steps 3.

5. Open My Computer and double click one of the

Removable Disks such as Removable Disk (E:).

NOTE: The Removable Disk Drive may not be (E:). It is

depended on your computer settings.

6. Removable Disk (E:) will be opened and it is ready

to read/write to the Compact Flash

I / II / MD

Card. Ensure all operations are completed before

removing the card.

16-in-1 FlashMover

CARD READER FOR SD

/ MMC

/ MMCplus

CARD

, MMCplus

& MMC

Pin side of MMCplus

TM,

MMC

& SD

(Left to right)

1. After connecting the Card Reader to the computer,

you may insert the Flash Memory Card

2. 16-in-1 FlashMover Card Reader is compatible to

, MMC

, MMCplus

, miniSD

*, microSD

RS-MMC

* & MMCmobile

*, MMCmicro

*, etc.

* Adapter needed

3. Turn the card upside down (e.g. with the pins of

the SD

/MMCplus

/MMC

Card facing upward).

Insert the

/MMC

/MMCplus

Card into the

SD/MMC slot.

NOTE: The contact pins must be facing upward.

4. If the

/MMC

/MMCplus

Card is inserted

correctly, a LED light on the Card Reader will turn

on. If not, please remove the

/MMC

/MMCplus

Card

and repeat Steps 3.

5. Open My Computer and double click one of the

Removable Disks such as Removable Disk (G:).

NOTE: The Removable Disk Drive may not be (G:). It is

depended on your computer settings.

6. Removable Disk (G:) will be opened and it is ready

to read/write to the

/MMC

/MMCplus

Card.

Ensure all operations are completed before

removing the Card.

16-in-1 FlashMover

CARD READER FOR MS / MS PRO / MS MG CARD

MS & MS PRO

7. After connecting the Card Reader to the computer,

you may insert Flash Memory Card

8. 16-in-1 FlashMover

Card Reader is compatible to

MS, MS PRO and MS MG Cards

9. Insert the MS/ MS PRO/MS MG Card into the MS/

MS PRO/MS MG slot.

NOTE: Arrow sign on the card must be facing to the card

reader.

10. If the MS/MS PR/MS MG Card is inserted correctly,

a LED light on the Card Reader will turn on. If not,

please remove the MS / MS PRO / MS MG Card

and repeat Steps 3.

11. Open My Computer and double click one of the

Removable Disks such as Removable Disk (M:).

NOTE: The Removable Disk Drive may not be (M:). It is

depended on your computer settings.

12. Removable Disk (M:) will be opened and it is ready

to read/write to the MS/MS PRO/MS MG Card.

Ensure all operations are completed before

removing the card.

CAUTION!

1. Backup your data before formatting the card as data will be lost.

2. Wait for all operations to be completed before removing the card.

3. The card is designed to fit easily into the system one way only. Do not bend the card or force it into the

slot.

4. Do not touch the connections with your fingers or metal objects.

5. Do not bend or flex the card reader.

(All instructions and handling information should be used in conjunction with the owner’s manuals of your

devices and computer systems.)

** USER ALERT! **

By default, Windows XP or above will format any cards having a capacity greater than 32MB with FAT32 file

system. As most digital cameras can only operate with FAT file system, please select FAT as the file system

when you reformat the card.

For the card with capacity 4.0GB or above, please select FAT32 as the file system when you reformat the

card.

MICRODIA (USA)

Camden Ave., San Jose, CA 95120, USA

MICRODIA (HONG KONG)

International Sales Office

MICRODIA (UK)

Brickhill Drive, Manton Height, Bedford,

MK41 7QH, England

1371, HITEC, Trademart Drive, Kowloon Bay, Hong Kong

Tel: +852.2801.7813 Fax: +852.2801.7060

Web: http://www.microdia.com

Email: [email protected]

Microdia FlashMover Installation Manual & Operation Manual

Brand: Microdia

Model: FlashMover

Category: Card readers

Type: Installation Manual & Operation Manual

Microdia FlashMover. This multifaceted device is a 16-in-1 USB 2.0 card reader compatible with various flash memory cards, providing seamless data transfer between your devices.

Download PDF

report

Microdia FlashMover Installation Manual & Operation Manual

Microdia FlashMover Installation Manual & Operation Manual

Related papers

Other documents