SOFTW ARE I N S TALLATION
Microsoft Windows 2000, XP and Vista do not require any extra installation of software. You only
have to install the software under Microsoft Windows 98SE.
Install the software before connecting up the hardware if you are using Microsoft Windows 98SE.
Simply double-click the setup file on the CD and install the driver. After finishing, restart your PC
and connect the Combo card reader.
H ARDW ARE I N S TALLATION
You don’t have to install any software for Microsoft Windows 2000, XP and Vista.
1. Turn the PC off.
2. Insert the mini USB plug into the Combo card reader
3. Connect the Combo card reader to a free USB port
4. Turn the PC on
5. Windows will find new hardware.
6. The Power LED will be lit
7. The Combo card reader is ready to use.
Never open or repair the device yourself.
This device meets all essential requirements and conditions of the applicable European Directives
OVE R VIE W
B
D
A
C
E