ICIDU SI-707209 User manual

Brand: ICIDU

Model: SI-707209

Category: Card readers

Type: User manual

m a n u a l

S I - 7 0 7 2 0 9

c a r d r e a d e r

I n t e r n a l

u S b 2 . 0

First of all thank you very much for purchasing this internal multi card reader + USB port. You

can use this card reader to speedily transfer photos, music and other ﬁles from various types of

memory cards to your computer and vice verse. The card reader is easy to install; transferring

ﬁles was never so simple.

- c O n t e n t S O F t H e P a c K a G e

- t e c H n I c a l S P e c I F I c a t I O n S

- u S e

- H a r d W a r e I n S t a l l a t I O n

- S O F t W a r e I n S t a l l a t I O n

- W a r r a n t Y

e n G l I S H

c a r d r e a d e r

I n t e r n a l

u S b 2 . 0

c O n t e n t S O F t H e P a c K a G e

Before beginning the installation, check that you have all the required components. The package

should contain:

- Internal 3.5” card reader

- CD with driver and manual

t e c H n I c a l S P e c I F I c a t I O n S

- Multi card reader

- Interface: 1x USB 2.0

- Makes use of a 3.5” bay

- Windows 98SE, 2000, XP Vista and Windows 7

- Mac OS 8.6 or higher

Support for the following memory cards

CF I

PSP11

Hitachi

Ultra Speed

MMC1

MS Pro

Extreme

MS Pro

Ultra

MS ROM

High Speed

MMC2

High Speed

Micro SD

MMC

Pro

MS Pro

High Speed

Select

MS Pro Duo

High Speed

MS Pro Duo

Magic Gate

* adapter required

* *

*** * **

POWER

CF/MD

Memory Stick

Micro SD

SD/MMC

ACT

u S e

This USB 2.0 internal card reader enables you to quickly and easily transfer ﬁles between

various types of memory cards and your PC.

All kinds of ﬁles can be moved, stored, copied and deleted, including documents, ﬁlms, images,

games and music. Ideal for use with your GSM, digital camera or PDA. You can even quickly

connect a USB device, which is then available via the card reader.

H a r d W a r e I n S t a l l a t I O n

Before installing the hardware, take the following precautionary measures:

Ensure that the PC is switched-off and that the power is disconnected. After removing the

screws to open the computer housing, you can install the card reader in a 3.5” bay.

Plug the card reader’s connector to an available USB port (usually blue) on your motherboard.

Before use, we recommend that you consult the manual for your motherboard or computer on

this point.

Once the card reader has been installed, you can replace the cover on the computer housing and

properly reconnect all the cables that you had removed from the PC.

Windows will automatically detect the new hardware upon reboot and load the default drivers

already available in Windows.

As soon as the drivers have been installed, the card reader is ready for use. We advise you to

reboot your computer before using the card reader with USB port.

S O F t W a r e I n S t a l l a t I O n

Windows XP, Vista and/or Windows 7 do not require driver installation. The Plug & Play

technology makes everything very simple. The extra drivers loaded by Windows allow ﬁles from

a range of memory cards to be made accessible and ready for potential processing.

W a r r a n t Y

Unless speciﬁed otherwise, all items sold under the ICIDU name are covered by a 10 year

warranty. No warranty or support is provided for the software and rechargeable batteries that

are provided. Claims under warranty can be made only via the dealer from whom the item was

purchased.

Speciﬁcations can be changed without notice.

All ICIDU products comply with current European safety and environmental standards and

legislation. For further details, visit our website www.icidu.com

ICIDU is a registered trademark. All other brand names and rights in

connection with them are and remain the property of the rightful owner.

All rights expressly reserved

ICIDU SI-707209 User manual

Brand: ICIDU

Model: SI-707209

Category: Card readers

Type: User manual

Download PDF

report

ICIDU SI-707209 User manual

ICIDU SI-707209 User manual

Related papers

Other documents