9
221883 / DN-13006-W Fast Ethernet Print Server, 2-Port USB, 1-Port parallel315353 / DN-13014-3 Wireless LAN Print Server with USB 2.0 interface
315346 / DN-13006-1 Fast Ethernet Print Server, 2-Port USB, 1-Port parallel315308 / DN-13003-1 Fast Ethernet Print Server, USB 2.0
Print Server
DIGITUS
®
Fast Ethernet Print Server, USB 2.0
Turns a workplace printer simply into a network printer for
shared use
• Compatible with IEEE 802.3, IEEE 802.3u Ethernet Standards
• Offers a USB 2.0 port to connect printer
• Supports TCP/IP, IPX/SPX, NetBEUI and AppleTalk network protocols
• Supports LPR, IPP, SMB/TCP, Raw Printing and Unix Logical print protocols
• Supports Peer-to-Peer printing (TCP/IP/IPX/NetBEUI/AppleTalk)
• Supports server based printing (Novell NetWare and Windows)
• Compatible with all common operating systems: Windows Systems/NetWare 3.x and new/Unix/Linux
• Supports DHCP server and client protocols
• Supports web based management, the Windows Configuration Utility and the SNMP protocol
• Offers simple installation and provided setup and diagnosis programmes
• Inclusive power supply
DIGITUS
®
2+1 Port Print Server
Several PCs may print at the same time via our printer server
The DIGITUS
®
2+1 Port Print Server converts your work place printer into a network printer for shared use.
The bi-directional parallel interface (IEEE 1284) for Port 1 (PID1) and the two USB 2.0 High Speed Ports
for Port 2, 3 (PID2, 3) provide you with a fast Ethernet network. The product works with all operating
systems.
• 1x bi-directional parallel interface (IEEE 1284) for Port 1 (PID1)
• 2x USB 2.0 High Speed Ports for Port 2, 3 (PID2, 3)
• Fast Ethernet Network Port: RJ-45 for 10Base-T or 100Base-TX
• Supports Windows 7/Vista/XP/Mac OS/ Linux (OS Ubuntu)
DIGITUS
®
Wireless LAN Print Server, USB 2.0
Offers wireless operations for your printer
Without a problem you may connect your printer with your PC via “Wireless LAN Printserver”. This product
does not only support the commonly known network and print protocols but also “Peer-to-Peer” and server
based printing. It is compatible with all common operating systems – Windows, Mac or Linux. It also
supports a web based management: the Windows configuration utility and the SNMP protocol. And due to
its simple installation - immediate use should be no problem!
• Connects a printer - wireless or via cable - via USB port with all PCs connected to the network
• Corresponds with the standards Ethernet IEEE 802.3, IEEE 802.3u and IEEE 802.11b/g/n
for W-LAN standards
• Various security features such as WPA2/WPA/WEP encryption
• Supports 10/100Mbps in the Ethernet network and up to 150 Mbps in the Wireless LAN
• 1x USB 2.0 Type A socket to connect a printer, 1 x RJ45 socket to connect to the network
• Supports TCP/IP, IPX/SPX, NetBEUI and AppleTalk Network protocols and also LPR, IPP, SMB/TCP, Raw
Printing and Unix Logical Print Protocols
• Compatible with Windows XP/Vista/7, NetWare (3.x and higher), MAC OS and Unix/Linux
• Supports DHCP server and client protocols
• Web based user interface for simple configuration
• Simple to use Windows installation and setup programme
• Supports (optionally error-tolerant) firmware upgrades
DIGITUS
®
3-Port Fast Ethernet Print Server
Enables network access of several PCs to one printer
• Compatible with IEEE 802.3, IEEE 802.3u Ethernet standards
• Offers 2x USB 2.0 ports and 1x parallel port to connect printers
• Supports TCP/IP, IPX/SPX, NetBEUI, Rendezvous, AppleTalk and IPv6 network protocols
• Supports LPR, IPP, SMB/TCP, Raw Printing and Unix Logical Print protocols
• Supports Peer-to-Peer printing (TCP/IP/IPX/NetBEUI/AppleTalk)
• Supports server based printing (Novell NetWare and Windows)
• Compatible with all common operating systems: Windows 98/ME/NT/2000/XP/Vista/
NetWare 3.x and new/Unix/Linux
• Supports DHCP Server and Client protocols
• Supports web based management and Windows Configuration Utility
• Offers simple installation and provided setup and diagnosis programmes
• Delivery including power supply unit