2. Office
  3. Office furniture
  4. Computer desks
  5. Anova
  6. RLA72R

Anova RLA72R, RLA72T Assembly Instruction

  • Hello! I've reviewed the assembly instructions for the ANOVA Vibe tables, specifically the RLA72T and RLA72R models. I understand it outlines the necessary tools, component parts, and step-by-step instructions for assembling these tables. I'm ready to assist you with any questions you might have about the assembly process or the product itself.
  • What tools are needed for assembly?
    How many people are needed for assembly?
    What type of screws are used?
    How many screws are included?
Contact Us:
800.231.1327
[email protected]
TOOLS NEEDED:
• 5/32" Hex Key/Allen Wrench
Assembly Instructions
Vibe Tables
RLA72T - Vibe 72" Rectangular Thermory Table
RLA72R - Vibe 72" Rectangular Recycled Plastic Table
ASSEMBLY HARDWARE: All hardware is stainless steel.
(1) Table Top
(Umbrella Hole Optional)
(2) Table Legs
(16) 18-8 Stainless Steel
Hex Drive Flat Head Screw
ASSEMBLY: The assembly is a two-person operation.
Inspect the shipping container contents for damage and determine that all components and hardware are present.1.
2. Lay all parts on a so work surface or on the shipping packaging to prevent damage to nish.
NOTE: Before assembling the nuts to the bolts, it is recommended that a light oil or petroleum jelly be applied to the
screw threads.
1
COMPONENT PARTS:
2
07/12/2022 Copyright 2022 Anova® Manufactured in the U.S.
Note: Please contact Customer Care at 1-866-797-1761 when ordering replacement parts.
Table Leg
Flat Head Screws
Table Leg
4.
5.
Place table leg into table top slots and align screw holes.
Repeat step 4 and 5 for remaining table leg and screws.
3. Locate table top, locate two table legs and (16) at head
screws.
Insert the at head screws in the holes and tighten using a
5/32" allen wrench.
6.
/