2. Troy-Bilt
  3. 25B554E066

Troy-Bilt 25B554E066, 25B554E011, 25B554F266 Fast Start Guide

  • Hello! I am an AI chatbot trained to assist you with the Troy-Bilt 25B554E066 Fast Start Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Lea el manual de operación anexo sobre ensamblaje e inicio.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
778-11728
25B-554E ©2008
1
2
Tighten rope
guide wing nut.
4
3
Starter
Rope
Blade
Control
Handle
Unfold handle
into operating
position.
Secure handle
by tightening
star knobs.
(1) Hold blade
control handle
against upper
handle.
(2) Slowly pull
starter rope from
engine.
(3) Slip starter
rope into rope
guide.
Star Knobs
1
2
3
Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Lea el manual de operación anexo sobre ensamblaje e inicio.
Need Help?
Call 1-888-TO-HELP-U
8
Pull starter rope with quick, full arm stroke.
If engine does not start after three pulls, repeat steps 7
through 9.
9
(1) Set depth
blade to highest
position.
(2) Depress blade
control handle
and hold.
2
1
5
6
Push primer ve times.
7
Oil Fill
Gas Cap
Primer
Fill tank with fresh gas up
to within 1½ inches
below top of fuel tank neck.
Do not overll.
Fill engine with entire
contents of oil bottle
supplied. Do not
overll.
/