Toro Exit-Side Lockout Kit, 2024 or 4045 Directional Drill User manual

Toro
Brand
Toro
Model
Exit-Side Lockout Kit, 2024 or 4045 Directional Drill
Type
User manual

Toro Exit-Side Lockout Kit, 2024 or 4045 Directional Drill

The Toro Exit-Side Lockout Kit is a device designed to remotely stop and lock out the user controls of a directional drill. It consists of a receiver mounted on the machine and a handheld transmitter. The person using the transmitter can stop the drill's rotation and thrust, primarily to prevent accidents when someone needs to approach the drill pipe or head.

Toro Exit-Side Lockout Kit, 2024 or 4045 Directional Drill

The Toro Exit-Side Lockout Kit is a device designed to remotely stop and lock out the user controls of a directional drill. It consists of a receiver mounted on the machine and a handheld transmitter. The person using the transmitter can stop the drill's rotation and thrust, primarily to prevent accidents when someone needs to approach the drill pipe or head.

FormNo.3379-768RevA
Exit-SideLockoutKit
2024or4045DirectionalDrill
ModelNo.130-4452
Operator'sManual
Introduction
Theexit-sidelockouttransmitterandreceiveris
designedtoremotelystopandlockouttheusercontrols
ofadirectionaldrill.
Readthisinformationcarefullytolearnhowtooperateand
maintainyourmachineproperlyandtoavoidinjuryand
equipmentdamage.Youareresponsibleforoperatingthe
machineproperlyandsafely.
YoumaycontactTorodirectlyatwww.Toro.comforproduct
andaccessoryinformation,helpndingadealer,ortoregister
yourproduct.
Thismanualidentiespotentialhazardsandhassafety
messagesidentiedbythesafetyalertsymbol(
Figure1),
whichsignalsahazardthatmaycauseseriousinjuryordeath
ifyoudonotfollowtherecommendedprecautions.
Figure1
1.Safetyalertsymbol
Thismanualuses2wordstohighlightinformation.
Importantcallsattentiontospecialmechanicalinformation
andNoteemphasizesgeneralinformationworthyofspecial
attention.
ThisproductcomplieswithallrelevantEuropeandirectives.
Fordetails,seetheseparateproduct-specicDeclarationof
Conformity(DOC)sheet.
Thisproductmaycontainmaterialthatmaybehazardousto
humanhealthandtheenvironment.IncompliancewithEU
Directive2002/96/EConWasteElectricalandElectronic
Equipment(WEEE):
•Donotdisposeoftheproductasunsortedmunicipal
waste.
•Thisproductshouldberecycledinaccordancewith
localregulations.Contactlocalauthoritiesfordetailed
information.
•Thisproductmaybereturnabletothedistributorfor
recycling.Contactyourdistributor/dealerfordetails.
FCCStatements
15.19–TwoPartWarning
ThisdevicecomplieswithPart15oftheFCCrules.Operation
issubjecttothefollowingtwoconditions:
(1)Thisdevicemaynotcauseharmfulinterferenceand
(2)Thisdevicemustacceptanyinterferencereceived,including
interferencethatmaycauseundesiredoperation.
15.21–UnauthorizedModication
NOTICE:Themanufacturerisnotresponsibleforany
unauthorizedmodicationstothisequipmentmadebytheuser.
Suchmodicationscouldvoidtheuser’sauthoritytooperate
theequipment.
15.105(b)–Note:
Thisequipmenthasbeentestedandfoundtocomplywith
thelimitsforaClassBdigitaldevice,pursuanttoPart15
oftheFCCRules.Theselimitsaredesignedtoprovide
reasonableprotectionagainstharmfulinterferenceina
residentialinstallation.Thisequipmentgenerates,usesand
canradiateradiofrequencyenergyand,ifnotinstalledand
usedinaccordancewiththeinstructions,maycauseharmful
interferencetoradiocommunications.However,thereis
noguaranteethatinterferencewillnotoccurinaparticular
installation.Ifthisequipmentdoescauseharmfulinterferenceto
radioortelevisionreception,whichcanbedeterminedbyturning
theequipmentoffandon,theuserisencouragedtotrytocorrect
theinterferencebyoneormoreofthefollowingmeasures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentandreceiver.
•Connecttheequipmentintoanoutletonacircuitdifferentfrom
thattowhichthereceiverisconnected.
IndustryCanadaStatement
ThisdevicecomplieswithCanadianRSS-210.
Theinstallerofthisradioequipmentmustensurethatthe
antennaislocatedorpointedsuchthatitdoesnotemitRFeld
inexcessofHealthCanadalimitsforthegeneralpopulation;
consultSafetyCode6,obtainablefromHealthCanada’s
websitewww.hc-sc.gc-ca/rpb.
©2013—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3379-768*A
Safety
Improperlyusingormaintainingthisequipmentcan
resultininjury.Toreducethepotentialforinjury,
complywiththesesafetyinstructions.Torotestedthis
equipmentforreasonablysafeservice;however,failureto
complywiththefollowinginstructionsmayresultinpersonal
injury.
Toensuremaximumsafety,bestperformance,and
togainknowledgeoftheproduct,itisessentialthat
youandanyotheroperatorreadandunderstandthe
contentsofthismanualbeforeusingthisproduct.Pay
particularattentiontothesafetyalertsymbol(
Figure1),
whichmeansCaution,Warning,orDanger—“personal
safetyinstruction.”Readandunderstandtheinstruction
becauseithastodowithsafety.Failuretocomplywith
theinstructionmayresultinpersonalinjury.
•Failuretoabidebytheseprecautionsmayresultin
equipmentfailureandpersonalinjury.
•Useandmaintainproperwiring.Improper,loose,and
frayedwiringcancausesystemfailure,equipmentdamage,
andintermittentoperation.
•Changesormodicationsmadetoequipmentnot
expresslyapprovedbythemanufacturerwillvoidthe
warranty.
•Owner/operatorsoftheequipmentmustabidebyall
applicableFederal,State,andLocallawsconcerning
installationandoperationoftheequipment.
•Makesurethatthemachineryandsurroundingareais
clearbeforeoperating.Donotactivatetheremotecontrol
systemuntilcertainthatitissafetodoso.
•Turnoffthehandheldremoteandremovepowerfrom
thebaseunitbeforeattemptinganymaintenance.This
willpreventaccidentaloperationofthecontrolled
machinery.
•PowerisremovedfromtheBaseUnitbydetachingthe
12-pincablefromthebaseunitconnectorP1,orby
removingthesourcepowerfromthecircuit.
•Useadampclothtokeepunitsclean.Removemud,
concrete,dirt,etc.afterusetopreventobstructingor
cloggingthebuttons,levers,wiring,andswitches.
•Donotallowliquidtoenterthehandheldorbaseunit
enclosures.Donotuseahighpressurewashertoclean
theequipment.
•Disconnecttheradiobaseunitbeforeweldingonthe
machine.Failuretodisconnectthebaseunitmayresultin
destructionofordamagetothebaseunit.
•Operateandstoreunitsonlywithinthespecied
operationandstoragetemperaturesdenedinthis
document.
ProductOverview
Controls
Exit-Side-LockoutSystem
Theexit-side-lockoutsystemprovidestheindividualsworking
aroundthemachinewithameanstodisablethedrillpipe
fromrotatingandthrusting.
Thissystemconsistsofareceivermountedonthemachine
andatransmitter(Figure2)thatmustbeheldbyadesignated
individualworkingaroundthemachine.
ON
OFF
1
2
3
4
5
G022151
Figure2
1.Redindicatorlight
4.Onbutton
2.Yellowindicatorlight
5.Offbutton
3.Greenindicatorlight
TheindividualholdingthetransmittercanpushtheLock
Drill(Off)buttontostopthedrillrotationandthrust.This
isprimarilyusedtostop/lockoutthedrilloperationsinthe
followingsituations:
•Wheninstallingorremovingadrillheadorreamer
•Wheneversomeoneneedstoapproachthedrillpipeor
headanywhereinfrontofthemachine
•Placingawiperonthedrillpipe
•Whenthelocationreceiveroperatoridentiesaproblem
requiringimmediateshutdownofdrilling
Whenitissafetoresumedrilling,theindividualholdingthe
transmittercanpresstheUnlockDrill(On)button.This
buttonsendsasignaltothereceiverthatallowsthemachine
operatortoresetthesystemandrestorethethrustandrotary
functions.
2
Specications
HandheldUnit
Batteries3AAA
Autoshutdown
After2hoursofinactivity
Lowbatterywarning3.3Vandbelow
Lowbatteryshutdown3.1V
Operatingtemperature-20to55degreesC(-4to131
degreesF)
Storagetemperature-40to55degreesC(-40to
131degreesF)
Radiofrequency
2405to2480MHz
RadioRFpower
2mW(2.4GHz)
RadiolicenseNotrequired
Modulation
DSSS
AntennaInternal
BaseUnit
Radiofrequency
2405to2480MHz
RadioRFpower
2mW(2.4GHz)
RadiolicenseNotrequired
Modulation
DSSS
AntennaInternal
Operatingtemperature-20to55degreesC(-4to131
degreesF)
Storagetemperature-40to55degreesC(-40to
131degreesF)
Operation
HandheldIndicatorLights
Thefollowingtableliststhevariousstatesoftheindicator
lightsonthehandheldtransmitter(Figure2)andtheir
meanings:
IndicatorLightState
Meaning
Greenlightisblinkingrapidly
Thetransmitteristransmitting
tothebaseunit
Greenlightisilluminated
withoutblinking
Abuttononthetransmitteris
currentlypressed
YellowlightisblinkingslowlyThebatteriesarelow;change
thebatteries.Ifyoudonot
changethebatteriessoon,the
handheldwillpowerdown.
RedlightisblinkingThetransmitterisactively
receivingmessagesfromthe
baseunit.
ReplacingtheTransmitter
Batteries
1.Loosenthefourscrewssecuringthebatterycover
(Figure3).
Figure3
1.Handheldtransmitter
3.Screws
2.Batterycover
2.Removethecover(Figure4).
Figure4
1.Handheldtransmitter2.Batterycover
3.Removetheexistingbatteries.
4.Install3new,AAAbatteriesintheorientationshown
inFigure5.
Important:Ensurethatyouinstallthebatteries
inthecorrectpolarityorientationoryoucould
damagethetransmitter.
3
Figure5
1.Handheldtransmitter2.AAAbatteries
5.Replacethecoverandsecureitwiththescrewremoved
previously.
Tightenthescrewsenoughtoensurethatthesealing
gasketiscompressed,butdonotovertightenthem.
AssociatingtheHandheld
TransmitterwiththeBaseUnit
Ifthehandheldtransmittereverstopscommunicatingwith
thebaseunit,orifyoureplaceitwithanewtransmitter,you
needtoassociatethetransmittertothebaseunitasfollows:
1.Ensurethatthemachineisturnedoff.
2.Ensurethatthehandheldtransmitterisnotactive(i.e.,
nolightsareon).
3.Standneartherearcontrolpanelofthemachine.
4.SimultaneouslypressandholdtheOnandOffbuttons.
TheGreenlightilluminates.
5.ContinueholdingthebuttonsuntiltheYellowlight
beginsashing,thenreleasethebuttons.
TheRedlightbeginsashingallowingyou2seconds
topressthenextbutton.
6.PressandholdtheOnbutton
TheRedlightturnsoffandtheGreenandYellow
lightsilluminate.
Important:Ifyoudonotpressthisbuttonwithin
2seconds,youwillhavetostartthisprocedure
overagain.
7.ContinueholdingtheOnbuttonandturnonthe
machinetopowerthebaseunit.
Thebaseunitandhandheldestablishacommunication
linkwhileyouholdthebutton.Oncetheprocessis
complete,theYellowlightturnsoff,theRedlight
beginsashing,andtheGreenlightilluminates.All
lightsremainasmentioneduntilyoureleasethebutton.
8.ReleasetheOnbutton.
TheRedlightturnsoffandtheGreenlightashesfor
afewseconds.
DisassociatingallHandheld
TransmittersfromtheBase
Unit
Important:Completingthisprocedurewilldisassociate
alltransmittersfromthebaseunit,whichwillneedtobe
associatedagainbeforetheywillfunction.
1.Ensurethatthemachineisturnedoff.
2.Ensurethatthehandheldtransmitterisnotactive(i.e.,
nolightsareon).
3.Standneartherearcontrolpanelofthemachine.
4.SimultaneouslypressandholdtheOnandOffbuttons.
TheGreenlightilluminates.
5.ContinueholdingthebuttonsuntiltheYellowlight
beginsashing,thenreleasethebuttons.
TheRedlightbeginsashingallowingyou2seconds
topressthenextbutton.
6.PressandholdtheOffbutton
TheRedlightturnsoffandtheGreenandYellow
lightsilluminate.
Important:Ifyoudonotpressthisbuttonwithin
2seconds,youwillhavetostartthisprocedure
overagain.
7.ContinueholdingtheOffbuttonandturnonthe
machinetopowerthebaseunit.
Thebaseunitandhandheldestablishacommunication
linkwhileyouholdthebutton.Oncetheprocessis
complete,theYellowlightturnsoff,theRedlight
beginsashing,andtheGreenlightilluminates.All
lightsremainasmentioneduntilyoureleasethebutton.
8.ReleasetheOffbutton.
TheRedlightturnsoffandtheGreenlightashesfor
afewseconds.
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Toro Exit-Side Lockout Kit, 2024 or 4045 Directional Drill User manual

Toro
Brand
Toro
Model
Exit-Side Lockout Kit, 2024 or 4045 Directional Drill
Type
User manual

Toro Exit-Side Lockout Kit, 2024 or 4045 Directional Drill

The Toro Exit-Side Lockout Kit is a device designed to remotely stop and lock out the user controls of a directional drill. It consists of a receiver mounted on the machine and a handheld transmitter. The person using the transmitter can stop the drill's rotation and thrust, primarily to prevent accidents when someone needs to approach the drill pipe or head.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents