![](//vs1.manuzoid.com/store/data-gzf/d9b3042046877fa59d343cd1d6806042/2/000503218.htmlex.zip/bg7.jpg)
2. OLite rental frame vertical locks
2. OLITE RENTAL FRAME VERTICAL LOCKS
Each tile has 2 vertical locks, a left and a righ t lock. Th e g iven procedures are giv en for a right lock. The left
lock is a m irror of the right lock.
2.1 Removal of vertical locking assembly
How to remove
1. Turn out the 3 screws on the bottom side (A).
D
A
B
C
Image 2-1
Remove vertical locking assembly
2. Turn out both screws on the front side of the v e
rtical locking (B).
3. Turn off bolt C.
4. Set the locking handle upwards.
5. Slide the vertical locking assemb ly forward to remove it.
2.2 Mounting the vertical locking assembly
Before turning in a screw, put a lick of glue on the screw.
How to mount
1. Insert the vertical locking assembly (A) on its place with the handle upwards.
Slide the hammer bolt (B) a little upwards, if it is necessary, so that it matches the hole in the front plate
R5976996 VERTICAL & HORIZONTAL LOCKS 23/05/2006
5