2. BenQ
  3. InstaShow VS Assist
InstaShow VS Assist

BenQ InstaShow VS Assist Installation guide

  • Hello, I've analyzed the user manual for BenQ's VS20 InstaShow Button, along with instructions for setting up the room camera and Video Bar. The document outlines initial setup steps using USB and RJ45 connections, installing the InstaShow Button, connecting with the VS Assist App, and setting up audio for videoconferencing. I'm ready to answer your questions about these devices and their use.
  • How to connect to the room camera?
    How to connect to a corporate network?
    How to check if the correct camera is being used?
    What is the purpose of the InstaShow button?
VS20_332131
*Click the InstaShow Camera Preview to check if the [room camera] is being used
*Your PC will automatically switch the Wi-Fi connection to the VS20 receiver
Installing ( initial setup)
Use the
[room camera]
1
Connect to a corporate network
Step 2
Run the InstaShow
VS Assist App
Step 4
Connect to a [room camera]
Step 1
USB
Video Bar
Plug in an InstaShow
Button
Step 3
Plug
in !
RJ45
VS20_332131
*All devices must be connected to the same LAN
VS20_332131
Installing ( initial setup)
Use the
[room camera]
1
Connect to a corporate network
Step 2
Select the VS20
Host Receiver
Step 4
Connect to a [room camera]
Step 1
USB
Video Bar
Run the InstaShow
VS Assist App
Step 3
RJ45
VS20_332131
You are now using the [room camera]
Installing
Use the [room camera]
in a [VC meeting]
2
Open your [VC APP]
Step 1
Set the camera to
InstaShow Camera
Step 2
Installing
Audio Setting
in [VC APP]
3
App Free
A standalone mic to replace
the computer's built-in mic.
There are 2 options to set up your microphone :
The mic system that turn on
all the microphones
App Required
InstaShow button
microphone :
InstaShow Audio :
InstaShow Camera
Preview
Click the button to check
if the correct camera is being
used
Installing
InstaShow
VS Assist App
4
Click the button to capture
what the presenter is casting
on the local screen
InstaShow Display
Sharing
Local Screen
Your Device
Click !
Presenter
VS20_332131
VS20_332131
Installing
Present via
your Button
5
Win + P
Share InstaShow Display in
[VC APP] for remote attendees
Step 3
You are logged in to [VC APP]
Step 1
Step 2
Use Win + P keyboard shortcut
to extend your screen to external
displays and projectors
Press the InstaShow Button
to cast your screen
Click “InstaShow Display Sharing”
in VS Assist App
You are not logged in to [VC APP]
/