Wincor Nixdorf BEETLE /iSCAN EASY eXpress+ Installation guide

BEETLE/ iSCAN EASY eXpress+

Installation manual

01750341833D

DieboldNixdorf.com

Copyright

All rights, including rights of translation, reproduction by printing, copying or similar methods,

in part or in whole, are reserved.

the grant of a patent or the registration of a utility model. Subject to availability and technical

modifications. All names of hardware and software products mentioned in this manual are

trade names and/or trademarks of their respective manufactures.

Contents

1 About this Manual .................................................................................................... 1

1.1 Symbols ..................................................................................................................... 1

2 Warranty .................................................................................................................... 2

3 Unpacking and Checking the System ..................................................................... 3

3.1 Serial number ............................................................................................................. 3

4 ESD (Electrostatic Sensitive Devices) .................................................................... 6

5 Important Notes ........................................................................................................ 7

5.1 Connecting Peripherals .............................................................................................. 8

6 Tools You Need ........................................................................................................ 9

7 Customer Requirements .........................................................................................10

8 Components ............................................................................................................11

8.1 Exterior view ..............................................................................................................11

8.2 Interior view ...............................................................................................................12

8.3 15” and 19” ................................................................................................................12

8.4 27” .............................................................................................................................13

9 Opening the device .................................................................................................14

10 Ventilating the system ............................................................................................15

11 Hand grips ...............................................................................................................17

12 Installation in the table adapter ..............................................................................18

12.1 Requirements ............................................................................................................18

12.2 Drill pattern dimensions for 15” and 19” for table adapter ..........................................18

12.3 Drill pattern dimensions for 27” table adapter ............................................................19

12.4 Installation 15” and 19” version ..................................................................................20

12.5 Installation 27” version ...............................................................................................23

13 Installation: Hybrid (15” and 19” only) ...................................................................24

13.1 Delivery .....................................................................................................................25

13.2 Dimensions and weight .............................................................................................25

13.3 Display assembly ......................................................................................................26

13.3.1 BA90 .........................................................................................................................26

13.3.2 BA92 und BA93 .........................................................................................................28

13.4 Connection of Barcode Scanners ..............................................................................32

13.5 Barcode scanner initialization ....................................................................................33

13.5.1 Datalogic Magellan 3450VSi ......................................................................................33

13.5.2 Honeywell CF3680 ....................................................................................................34

13.6 Connection of waiter lock...........................................................................................36

14 Installation: Wall Mounted Kiosk ............................................................................37

14.1 Recommendation for wall mounting ...........................................................................37

14.2 Hole pattern for wall mounting (dimensions in mm) ...................................................37

14.2.1 15” and 19” BEETLE /iScan EASY eXpress+ ............................................................37

14.2.2 27” BEETLE /iScan EASY eXpress+ .........................................................................39

14.3 Recommended materials ...........................................................................................40

14.4 Installing the wall mount for 15” and 19” version ........................................................41

14.5 Inserting the system ..................................................................................................43

15 Pillar mounting ........................................................................................................44

15.1 Dimensions (in mm) ...................................................................................................44

15.1.1 Optional base plate 15” and 19”.................................................................................44

15.1.2 Optional base plate 27” .............................................................................................45

15.1.3 Pillar drill template .....................................................................................................46

15.1.4 Example: Pillar mounting with 15” ..............................................................................47

15.1.5 Example: Pillar mounting of 19” with optional basket shelf on both sides, status

indicator, coupon box and base plate ...................................................................................47

15.1.6 Example: Pillar mounting of 19” and optional scale platform ......................................48

15.2 Installation instructions: Self-Checkout on pillar .........................................................49

15.2.1 Self-Checkout with floor cabling ................................................................................49

15.2.2 Self-Checkout with floor cabling and optional base plate ...........................................54

15.2.3 Self-Checkout with cabling “on the floor” ...................................................................55

15.2.4 Installing the basket shelf at the front side .................................................................55

15.2.5 Installing the basket shelf at side ...............................................................................57

15.2.6 Installing the security scale at front ............................................................................57

15.2.7 Installing the security scale at side ............................................................................60

15.2.8 Installing the coupon box ...........................................................................................61

15.2.9 Installation sensormatic controller ..............................................................................64

15.2.10 Installing the signal indicator ................................................................................68

16 Connecting the System ...........................................................................................71

17 Removing the protection foil at the Display and Front surface ...........................74

18 Installation in general ..............................................................................................75

18.1 EFT (Electronic-Funds-Transfer)-Terminal ................................................................75

18.2 EFT ICT 220/250 .......................................................................................................81

19 EFT Worldline Valina ...............................................................................................84

20 EFT Verifone P400 ...................................................................................................90

5. EFT DESK3500 .........................................................................................................97

21 Cleaning Instructions ............................................................................................ 102

21.1 General Information ................................................................................................. 102

21.2 Maintenance and Service ........................................................................................ 102

21.3 Housing ................................................................................................................... 102

21.4 Approved Cleaning Materials ................................................................................... 103

22 Technical data ....................................................................................................... 104

22.1 System .................................................................................................................... 104

22.2 PC ........................................................................................................................... 105

22.3 Display 15” .............................................................................................................. 106

22.4 Display 19” .............................................................................................................. 107

22.5 Display 27” .............................................................................................................. 108

22.6 Printer TH230+ ........................................................................................................ 109

22.7 TH250 ..................................................................................................................... 110

22.8 Epson TM-T88VI ..................................................................................................... 111

22.9 Custom printer ......................................................................................................... 112

22.10 Magellan 3450VSi ................................................................................................... 113

22.11 Scanner Magellan 3200VSi ..................................................................................... 114

22.12 Scanner ZEBRA MS4717 CONE ............................................................................. 115

22.13 Scanner Honeywell CF3680 .................................................................................... 116

22.14 RFID/NFC Modul ..................................................................................................... 116

23 Dimensions (mm) .................................................................................................. 117

23.1 Orientation and vertical mounting ............................................................................ 117

23.2 15“ version .............................................................................................................. 118

23.2.1 Main dimensions ..................................................................................................... 118

23.2.2 Integration dimensions ............................................................................................ 120

23.2.3 Dimensions with table and wall adapter ................................................................... 121

23.3 19“ version .............................................................................................................. 122

23.3.1 Main dimensions ..................................................................................................... 122

23.3.2 Integration dimensions ............................................................................................ 123

23.3.3 Dimensions with table and wall adapter ................................................................... 124

23.4 27“ version .............................................................................................................. 125

23.4.1 Main dimensions ..................................................................................................... 125

23.4.2 Integration dimensions ............................................................................................ 126

23.4.3 Dimensions with table and wall adapter ................................................................... 127

24 Block diagram ........................................................................................................ 128

25 Certifications of the Manufacturer ....................................................................... 130

26 Recycling ............................................................................................................... 131

BEETLE/ iSCAN EASY eXpress+

1

1 About this Manual

This manual refers to technically trained personnel only.

It provides all necessary site preparation information for installing the device at site.

The responsibility for all technical and special prerequisites for the installation of the device is

borne by the customer. A detailed list of customer responsibilities is given in this manual.

Installation as well as connection of BEETLE /iSCAN EASY eXpress

+

may only be executed

by technically trained personnel.

The safety instructions given in this document should be strictly followed when handling the

BEETLE /iSCAN EASY eXpress

+

. Further safety, installation, and maintenance instructions

can be found in the manuals supplied with the components.

In case of doubts or questions please contact Diebold Nixdorf.

1.1 Symbols

DANGER

This warning note describes a hazard with a high degree of risk, which, if not

avoided, will result in death or grave bodily injury.

WARNING

This warning note describes a hazard with a medium degree of risk, which, if

not avoided, will result in death or grave bodily injury.

CAUTION

This warning note describes a hazard with a low degree of risk, which, if not

avoided, will result in death or grave bodily injury.

NOTICE

This note provides application tips and information that help prevent errors

and material damage.

BEETLE/ iSCAN EASY eXpress+

2

2 Warranty

Diebold Nixdorf generally guarantees a warranty engagement for 12 months beginning with

the date of delivery. This warranty engagement covers all damages which occur despite a

normal use of the product.

Damages because of

 improper or insufficient maintenance,

 improper use of the product or unauthorized modifications of the product,

 inadequate location or surroundings

will not be covered by the warranty.

For further information on the stipulation consult your contract.

All parts of the product which are subject to wear and tear are not included in the warranty

engagement. For detailed warranty arrangements please consult your contract documents.

BEETLE/ iSCAN EASY eXpress+

3

3 Unpacking and Checking the System

Take the system out of the package and the card board. Be careful to the signal.

Verify that the scope of delivery is identical to the information on the delivery ticket.

Should you notice any

 transport damages or

 discrepancies between package contents and delivery ticket or

 functional defects,

please inform your contracting parties or the branch office of Diebold Nixdorf immediately.

Please indicate the number of your delivery ticket and delivery ticket position and serial

number of the respective device.

NOTICE

We recommend to save the original packaging for transport at a later time

(protection from impact and shock).

3.1 Serial number

You will find the serial number on the label, which is attached to the right side of the housing

Type plate with serial number

BEETLE/ iSCAN EASY eXpress+

4

BEETLE /iSCAN eXpress+ 15“, 19“

BEETLE /iSCAN eXpress+ 27“

With SENSORMATIC- Article Surveillance System

Made in Germany

德国制造/德國製造

Model

/型号/型號

: iSCAN EASY eXpress+ No:15

PN/编号/編號 : 01750300948

S/N 5300000000

Diebold Nixdorf Systems GmbH

Wohlrabedamm 31

DE-13629 Berlin

Product

/品名 :

Self Checkout Terminal

/自助结账机/自助結帳系統

D31294

RoHS

Made in Germany

德国制造/德國製造

S/N 5300000000

Diebold Nixdorf Systems GmbH

Wohlrabedamm 31

DE-13629 Berlin

Voltage

/电压/電壓

: 100-240V

Current/电流/電流 : 1.4 – 0.7A

Frequency

/频率/頻率

: 60-50Hz

Model

/型号/型號

: iSCAN EASY eXpress+ No:19

Product

/品名 :

Self Checkout Terminal

/自助结账机/自助結帳系統

PN

/编号/編號

: 01750300948

D31294

RoHS

Voltage: 100-240V

Current: 2.4 – 1.0A

Frequency

:

60-50Hz

Made in Germany

Model: iSCAN EASY eXpress+ No:27

PN: 0175xxxxx

S/N 5300000000

Diebold Nixdorf Systems GmbH

Wohlrabedamm 31

DE-13629 Berlin

Product

:

Self Checkout Terminal

BEETLE/ iSCAN EASY eXpress+

5

BEETLE/ iSCAN EASY eXpress+

6

4 ESD (Electrostatic Sensitive Devices)

Electrostatic sensitive devices (ESD)

may be marked with this sticker.

When you handle components fitted with ESDs, you must observe the following points under

all circumstances:

 Unplug the power before inserting or removing components containing ESDs.

 While working with ESDs you must discharge yourself by using an ESD wrist strap or

grounding cable to connect yourself at all times to the earth connector of power socket or

a grounded object.

 Place all components containing ESDs on a static-safe base.

 The equipment and tools you use must be free of static charges.

 Always hold boards with ESDs by their edges. Do not touch the components.

 Never touch pins or conductors on boards fitted with ESDs.

BEETLE/ iSCAN EASY eXpress+

7

5 Important Notes

Appliances supplied by Diebold Nixdorf comply with the respective safety regulations for

data-processing installations and information technology installations, including electrical

office equipment for use within an office environment.

WARNING

Risk of injury! Whenever work of any kind is done on the device, as well as

when data cables are plugged and unplugged, the device must be completely

disconnected from the line voltage.

NOTICE

The appliance should be used only when the front door is closed.

 The sockets of the house installation must be easily accessible.

 Appliances may only be repaired by authorized technicians.

 Unauthorized opening of the housing or inexpert repairs can result not only in

considerable personal danger, but will also invalidate your warranty and liability

protection.

 Always consult the available documentation before doing any work with this

appliance.

 If this device is brought from a cold environment into a heated place of business,

condensation may occur. Before operation, the device must be completely dry.

Therefore, an acclimatization period of at least two hours must be adhered to.

 Always lay the supply leads and cables in such a way that they cannot be stepped on

or tripped over.

 Exchange damaged cables immediately.

 In order to completely disconnect the device from the power supply, use the circuit

breaker in the fuse box or building installation.

 Sensitive data cables must not be marked.

 Make sure that no objects (such as paper clips) can reach the interior of the device,

since electrical shocks or short-circuits could result.

 To avoid overheating of the system ensure that the BEETLE /iSCAN EASY eXpress

+

receives adequate ventilation.

 During an electrical storm, data cables should not be plugged in or unplugged.

 Keep the device away from vibrations, airstreams/ventilations, dust, humidity and

heat.

 Ensure that used parts are disposed of in an environmentally friendly manner.

BEETLE/ iSCAN EASY eXpress+

8

 In case of an accident (such as a damaged housing, entry of liquids or foreign

objects), switch the device off and use the separator to completely remove the device

from power.

 The appliance and other information technology hardware should only be connected

to electrical supply networks with a separate protective earth wire (PE). This type of

electrical supply network is referred to as a TN-S network. Do not use PEN

conductors.

Also follow the recommendations set forth in DIN VDE 0100 Part 540, Appendix C2

as well as EN50174-2, §5.4.3, National Electrical Code ANSI/NFPA 70-2005 and

Canadian Electrical Code, Part I, CSA C22.1-02. This will help prevent malfunctions.

 Turn off the device when working on the cutter of the printer.

 Always keep the ventilation slots free of obstruction to ensure adequate air circulation

and avoid overheating.

 Transport the appliance only in its original packaging (to protect it against knocks and

bumps).

 If a lithium battery is supplied with the appliance, ensure that the battery is replaced

with an equivalent type. Otherwise there is danger of explosion!

Lithium batteries may only be replaced with identical types or other types

recommended by the manufacturer.

 Batteries must be disposed of according to local regulations on the disposal of

special waste.

5.1 Connecting Peripherals

Use only shielded cables when connecting devices to the system to ensure compliance

with international Rules and Regulations for radiated emission as well as to achieve a

high immunity against external disturbances.

BEETLE/ iSCAN EASY eXpress+

9

6 Tools You Need

Keep the following tools at hand for working at the system.

Torx screw driver Size: T6, T8, T10, T20, T25

Socket wrench Wrench size: 5,5mm (M3), 7mm (M4), 8mm (M5)

BEETLE/ iSCAN EASY eXpress+

10

7 Customer Requirements

Before the BEETLE /iSCAN EASY eXpress

+

installation can be started, the customer is held

responsible to provide the following:

NOTICE

Run the kiosk system in attended areas only!

• Installation of EFT (Diebold Nixdorf just provides the power connection).

• The device must not be installed near heat sources.

• If the device will be fixed directley to the floor appropriate materials are requiered.

• Appropriate drawings concerning location of the equipment as well as site wiring

(power and communications, paths and lengths). Location of other equipment that

may generate electrical noise, electromagnetic interference, or heat.

• Providing of dowels and screws for installation of the base plate at the desk.

• Provision and installation of all communication cables wall jacks, special connectors

and associated hardware.

• Provision and installation of necessary power distribution boxes, conduits, grounds,

lightning protection devices, and associated hardware.

• Ensure that all applicable codes, regulations, and laws (including, but not limited to,

electrical, building, safety, and health) are adhered to.

• Provision and installation of auxiliary power or other equipment as required.

• Provision of storage or service as required.

• Provision of a level floor to locate the device. The system has to be stable and must

not tilt. The maximum incline must not exceed 2%. The feet of the unit can overcome

a height difference of up to 10mm.

• Provision and installation of floor coverings and environmental systems that limit or

control static electricity build-up and discharge.

• Provision of appropriate equipment for the remote support.

The customer is responsible for relocating the Kiosk equipment (check stand and

components) to the final placement/installation position.

Keep the Diebold Nixdorf equipment area free from dust, smoke, lint, and other particles.

Restrict smoking, eating, and drinking around the equipment. Avoid locating the equipment

near other machines that generate ink, carbon and paper dust particles.

NOTICE

Please note that Diebold Nixdorf will not take over any warranty/liability in

case the technical and environmental requirements are not met.

BEETLE/ iSCAN EASY eXpress+

11

8 Components

8.1 Exterior view

1 Pole Light 6 Printer

2 Display 15“, 19“ 7

EFT-holder with EFT*

(example only)

3

Swipe Card Reader or Waiter lock with

15“, 27” display

8

Waiter Lock (integrated,

optional)

4 Lock 9 Article Surveillance System

5 Scanner

* It may be connected ETFs with 12V for max. current consumption of 1.1A (permanent).

4

5

2

3

6

7

8

1

9

BEETLE/ iSCAN EASY eXpress+

12

8.2 Interior view

8.3 15” and 19”

1 Pole Light (optional) 8 PC

2

Swipe Card Reader or Waiter Lock

(only with 15“ Display)

9 Power Supply

3 Display 15“ orl 19“ 10 Lock

4 EFT*-holder 11 Fan

5 Scanner 12 Printer

6

Article Surveillance System (only with

Magellan 3xxx Vsi)

13 NFC (optional)

7 Waiter Lock integrated (optional) 14 Loud Speaker (optional)

* It may be connected ETFs with 12V for max. current consumption of 1.1A (permanent).

4

1

5

2

3

7

6

8

9

12

13

10

11

14

BEETLE/ iSCAN EASY eXpress+

13

8.4 27”

1 Pole Light (optional) 8 PC

2 Swipe Card Reader or Waiter Lock (optional) 9 Power Supply

3 Display 27“ 10 Lock

4 EFT*-holder 11 Fan

5 Scanner 12 Printer

6

Article Surveillance System (only with

Magellan 3xxx Vsi)

13 NFC (optional)

7 Waiter Lock integrated (optional) 14 Loud Speaker (optional)

* It may be connected ETFs with 12V for max. current consumption of 1.1A (permanent).

4

1

5

2

3

7

6

8

9

12

13

10

11

14

BEETLE/ iSCAN EASY eXpress+

14

9 Opening the device

Unlock the system with the key (siehe arrow).

Open the door to the left.

BEETLE/ iSCAN EASY eXpress+

15

10 Ventilating the system

Keep the device's ventilation openings uncovered to ensure adequate ventilation. This

prevents the temperature increasing excessively.

Even if you plan to integrate the device, make sure to maintain the minimum distances stated

below and ensure reliable ventilation and air extraction.

The direct ambient temperature of the system must not exceed 35 °C.

Page is loading ...

Wincor Nixdorf BEETLE /iSCAN EASY eXpress+ Installation guide

Wincor Nixdorf BEETLE /iSCAN EASY eXpress+ Installation guide

Related papers

Other documents