2. Ops-Core
  3. O2 Mask Single-Strap Kit

Ops-Core O2 Mask Single-Strap Kit Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Ops-Core O2 Mask Single-Strap Kit Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Fits Carleton PHANTOM &
Para-Flite PHAOS O2 Masks
™
™
O2 SINGLE STRAP KIT
Part # 26-99-301
Part # 26-99-302
Part # 26-99-303
TAN
BLACK
GREEN
FOR FAST & ACH HELMETS
•
Requires Ops-Core FAST / ACH Side Rails (ARCs)
•
O2 Mask Sold Separately
06-05-500 REV. A
Plastic Housing
Release Buckle
O2
Connector
Rubber Mask
Plastic Housing
Rubber MaskRelease Buckle
O2 Connector
INSTALLATION INSTRUCTIONS
PACKAGE CONTENTS
=
(1) Left Side O2 Single Strap, (1) Right Side O2 Single Strap
Install the O2 Mask Straps using your O2 mask’s existing hardware so that the Front-Pull
Release Buckle is positioned on the side opposite of the O2 Connector.
STRAP INSTALLATION
Insert O2 Buckle into the Corner
Buckle Receiver on the FAST / ACH
Side Rails (ARCs) as shown.
Slide the Head-Loc® Tabs toward
or away from your face to tighten
or loosen the straps respectively.
Strap Buckle
Corner Buckle
Receiver
O2 Connector
Head-Loc
Tab
STRAP
ADJUSTMENT
02 Single Strap
For Carleton PHANTOM
™
Install the strap ends on the outside of the plastic housing
as shown.
For Para-Flite PHAOS
™
Install the strap ends in between the plastic housing
and rubber face mask as shown.
OPS-CORE, INC.
Marine Industrial Park
12 Channel Street
Boston, MA 02210
Tel: 617.670.3547
Fax: 617.670.3581
Or visit our website
at www.ops-core.com
/