Ops-Core O2 Mask Double-Strap Kit Operating instructions

Type
Operating instructions
MADE IN USA
Fits Carleton PHANTOM &
Para-Flite PHAOS O2 Masks
Featuring:
O2 Mask Sold Separately
FOR FAST HELMETS
Part # 26-99-101
Part # 26-99-102
Part # 26-99-103
O2 DOUBLE STRAP KIT
TAN
BLACK
GREEN
06-05-800 REV. A
INSTALLATION INSTRUCTIONS
PACKAGE CONTENTS
=
(1) Left Side FAST O2 Double Strap, (1) Right Side FAST O2 Double Strap
OPS-CORE, INC.
Marine Industrial Park
12 Channel Street
Boston, MA 02210
Tel: 617.670.3547
Fax: 617.670.3581
Or visit our website
at www.ops-core.com
Install the O2 Mask Straps using your O2 mask’s existing hardware so that the Front-Pull
Release Buckle is positioned on the side opposite of the O2 Connector.
STRAP INSTALLATION
STEP 1
Insert Swivel Clip brackets into
FAST Side Rails (ARCs) as shown.
STEP 2
Attach O2 Mask Strap mounted
Swivel Clip.
Slide the Head-Loc® Tabs toward
or away from your face to tighten
or loosen the straps respectively.
STRAP
ADJUSTMENT
Head-Loc
Tabs
O2 Connector
1
2
1
2
Rear Strap
Front Strap
Bracket
Swivel ClipBracket
Swivel Clip
For Carleton PHANTOM
Install the strap ends on the outside of the plastic housing
as shown.
For Para-Flite PHAOS
Install the strap ends in between the plastic housing
and rubber face mask as shown.
Plastic Housing
Release Buckle
O2
Connector
Rubber Mask
Plastic Housing
Rubber MaskRelease Buckle
O2 Connector
  • Page 1 1
  • Page 2 2

Ops-Core O2 Mask Double-Strap Kit Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI