Tyan S7040 User manual

S7040

Version 1.0

Copyright

this manual may be reproduced or translated without prior written consent from

MiTAC Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in

this manual are property of their respective owners including, but not limited to

the following.

TYAN

®

is a trademark of MiTAC Computer Corporation

Intel

®

is a trademark of Intel

®

Corporation.

AMI

®

, AMIBIOS

®

and combinations thereof are trademarks of AMI Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

Aspeed

®

is a trademark of Aspeed Technology Inc.

Notice

Information contained in this document is furnished by MiTAC Computer

Corporation and has been reviewed for accuracy and reliability prior to printing.

MiTAC assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN

®

products including liability or

warranties relating to fitness for a particular purpose or merchantability. MiTAC

retains the right to make changes to product descriptions and/or specifications

at any time, without notice. In no event will MiTAC be held liable for any direct

or indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.TYAN.com

2

About this guide

This user guide contains the information you need when installing and configuring

the motherboard.

How this guide is organized

This guide contains the following parts:

Chapter1: Instruction

This chapter describes the features of the motherboard and the new technology it

supports.

Chapter2: Board Installation

This chapter lists the hardware setup procedures that you need to abide by when

installing system components. It includes description of the jumpers and connectors

on the motherboard.

Chapter3: BIOS Setup

This chapter tells how to change system settings through the BIOS setup menu.

Detailed descriptions of the BIOS parameters are also provided.

Chapter4: Diagnostics

This chapter introduces some BIOS codes and technical terms to provide better

service for the customers.

Appendix: Fan and Temp Sensors

This section aims to help readers identify the locations of some specific Fan and

Temp Sensors on the motherboard. A table of BIOS Temp sensor name

explanation is also included for reader’s reference.

http://www.TYAN.com

3

Contents

Before you begin…................................................................................................4

Chapter 1: Instruction ..........................................................................5

1.1 - Congratulations .............................................................................................5

1.2 - Hardware Specifications................................................................................5

1.3 - Software Specifications...............................................................................16

1.4 - AST2300 User Guide ..................................................................................16

Chapter 2: Board Installation ............................................................17

2.1 - Board Image................................................................................................18

2.2 - Block Diagram.............................................................................................19

2.3 - Board Parts, Jumpers and Connectors........................................................20

2.4 - Installing the Processor...............................................................................34

2.5 - Installing the Heatsink .................................................................................37

2.6 - Thermal Interface Material...........................................................................38

2.7 - Tips on Installing Motherboard in Chassis...................................................39

2.8 - Installing the Memory ..................................................................................41

2.9 - Attaching Drive Cables................................................................................45

2.10 - Installing Add-In Cards..............................................................................46

2.11 - Connecting External Devices ....................................................................47

2.12 - Installing the Power Supply.......................................................................48

2.13 - Finishing Up ..............................................................................................48

Chapter 3: BIOS Setup.......................................................................49

3.1 - About the BIOS............................................................................................49

3.2 - Setup Basics ...............................................................................................49

3.3 - Getting Help ................................................................................................50

3.4 - In Case of Problems....................................................................................50

3.5 - BIOS Main Menu.........................................................................................51

3.6 - BIOS Advanced Menu.................................................................................53

3.7 - Chipset Menu ..............................................................................................82

3.8 - Server Management....................................................................................96

3.9 - Boot Configuration.....................................................................................100

3.10 - Security Menu..........................................................................................102

3.11 - Save & Exit Menu....................................................................................103

Chapter 4: Diagnostics .................................................................... 105

4.1 Flash Utility................................................................................................105

4.2 AMIBIOS Post Code (Aptio) ......................................................................105

Appendix: Fan and Temp Sensors .................................................113

Glossary............................................................................................117

Technical Support............................................................................ 123

http://www.TYAN.com

4

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

Item Name P/N Number Description

5411T4430006

TF-MB;SBU, S7040,

S7040G2NR/MB, R1.0, TYAN

5411T4430007

TF-MB;SBU, S7040,

S7040WGM2NR/MB, R1.0, TYAN

5411T4430008

TF-MB;SBU, S7040,

S7040WGM4NR/MB, R1.0, TYAN

5411T4430009

TF-MB; SBU, S7040,

S7040GM4NR/MB, R1.0, TYAN

5411T4430010

TF-MB; SBU, S7040,

S7040GM2NR/MB, R1.0, TYAN

1x S7040

Motherboard

5411T4430011

TF-MB; SBU, S7040,

S7040WGM2NR5/MB, R1.0, TYAN

6x Serial

ATA Cable

422736300010

TF-CABLE ASSY; SBU, SATA-

500MM

1x I/O Shield

341T44000001

TF-I/O SHIELDING; SBU, SUS,

50012-6AP

1x S7040

User’s

Manual

5615T4430001

TF-MANUAL; SBU, V1.0, USER

MANUAL, D2151-100, S7040

1x S7040 Quick

Reference

Guide

5618T4430002

TF-SINGLE PAGE; SBU, V1.0,Quick

Reference, D2152-100, S7040

1x TYAN

®

Driver CD

5651T4390001

TF-SOFTWARE; SBU, TYAN Driver

CD for Intel C600 series Platform

V1.1

IMPORTANT NOTE:

Sales samples may not come with any of the accessories listed above.

If you have ordered a sales sample and you are missing any of the above items,

please contact your sales representative to help order accessories.

http://www.TYAN.com

5

Chapter 1: Instruction

1.1 - Congratulations

You have purchased the powerful TYAN

®

S7040 motherboard, based on the Intel

®

Patsburg chipset. The S7040 is designed to support dual Intel

®

Xeon E5-2400

Series processors, and up to 288GB of LRDIMM / 144GB of RDIMM / 72GB of

UDIMM DDR3 memory. Leveraging advanced technology from Intel

®

, the S7040 is

capable of offering scalable 32 and 64-bit computing, high-bandwidth memory

design, and lightning-fast PCI-E bus implementation.

The S7040 not only empowers you in today’s demanding IT environment but also

offers a smooth path for future application upgradeability. All of these rich feature

sets provides the S7040 with the power and flexibility to meet demanding

requirements for today’s IT environments.

Remember to visit the TYAN

®

website at http://www.tyan.com. There you can

find all the information on all TYAN

®

products as well as all the supporting

documentation, FAQs, Drivers and BIOS upgrades.

1.2 - Hardware Specifications

TYAN S7040 (S7040WGM2NR)

Supported CPU

Series

Intel Xeon Processor E5-2400 Series

Socket Type / Q'ty LGA1356 / (2)

Thermal Design

Power (TDP) wattage

Max up to 95W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel C602 with upgrade ROM module

Supported DIMM Qty (6)+(3) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 1066 / 1333 / 1600 RDIMM, 1066 /

1333 UDIMM / LRDIMM

Capacity

up to 288GB LRDIMM / 144GB RDIMM / 72GB

UDIMM

Memory channel

3 Channels per CPU / Support 2 R/LR-DIMMs or 2

UDIMMs per channel (CPU 0) / Support 1 R/LR-

DIMMs or 1 UDIMMs per channel (CPU 1)

Memory

Memory voltage 1.5V or 1.35V

PCI-E

(1) PCI-E x8 slot (x8 link, slot #5) / (1) PCI-E x8 slot

( x4 link, slot #3) / (1) PCI-E x16 slot ( x8 link, slot #4)

Expansion

Slots

PCI (1) PCI 32-bit slot (slot #2)

http://www.TYAN.com

6

Port Q'ty (2) GbE ports

LAN

Controller Intel 82574L

Connector (8) SAS

Controller Intel C602 with TRK-5 upgrade ROM module

Speed 3.0 Gb/s

SAS

RAID RAID 0/1/10 (Intel Integrated RAID upgrade ROM 5)

Connector (6) SATA

Controller Intel C602

Speed (2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color)

Storage

SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Graphic

Chipset Aspeed AST2300

Chipset Infineon SLB9635 (Optional)

TPM

Version TPM v1.2

USB

(9) USB2.0 ports (4 at rear, 4 via cable, 1 type A

onboard)

COM (1) DB-9 COM Connector / (1) 2*5 PIN COM header

SAS (8) SAS connectors

VGA (1) D-Sub 15-pin VGA port

RJ-45 (2) GbE ports

Power SSI 24-pin + 8-pin + 8-pin power connectors

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (4) SATA-II and (2) SATA-III connectors

System

Monitoring

Temperature Monitors temperature for CPU & system environment

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management controller

(BMC) / Supports storage over IP and remote

platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100/1000

Mb/s MAC interface

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power on

mode after power recovery / User-configurable H/W

monitoring / Auto-configurable of hard disk types

Form Factor SSI CEB

Physical

Dimension

Board Dimension 12"x10.5" (305x267mm)

Operating

System

OS supported list Please visit our Web site for the latest update.

FCC (DoC) Class B

Regulation

CE (DoC) Yes

http://www.TYAN.com

7

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Operating

Environment

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

RoHS RoHS 6/6 Compliant Yes

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package

Contains

Cable SATA (6) SATA signal cables

TYAN S7040 (S7040GM4NR)

Supported CPU

Series

Intel Xeon Processor E5-2400 Series

Socket Type / Q'ty LGA1356 / (2)

Thermal Design

Power (TDP) wattage

Max up to 95W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel C602

Supported DIMM Qty (6)+(3) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 1066 / 1333 / 1600 RDIMM, 1066 /

1333 UDIMM / LRDIMM

Capacity

up to 288GB LRDIMM / 144GB RDIMM / 72GB

UDIMM

Memory channel

3 Channels per CPU / Support 2 R/LR-DIMMs or 2

UDIMMs per channel (CPU 0) / Support 1 R/LR-

DIMMs or 1 UDIMMs per channel (CPU 1)

Memory

Memory voltage 1.5V or 1.35V

PCI-E

(1) PCI-E x8 slot (x8 link, slot #5) / (1) PCI-E x8 slot

(x4 link, slot #3) / (1) PCI-E x16 slot (x8 link, slot #4)

Expansion

Slots

PCI (1) PCI 32-bit slot (slot #2)

Port Q'ty (4) GbE ports

LAN

Controller Intel 82574L / Intel I350-AM2

Connector (10) SATA; (2) 6G + (8) 3G

Controller Intel C602

Speed (2) 6.0 Gb/s (blue color), (8) 3.0 Gb/s (black color)

Storage SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Graphic

Chipset Aspeed AST2300

Chipset Infineon SLB9635 (Optional)

TPM

Version TPM v1.2

http://www.TYAN.com

8

USB

(9) USB2.0 ports (4 at rear, 4 via cable, 1 type A

onboard)

COM (1) DB-9 COM Connector / (1) 2*5 PIN COM header

VGA (1) D-Sub 15-pin VGA port

RJ-45 (4) GbE ports

Power SSI 24-pin + 8-pin + 8-pin power connectors

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (2) SATA-III and (8) SATA-II connectors

Voltage

Monitors voltage for CPU, memory, chipset & power

supply

System

Monitoring

Temperature Monitors temperature for CPU & system environment

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management controller

(BMC) / Supports storage over IP and remote

platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100/1000

Mb/s MAC interface

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power on

mode after power recovery / User-configurable H/W

monitoring / Auto-configurable of hard disk types

Form Factor SSI CEB

Physical

Dimension

Board Dimension 12"x10.5" (305x267mm)

Operating

System

OS supported list Please visit our Web site for the latest update.

FCC (DoC) Class B

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Operating

Environment

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

RoHS RoHS 6/6 Compliant Yes

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package

Contains

Cable SATA (6) SATA signal cables

http://www.TYAN.com

9

TYAN S7040 (S7040G2NR)

Supported CPU

Series

Intel Xeon Processor E5-2400 Series

Socket Type / Q'ty LGA1356 / (2)

Thermal Design

Power (TDP) wattage

Max up to 95W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel C602

Supported DIMM Qty (6)+(3) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 1066 / 1333 / 1600 RDIMM, 1066 /

1333 UDIMM / LRDIMM

Capacity

up to 288GB LRDIMM / 144GB RDIMM / 72GB

UDIMM

Memory channel

3 Channels per CPU / Support 2 R/LR-DIMMs or 2

UDIMMs per channel (CPU 0) / Support 1 R/LR-

DIMMs or 1 UDIMMs per channel (CPU 1)

Memory

Memory voltage 1.5V or 1.35V

PCI-E

(1) PCI-E x8 slot (x8 link, slot #5) / (1) PCI-E x8 slot

( x4 link, slot #3) / (1) PCI-E x16 slot ( x8 link, slot #4)

Expansion

Slots

PCI (1) PCI 32-bit slot (slot #2)

Port Q'ty (2) GbE ports

LAN

Controller Intel 82574L

Connector (10) SATA; (2) 6G + (8) 3G

Controller Intel C602

Speed (2) 6.0 Gb/s (blue color), (8) 3.0 Gb/s (black color)

Storage SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Graphic

Chipset Aspeed AST1300

Chipset Infineon SLB9635 (Optional)

TPM

Version TPM v1.2

USB

(9) USB2.0 ports (4 at rear, 4 via cable, 1 type A

onboard)

COM (1) DB-9 COM Connector / (1) 2*5 PIN COM header

VGA (1) D-Sub 15-pin VGA port

RJ-45 (2) GbE ports

Power SSI 24-pin + 8-pin + 8-pin power connectors

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (2) SATA-III and (8) SATA-II connectors

Voltage

Monitors voltage for CPU, memory, chipset & power

supply

System

Monitoring

Temperature

Monitors temperature for CPU & system environment

http://www.TYAN.com

10

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power on

mode after power recovery / User-configurable H/W

monitoring / Auto-configurable of hard disk types

Form Factor SSI CEB

Physical

Dimension

Board Dimension 12"x10.5" (305x267mm)

Operating

System

OS supported list Please visit our Web site for the latest update.

FCC (DoC) Class B

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Operating

Environment

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

RoHS RoHS 6/6 Compliant Yes

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package

Contains

Cable SATA (6) SATA signal cables

TYAN S7040 (S7040WGM4NR(BTO)

Supported CPU

Series

Intel Xeon Processor E5-2400 Series

Socket Type / Q'ty

LGA1356 / (2)

Thermal Design

Power (TDP) wattage

Max up to 95W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH

Intel C602 with upgrade ROM module

Supported DIMM Qty (6)+(3) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 1066 / 1333 / 1600 RDIMM, 1066 /

1333 UDIMM / LRDIMM

Capacity

up to 288GB LRDIMM / 144GB RDIMM / 72GB

UDIMM

Memory channel

3 Channels per CPU / Support 2 R/LR-DIMMs or 2

UDIMMs per channel (CPU 0) / Support 1 R/LR-

DIMMs or 1 UDIMMs per channel (CPU 1)

Memory

Memory voltage 1.5V or 1.35V

PCI-E

(1) PCI-E x8 slot (x8 link, slot #5) / (1) PCI-E x8 slot

(x4 link, slot #3) / (1) PCI-E x16 slot (x8 link, slot #4)

Expansion

Slots

PCI (1) PCI 32-bit slot (slot #2)

http://www.TYAN.com

11

Port Q'ty (4) GbE ports

LAN

Controller Intel 82574L / Intel I350-AM2

Connector (8) SAS

Controller Intel C602 with TRK-5 upgrade ROM module

Speed 3.0 Gb/s

SAS

RAID RAID 0/1/10 (Intel Integrated RAID upgrade ROM 5)

Connector (6) SATA

Controller Intel C602

Speed (2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color)

Storage

SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Graphic

Chipset Aspeed AST2300

Chipset Infineon SLB9635 (Optional)

TPM

Version TPM v1.2

USB

(9) USB2.0 ports (4 at rear, 4 via cable, 1 type A

onboard)

COM (1) DB-9 COM Connector / (1) 2*5 PIN COM header

SAS (8) SAS connectors

VGA (1) D-Sub 15-pin VGA port

RJ-45 (4) GbE ports

Power SSI 24-pin + 8-pin + 8-pin power connectors

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (4) SATA-II and (2) SATA-III connectors

Voltage

Monitors voltage for CPU, memory, chipset & power

supply

System

Monitoring

Temperature Monitors temperature for CPU & system environment

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management controller

(BMC) / Supports storage over IP and remote

platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100/1000

Mb/s MAC interface

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power on

mode after power recovery / User-configurable H/W

monitoring / Auto-configurable of hard disk types

Form Factor SSI CEB

Physical

Dimension

Board Dimension 12"x10.5" (305x267mm)

Operating

System

OS supported list Please visit our Web site for the latest update.

FCC (DoC) Class B

Regulation

CE (DoC) Yes

http://www.TYAN.com

12

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Operating

Environment

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

RoHS RoHS 6/6 Compliant Yes

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package

Contains

Cable SATA (6) SATA signal cables

TYAN S7040 (S7040WGM2NR5(BTO)

Supported CPU

Series

Intel Xeon Processor E5-2400 Series

Socket Type / Q'ty LGA1356 / (2)

Thermal Design

Power (TDP) wattage

Max up to 95W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel C602 with upgrade ROM module

Supported DIMM Qty (6)+(3) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 1066 / 1333 / 1600 RDIMM, 1066 /

1333 UDIMM / LRDIMM

Capacity

up to 288GB LRDIMM / 144GB RDIMM / 72GB

UDIMM

Memory channel

3 Channels per CPU / Support 2 R/LR-DIMMs or 2

UDIMMs per channel (CPU 0) / Support 1 R/LR-

DIMMs or 1 UDIMMs per channel (CPU 1)

Memory

Memory voltage 1.5V or 1.35V

PCI-E

(1) PCI-E x8 slot (x8 link, slot #5) / (1) PCI-E x8 slot

( x4 link, slot #3) / (1) PCI-E x16 slot ( x8 link, slot #4)

Expansion

Slots

PCI (1) PCI 32-bit slot (slot #2)

Port Q'ty (2) GbE ports

LAN

Controller Intel 82574L

Connector (8) SAS

Controller Intel C602 with TRK-6 upgrade ROM module

Speed 3.0 Gb/s

SAS

RAID RAID 0/1/10/5 (Intel Integrated RAID upgrade ROM 6)

Connector (6) SATA

Controller Intel C602

Speed (2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color)

Storage

SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Graphic

Chipset Aspeed AST2300

http://www.TYAN.com

13

Chipset Infineon SLB9635 (Optional)

TPM

Version TPM v1.2

USB

(9) USB2.0 ports (4 at rear, 4 via cable, 1 type A

onboard)

COM (1) DB-9 COM Connector / (1) 2*5 PIN COM header

SAS (8) SAS connectors

VGA (1) D-Sub 15-pin VGA port

RJ-45 (2) GbE ports

Power SSI 24-pin + 8-pin + 8-pin power connectors

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (4) SATA-II and (2) SATA-III connectors

Voltage

Monitors voltage for CPU, memory, chipset & power

supply

System

Monitoring

Temperature Monitors temperature for CPU & system environment

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management controller

(BMC) / Supports storage over IP and remote

platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100/1000

Mb/s MAC interface

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power on

mode after power recovery / User-configurable H/W

monitoring / Auto-configurable of hard disk types

Form Factor SSI CEB

Physical

Dimension

Board Dimension 12"x10.5" (305x267mm)

Operating

System

OS supported list Please visit our Web site for the latest update.

FCC (DoC) Class B

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Operating

Environment

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

RoHS RoHS 6/6 Compliant Yes

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package

Contains

Cable SATA (6) SATA signal cables

http://www.TYAN.com

14

TYAN S7040 (S7040GM2NR)

Supported CPU

Series

Intel Xeon Processor E5-2400 Series

Socket Type / Q'ty LGA1356 / (2)

Thermal Design

Power (TDP) wattage

Max up to 95W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel C602

Supported DIMM Qty (6)+(3) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 1066 / 1333 / 1600 RDIMM, 1066 /

1333 UDIMM / LRDIMM

Capacity

up to 288GB LRDIMM / 144GB RDIMM / 72GB

UDIMM

Memory channel

3 Channels per CPU / Support 2 R/LR-DIMMs or 2

UDIMMs per channel (CPU 0) / Support 1 R/LR-

DIMMs or 1 UDIMMs per channel (CPU 1)

Memory

Memory voltage 1.5V or 1.35V

PCI-E

(1) PCI-E x8 slot (x8 link, slot #5) / (1) PCI-E x8 slot

( x4 link, slot #3) / (1) PCI-E x16 slot ( x8 link, slot #4)

Expansion

Slots

PCI (1) PCI 32-bit slot (slot #2)

Port Q'ty (2) GbE ports

LAN

Controller Intel 82574L

Connector (10) SATA; (2) 6G + (8) 3G

Controller Intel C602

Speed (2) 6.0 Gb/s (blue color), (8) 3.0 Gb/s (black color)

Storage SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Graphic

Chipset Aspeed AST2300

Chipset Infineon SLB9635 (Optional)

TPM

Version TPM v1.2

USB

(9) USB2.0 ports (4 at rear, 4 via cable, 1 type A

onboard)

COM (1) DB-9 COM Connector / (1) 2*5 PIN COM header

VGA (1) D-Sub 15-pin VGA port

RJ-45 (2) GbE ports

Power SSI 24-pin + 8-pin + 8-pin power connectors

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (2) SATA-III and (8) SATA-II connectors

Voltage

Monitors voltage for CPU, memory, chipset & power

supply

System

Monitoring

Temperature

Monitors temperature for CPU & system environment

http://www.TYAN.com

15

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management controller

(BMC) / Supports storage over IP and remote

platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100/1000

Mb/s MAC interface

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power on

mode after power recovery / User-configurable H/W

monitoring / Auto-configurable of hard disk types

Form Factor SSI CEB

Physical

Dimension

Board Dimension 12"x10.5" (305x267mm)

Operating

System

OS supported list Please visit our Web site for the latest update.

FCC (DoC) Class B

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Operating

Environment

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

RoHS RoHS 6/6 Compliant Yes

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package

Contains

Cable SATA (6) SATA signal cables

S7040 SKU Comparison Table

Expansion

-slot

Model Chip PCH

LAN

1G

BMC

SAS

3 Gb/s

SAS Raid

SATA

6 Gb/s

SATA

3 Gb/s

X16 X8 PCI

S7040WGM2NR

C602

Pastburg-

A+ROM5

2 Yes 8 0/1/10 2 4 1/2/1

S7040GM2NR

C602 Pastburg-A 2 Yes 0 No 2 8 1/2/1

S7040GM4NR

C602 Pastburg-A 4 Yes 0 No 2 8 1/2/1

S7040G2NR

C602 Pastburg-A 2 No 0 No 2 8 1/2/1

S7040WGM4NR

[BTO]

C602

Pastburg-

A+ROM5

4 Yes 8 0/1/10 2 4 1/2/1

S7040WGM2NR5

[BTO]

C602

Pastburg-

A+ROM6

2 Yes 8 0/1/10/5 2 4 1/2/1

http://www.TYAN.com

16

1.3 - Software Specifications

For OS (operation system) support, please check the TYAN

®

website for the latest

information.

1.4 - AST2300 User Guide

Please visit our Web site for the latest AST2300 Configuration Guide at

http://www.tyan.com

.

http://www.TYAN.com

17

Chapter 2: Board Installation

You are now ready to install your motherboard.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, TYAN

®

recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic

bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

Caution!

1. To avoid damaging the motherboard and associated

components, do not use torque force greater than 7kgf/cm

(6.09 lb/in) on each mounting screw for motherboard

installation.

2. Do not apply power to the board if it has been damaged.

http://www.TYAN.com

18

2.1 - Board Image

S7040

This diagram is representative of the latest motherboard revision available at the

time of publishing. The board you receive may not look exactly like the above

diagram.

http://www.TYAN.com

19

2.2 - Block Diagram

SAS5

SAS6

SAS7

SAS8

SAS1

PCI Express x8

Front Rear

CPU 1

Sandy Bridge - EN

(Socket B2)

Intel Patsburg

PCH-A

ASpeed IBMC

AST2300

COM Port

Smart Fan Controller

USB 2.0

PCI Express x8

PWM Controller=ISL6353

Driver = 6620

Max Power 45W

PVTT = ISL95870

Max Power 21W

Vcore Controller ISL6364

Driver=ISL6622

TDP 95W

Vcore Controller ISL6364

DRIVER 6622

TDP 95W

PVTT = ISL95870

Max Power 21W

PCIE3

PCIE2

x2

DDRIII

Channel B Channel E

Channel A

Channel C

USB 2.0

D-Sub Connector

RGB

Clock Generator

ICS ICS932SQ420

DDRIII

Channel D

DDRIII

Channel F

CPU 0

Sandy Bridge - EN

(Socket B2)

PCIE1

DDRIII DDRIII

DDRIIIDDRIII

DDRIII

64Mb SPI System ROM

TPM

LPC Interface

QPI Port 0 (8.0GT/s)

Clock Buffer

ICS ICS9ZX21901B

PCI Express x4

Voltage and Thermal senser

PCIE Gen3 x8 Slot#4

DMI2 X4

PCIE Gen3 x8 Slot#5

PCIE Gen3 x4 Slot#3

PCIE Gen2*4

PCIE Gen2 x1

Intel 350 GBlan Port#1&2

82574L GB Port#4

SPI interface

PCIE Gen2 x1

NCSI Interface 1

SAS (3.0Gb/s)

SPI interface

SAS2

SAS3

SAS4

SATA Gen3 (6.0Gb/s)

SATA Gen2 (3.0Gb/s)

SATA1 SATA2

SATA3 SATA4

SATA5

SPI BMC FW flash ROM

SATA6

DDR3 Frame Buffer Memory

BMC FW 16M bit

USB 2.0

4x PCIE Gen2 Interface

USB 2.0

PCIE Uplink X4

PCI 3.0

PCI 3.0 Slot#2

PCI1

TYPE A

PWM Controller=ISL6353

Driver = 6620

Max Power 90WA

USB 2.0

82574L GB Port#3

PCIE Gen2 x1

S7040

http://www.TYAN.com

20

2.3 - Board Parts, Jumpers and Connectors

Important Notes to the User

• "▲" indicates the location of "Pin 1".

• Jumpers not indicated are for testing only.

• The diagram is representative of the latest board revision available at the time of

publishing. The board you received may not look exactly like this diagram.

NOTE: If the Intel Upgrade ROM Kit is installed, the SCU0 and SCU1 controllers of

the Patsburg chipset can support up 8 SAS/SATA Ports (SAS0~SAS7). If no Intel

Upgrade ROM Kit is installed, the SCU0 can only support 4 SATA Ports

(SAS0~SAS3) while the SCU1 will be SAS/SATA disabled (SAS4~SAS7).

Page is loading ...

Tyan S7040 User manual

Tyan S7040 User manual

Related papers

Other documents