Tyan S5515 User manual

http://www.tyan.com

1

S5515

Version 1.0

Copyright

this manual may be reproduced or translated without prior written consent from

MiTAC International Corporation.

Trademark

All registered and unregistered trademarks and company names contained in this

manual are property of their respective owners including, but not limited to the

following.

TYAN

®

is a trademark of MiTAC International Corporation.

Intel

®

is a trademark of Intel

®

Corporation.

AMI, AMI BIOS are trademarks of AMI Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

Winbond

®

is a trademark of Winbond Electronics Corporation.

Notice

Information contained in this document is furnished by MiTAC International

Corporation and has been reviewed for accuracy and reliability prior to printing.

MiTAC assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN

®

products including liability or

warranties relating to fitness for a particular purpose or merchantability. MiTAC

retains the right to make changes to product descriptions and/or specifications at

any time, without notice. In no event will MiTAC be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.tyan.com

2

http://www.tyan.com

3

Contents

Before you begin….................................................................................... 4

Chapter 1: Instruction ................................................................................ 5

1.1 Congratulations .................................................................................5

1.2 Hardware Specifications .................................................................. 5

1.3 Software Specifications ..................................................................... 7

Chapter 2: Board Installation..................................................................... 9

2.1 Board Image .................................................................................... 10

2.2 Block Diagram ................................................................................. 11

2.3 Board Parts, Jumpers and Connectors ...........................................12

2.4 Installing the Processor and Heat sink............................................22

2.5 Thermal Interface Material ..............................................................25

2.6 Tips on Installing Motherboard in Chassis ...................................... 26

2.7 Installing the Memory ...................................................................... 28

2.8 Attaching Drive Cables ....................................................................32

2.9 Installing Add-In Cards .................................................................... 33

2.10 Connecting External Devices ........................................................ 34

2.11 Installing the Power Supply ........................................................... 35

2.12 Finishing Up................................................................................... 36

Chapter 3: BIOS Setup .............................................................................37

3.1 About the BIOS................................................................................ 37

3.2 Main Menu....................................................................................... 39

3.3 Advanced Menu............................................................................... 40

3.4 PCI/PnP Menu................................................................................. 57

3.5 Boot ................................................................................................. 62

3.6 Security............................................................................................ 63

3.7 Save & Exit ...................................................................................... 64

Chapter 4: Diagnostics............................................................................. 65

4.1 Flash Utility ......................................................................................65

4.2 AMIBIOS Post Code (Aptio) ............................................................ 66

Glossary..................................................................................................... 73

Technical Support ....................................................................................79

http://www.tyan.com

4

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

1 x S5515 Motherboard

6 x SATA Cable

1 x COM dual-port Bracket Cable

1 x USB dual-port Bracket Cable

1 x IO shielding

1 x S5515 User’s manual

1 x S5515 Quick reference guide

1 x TYAN

®

Driver CD

IMPORTANT NOTE:

Sales sample may not come with the accessory listed above.

Please contact your sales representative to help order accessory for your

evaluation.

http://www.tyan.com

5

Chapter 1: Instruction

1.1 Congratulations

You have purchased the powerful TYAN

®

S5515 motherboard, based on the

Intel

®

Q67 and Nuvoton NCT5577D chipsets. The S5515 is designed to support

single Intel

®

2

nd

Gen. Core i3/i5/i7 series processor, and up to 32GB of un-

buffered non-ECC 1066/1333MHz DDR3 memory. Leveraging advanced

technology from Intel

®

, the S5515 is capable of offering scalable 32 and 64-bit

computing, high-bandwidth memory design, and lightning-fast PCI-E bus

implementation.

The S5515 not only empowers you in today’s demanding IT environment but also

offers a smooth path for future application upgradeability. All of these rich feature

sets provides the S5515 with the power and flexibility to meet demanding

requirements for today’s IT environments.

Remember to visit the TYAN

®

website at http://www.tyan.com. There you can

find all the information on all TYAN

®

products as well as all the supporting

documentation, FAQs, Drivers and BIOS upgrades.

1.2 Hardware Specifications

TYAN S5515 (S5515AG2NR)

Supported CPU

Series

Intel 2nd Gen. Core i3/ i5/ i7 series processors

Socket Type / Q'ty LGA 1155/ (1)

Processor

Thermal Design

Power (TDP)

wattage

Max up to 95W

PCH Intel Q67

Chipset

Super I/O Nuvoton 5577D

Supported DIMM

Qty

(4) DIMM slots

DIMM Type / Speed Unbuffered Non-ECC DDR3 / 1333/1066

Capacity Up to 32GB

Memory channel 2 Channels

Memory

Memory voltage 1.5V

PCI-E

(1) PCI-E Gen.2 x16 slot / (1) PCI-E Gen.2 x8 slot (w/

x4 link) / (1) PCI-E Gen.2 x1 slot

Expansion

Slots

PCI (1) PCI 32-bit slot

Port Q'ty (2)

LAN

Controller Intel 82583V

http://www.tyan.com

6

PHY Intel 82579LM

Connector (6) SATA

Controller Intel Q67

Speed (2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color)

Storage SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type

D-Sub 15-pin / DVI-D / Display port 1.1 / Only two

video output at the same time

Resolution Up to 1920x1024

Graphic

Chipset Intel Q67

Chipset Realtek ALC888

Audio

Feature High Definition Audio

USB

(9) USB2.0 ports (4 at rear, 4 via cable, 1 type A

onboard), (2) USB3.0 ports

COM (4) headers

VGA (1) D-Sub 15-pin VGA port / (1) Display port 1.1

DVI (1) connector

Audio LINE_IN, LINE_OUT, MIC_IN connectors

RJ-45 (2) GbE ports

Power SSI EEB/ATX 24-pin + 4-pin power connectors

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (4) SATA-II and (2) SATA-III connectors

Chipset Nuvoton 5577D

Voltage

Monitors voltage for CPU, memory, chipset & power

supply

Fan Total (3) 4-pin headers

System

Monitoring

Temperature Monitors temperature for CPU & system environment

Brand / ROM size 8MB / AMI

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power on

mode after power recovery / User-configurable H/W

monitoring / Auto-configurable of hard disk types

Form Factor Micro ATX

Physical

Dimension

Board Dimension 9.6"x9.6" (243.8x243.8mm)

Operating

System

OS supported list Please visit our Web site for the latest update.

FCC (DoC) Class B

Regulation

CE (DoC) Yes

Operating Temp. 0° C ~ 55° C (32° F~ 131° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

http://www.tyan.com

7

Motherboard (1) S5515 Motherboard

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

SATA (6) SATA signal cables

(1) COM dual-port bracket cable

Package

Contains

Cable

Others

(1) USB dual-port bracket cable

1.3 Software Specifications

For OS (operation system) support, please check with TYAN

®

support for latest

information.

http://www.tyan.com

8

NOTE

http://www.tyan.com

9

Chapter 2: Board Installation

You are now ready to install your motherboard.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, MiTAC recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic

bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

NOTE: Do not apply power to the board if it has been damaged.

http://www.tyan.com

10

2.1 Board Image

S5515

This picture is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above picture.

http://www.tyan.com

11

2.2 Block Diagram

S5515 Block Diagram

http://www.tyan.com

12

2.3 Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram. But

for the DIMM number please refer to the above placement for memory installation.

For the latest board revision, please visit our web site at http://www.tyan.com

.

http://www.tyan.com

13

Jumpers & Connectors

Jumper/Connector Function

Rear Fan/CPU Fan/Front Fan 4-pin Fan Connector

SATA_6G_0/SATA_6G_1 SATA3 Connector

SATA2/SATA3/SATA4/SATA5 SATA2 Connector

COM1/COM2/COM3/COM4 COM Port Header

J35 APS Header

J2 ID LED Switch Header

J20 Front Panel Header

J82 FP 82579 LAN Activity LED Header

J76 FP 82583 LAN Activity LED Header

INT_SPKR Internal Speaker Header

J4 CMOS Clear Jumper

F_AUDIO1 Front Audio Connector

U_SPI1 BIOS SPI ROM Header

FCFH1 Chassis Intrusion Header

J81 SATA DOM 2-pin Header

J6 Security Override Jumper

J13 SPDIF Header

J83 Speaker Header

FP_USB1/2 Front USB Connector

LED1 ID LED

AUX_Power_LED1 Aux Power LED 3-pin Header

USB_A Type-A USB Connector

Jumper Legend

OPEN - Jumper OFF

Without jumper cover

CLOSED - Jumper ON

With jumper cover

http://www.tyan.com

14

J35

COM1/COM4

COM2/COM3

CPU Fan

J2

Front Fan

Rear Fan

U_SPI1

http://www.tyan.com

15

Front Fan/CPU Fan/Rear Fan: 4-Pin FAN Connector

Pin 1 2 3 4

Signal GND VCC Tachometer PWM

Use this header to connect the cooling fan to your motherboard to keep the

system stable and reliable.

COM1/COM2/COM3/COM4: COM Port Header

Signal Pin Pin Signal

DCD 1 2 DSR

RXD 3 4 RTS

TXD 5 6 CTS

DTR 7 8 RI

1

2

10

9

GND 9 10 KEY-Pin

J35: APS Header

Signal Pin Pin Signal

3VSB 1 2 SLP_S3

SLP_S4 3 4 3VSB

SLP_A 5 6 SLP_SUSB

1

2

8

7

GND 7 8 VCC3

J2: ID LED Switch Header

Pin 1 2

1

Signal FP IDLED Switch GND

U_SPI1: BIOS SPI ROM Header

Signal Pin Pin Signal

SPI CS 1 2 3.3V Standby

SPI MISO 3 4 SPI HOLD#

SPI SP# 5 6 SPI Clock

1

2

8

7

GND 7 8 SPI MOSI

http://www.tyan.com

16

INT SPKR

J20

J82

J76

FCFH1

F AUDIO1

http://www.tyan.com

17

J20: Front Panel Connector

Signal Pin Pin Signal

VCC 1 2 GRN BLNK HRD

SATA LED 3 4 YLW BLNK HRD

GND 5 6 PWRBTN

FP RST 7 8 GND

1

2

10

VCC 9 10 NA

FCFH1: Chassis Intrusion Header

1

Use this header to disable the system chassis intrusion

alarm.

1

(Default)

Use this header to trigger the system chassis intrusion

alarm.

J76: 82583 LAN Activity LED Header

Signal Pin Pin Signal

1

VCC3 1 2 82583_LED_ACT-

J82: 82579 LAN Activity LED Header

Signal Pin Pin Signal

1

VCC3 1 2 LAN1_LINK_ACTIVITY-

F_AUDIO1: Front Audio Connector

Signal Pin Pin Signal

FP_MIC_L 1 2 AGND

FP_MIC_R 3 4 AUDIO_Detect

AUO_HPOUT_R 5 6 AUO_SENSE_MIC

FIO_SENSE 7 8 NC

10

9

2

1

FP_MIC_L 9 10 AUO_SENSE_HP

INT_SPKR: Internal Speaker Header

Signal Pin Pin Signal

1

INT_SPKR- 1 2 INT_SPKR+

http://www.tyan.com

18

J81

J13

LED1

FP USB 1/2

J98

J97

J96

J95

J94

SATA 2/3/4/5

http://www.tyan.com

19

J81: SATA DOM 2-pin Header

Signal Pin Pin Signal

1

VCC 1 2 GND

FP_USB1/FP_USB2: USB Front Panel Connector

Signal Pin Pin Signal

VCCUSB 1 2 VCCUSB

USB_DN0 3 4 USB_DN1

USB_DP0 5 6 USB_DP1

GND 7 8 GND

10

9

2

1

Guide 9 10 NC

LED1: ID LED

Pin Signal

+ P3V3_AUX

- ID_SW_L

State Color Description

On Blue System identified

Off Off System not identified

NOTE: IPMI can activate ID LED from remote site.

Please visit the TYAN Web Site at http://www.tyan.com

to download the

latest AST2050 Software Configuration Guide for IPMI settings.

USB_A: Vertical (Type A) USB Connectors

Pin 1 2 3 4

Signal +5V USB D- USB D+ GND

J13: SPDIF Header

Pin 1 2 3 4

4

1

Signal GND SPDIF_OUT NC VCC

SATA_2/SATA_3/SATA_4/SATA_5: SATA2 Connector

1 GND

2 SATA TX DP

3 SATA TX DN

4 GND

5 SATA RX DN

6 SATA RX DP

7

1

7 GND

Connects to the Serial ATA ready

drives via the Serial ATA cable.

NOTE: SATA_5 can support

SATA DOM Device.

http://www.tyan.com

20

J6

J4

A

UX Power LED1

SATA 6G 0/1

Page is loading ...

Tyan S5515 User manual

Tyan S5515 User manual

Related papers

Other documents