Tyan S7055 User manual

http://www.tyan.com

1

S7055

Version 1.0b

Copyright

this manual may be reproduced or translated without prior written consent from

MiTAC International Corporation.

Trademark

All registered and unregistered trademarks and company names contained in this

manual are property of their respective owners including, but not limited to the

following.

TYAN

®

is a trademark of MiTAC International Corporation.

Intel

®

is a trademark of Intel

®

Corporation.

AMI, AMI BIOS are trademarks of AMI Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

Winbond

®

is a trademark of Winbond Electronics Corporation.

Notice

Information contained in this document is furnished by MiTAC International

Corporation and has been reviewed for accuracy and reliability prior to printing.

MiTAC assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN

®

products including liability or

warranties relating to fitness for a particular purpose or merchantability. MiTAC

retains the right to make changes to product descriptions and/or specifications at

any time, without notice. In no event will MiTAC be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.tyan.com

2

About this guide

This user guide contains the information you need when installing and configuring

the motherboard.

How this guide is organized

This guide contains the following parts:

Chapter1: Instruction

This chapter describes the features of the motherboard and the new technology it

supports.

Chapter2: Board Installation

This chapter lists the hardware setup procedures that you need to abide by when

installing system components. It includes description of the jumpers and connectors

on the motherboard.

Chapter3: BIOS Setup

This chapter tells how to change system settings through the BIOS setup menu.

Detailed descriptions of the BIOS parameters are also provided.

Chapter4: Diagnostics

This chapter introduces some BIOS codes and technical terms to provide better

service for the customers.

Appendix I: Fan and Temp Sensors

This section aims to help readers identify the locations of some specific Fan and

Temp Sensors on the motherboard. A table of BIOS Temp sensor name

explanation is also included for readers’ reference.

Appendix II: RAID OPROM Configuration

This section describes how to setup the RAID system with the RAID OPROM Utility.

http://www.tyan.com

3

Contents

Before you begin…....................................................................................4

Chapter 1: Instruction ................................................................................5

1.1 Congratulations .................................................................................5

1.2 Hardware Specifications....................................................................5

1.3 Software Specifications...................................................................13

Chapter 2: Board Installation................................................................... 15

2.1 Board Image....................................................................................16

2.2 Block Diagram.................................................................................17

2.3 Mainboard Mechanical Drawing......................................................18

2.4 Board Parts, Jumpers and Connectors...........................................19

2.5 Installing the Processor and Heatsink.............................................35

2.6 Thermal Interface Material ..............................................................38

2.7 Tips on Installing Motherboard in Chassis .......................................39

2.8 Installing the Memory ......................................................................41

2.9 Attaching Drive Cables....................................................................47

2.10 Installing Add-In Cards..................................................................48

2.11 Connecting External Devices ........................................................49

2.12 Installing the Power Supply...........................................................50

2.13 Finishing Up...................................................................................51

Chapter 3: BIOS Setup .............................................................................53

3.1 About the BIOS................................................................................53

3.2 Main Menu.......................................................................................55

3.3 Advanced Menu...............................................................................56

3.4 Chipset Menu ..................................................................................82

3.5 Boot .................................................................................................91

3.6 Security............................................................................................92

3.7 Server Management........................................................................93

3.8 Event Logs.......................................................................................96

3.9 Save & Exit......................................................................................97

Chapter 4: Diagnostics............................................................................. 99

4.1 Flash Utility......................................................................................99

4.2 AMIBIOS Post Code (Aptio)..........................................................100

Appendix I: Fan and Temp Sensors .....................................................107

Appendix II: RAID OPROM Configuration ............................................ 111

Glossary................................................................................................... 113

Technical Support ..................................................................................119

http://www.tyan.com

4

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

1 x S7055 Motherboard

6 x SATA Single Cable

1 x IO shield

1 x S7055 Quick Installation Guide

1 x TYAN

®

Driver CD

IMPORTANT NOTE:

Sales samples may not come with any of the accessories listed above.

If you have ordered a sales sample and you are missing any of the above items,

please contact your sales representative to help order accessories.

http://www.tyan.com

5

Chapter 1: Instruction

1.1 Congratulations

You have purchased the powerful TYAN

®

S7055 motherboard, based on the

Intel

®

Patsburg (C602) chipset. The S7055 is designed to support dual Intel

®

Xeon E5-2600 Series processors, and up to 128GB RDIMM and 64GB UDIMM

DDR3 memory. Leveraging advanced technology from Intel

®

, the S7055 is

capable of offering scalable 32 and 64-bit computing, high-bandwidth memory

design, and lightning-fast PCI-E bus implementation.

The S7055 not only empowers you in today’s demanding IT environment but also

offers a smooth path for future application upgradeability. All of these rich feature

sets provide the S7055 with the power and flexibility to meet demanding

requirements for today’s IT environments.

Remember to visit the TYAN

®

website at http://www.tyan.com. There you can find

all the information on all TYAN

®

products as well as all the supporting

documentation, FAQs, Drivers and BIOS upgrades.

1.2 Hardware Specifications

TYAN S7055 (S7055AGM3NR)

Supported CPU

Series

Intel Xeon Processor E5-2600 Series

Socket Type / Q'ty (2) LGA2011

Thermal Design

Power (TDP)

wattage

150W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel C602

Supported DIMM

Qty

(4)+(4) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 800 / 1066 / 1333 / 1600 RDIMM,

1066 / 1333 / 1600 UDIMM, 1066 / 1333 LRDIMM/

Support DDR3 Unbuffered and Register ECC

Capacity

Up to 256GB RDIMM / 64GB UDIMM / 256GB

LRDIMM

Memory channel 4 Channels per CPU

Memory

Memory voltage 1.5V or 1.35V

PCI-E

(4) PCI-E x16 Gen3 slots (x16 link, slot #7, #5, #3,

#1) / (1) PCI-E x8 Gen2 slot (x4 link, slot #4)

Expansion Slots

PCI (1) PCI 32-bit slot (slot #2)

Recommended 4U Barebone FT48-B7055

http://www.tyan.com

6

Barebone /

Chassis

Port Q'ty (3) GbE ports

LAN

Controller Intel 82574L / Intel I350-BT2

Connector (10) SATA; (2) 6G + (8) 3G

Controller Intel C602

Speed

(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color)

+ (4) 3.0 Gb/s (mini-SAS connector)

Storage SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Graphic

Chipset Aspeed AST2300

Chipset Realtek ALC262

Audio

Feature HDA 2.0 spec. complaint

USB

(11) USB 2.0 ports (4 at rear, 6 via cable, 1 type A

onboard)

COM

(1) DB-9 COM Connector (at rear, COM1) + (1)

Header (COM2)

VGA (1) D-Sub 15-pin VGA port

Audio LINE_IN, LINE_OUT, MIC_IN connectors

RJ-45 (3) GbE ports

Power

SSI 24-pin + 8-pin + 8-pin + 4-pin power

connectors

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (4) SATA-II and (2) SATA-III connectors

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Fan Total (6) 4-pin headers

System

Monitoring

Temperature

Monitors temperature for CPU & system

environment

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100

Mb/s MAC interface

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power

on mode after power recovery / User-configurable

H/W monitoring / Auto-configurable of hard disk

types

Form Factor SSI EEB

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

Operating System OS supported list Please visit out Web site for the latest update.

http://www.tyan.com

7

FCC (DoC) Class A

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Motherboard (1) S7055 Motherboard

Manual (1) Quick Installation Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package Contains

Cable SATA (6) SATA signal cables

TYAN S7055 (S7055WAGM3NR)

Supported CPU

Series

Intel Xeon Processor E5-2600 Series

Socket Type / Q'ty (2) LGA2011

Thermal Design

Power (TDP)

wattage

150W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel C602

Supported DIMM

Qty

(4)+(4) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 800 / 1066 / 1333 / 1600 RDIMM,

1066 / 1333 / 1600 UDIMM, 1066 / 1333 LRDIMM/

Support DDR3 Unbuffered and Register ECC

Capacity

Up to 128GB RDIMM / 64GB UDIMM / 256GB

LRDIMM

Memory channel 4 Channels per CPU

Memory

Memory voltage 1.5V or 1.35V

PCI-E

(4) PCI-E Gen3 x16 slots (x16 link, slot #7, #5, #3,

#1) / (1) PCI-E Gen2 x8 slot (x4 link, slot #4)

Expansion Slots

PCI (1) PCI 32-bit slot (slot #2)

Recommended

Barebone /

Chassis

4U Barebone FT48-B7055

Port Q'ty (3) GbE ports

LAN

Controller Intel 82574L / Intel I350-BT2

Connector (2) Mini-SAS connectors (totally support 8 ports)

Storage SAS

Controller Intel C602 with TRK-5 upgrade ROM module

http://www.tyan.com

8

Speed 3.0 Gb/s

RAID RAID 0/1/10

Connector (6) SATA

Controller Intel C602

Speed (2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color)

SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Graphic

Chipset Aspeed AST2300

Chipset Realtek ALC262

Audio

Feature HDA 2.0 spec. complaint

USB

(11) USB 2.0 ports (4 at rear, 6 via cable, 1 type A

onboard)

COM

(1) DB-9 COM Connector (at rear, COM1) + (1)

Header (COM2)

SAS (2) Mini-SAS (4-in-1) connectors

VGA (1) D-Sub 15-pin VGA port

Audio LINE_IN, LINE_OUT, MIC_IN connectors

RJ-45 (3) GbE ports

Power

SSI 24-pin + 8-pin + 8-pin + 4-pin power

connectors

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (4) SATA-II and (2) SATA-III connectors

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Fan Total (6) 4-pin headers

System

Monitoring

Temperature

Monitors temperature for CPU & system

environment

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100

Mb/s MAC interface

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power

on mode after power recovery / User-configurable

H/W monitoring / Auto-configurable of hard disk

types

Form Factor SSI EEB

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

Operating System OS supported list Please visit out Web site for the latest update.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

http://www.tyan.com

9

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Motherboard (1) S7055 Motherboard

Manual (1) Quick Installation Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package Contains

Cable SATA (6) SATA signal cables

TYAN S7055 (S7055AGM3NR-2T [BTO])

Supported CPU

Series

Intel Xeon Processor E5-2600 Series

Socket Type / Q'ty (2) LGA2011

Thermal Design

Power (TDP)

wattage

150W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel C602

Supported DIMM

Qty

(4)+(4) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 800 / 1066 / 1333 / 1600 RDIMM,

1066 / 1333 / 1600 UDIMM, 1066 / 1333 LRDIMM/

Support DDR3 Unbuffered and Register ECC

Capacity

Up to 256GB RDIMM / 64GB UDIMM / 256GB

LRDIMM

Memory channel 4 Channels per CPU

Memory

Memory voltage 1.5V or 1.35V

PCI-E

(4) PCI-E Gen3 x16 slots (x16 link, slot #7, #5, #3,

#1) / (1) PCI-E Gen2 x8 slot (x4 link, slot #4)

Expansion Slots

PCI (1) PCI 32-bit slot (slot #2)

Recommended

Barebone /

Chassis

4U Barebone FT48-B7055

Port Q'ty (1) GbE port, (2) 10 GbE ports

LAN

Controller Intel 82574L / Intel X540-AT2

Connector (10) SATA; (2) 6G + (8) 3G

Controller Intel C602

Storage SATA

Speed

(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color)

+ (4) 3.0 Gb/s (mini-SAS connector)

http://www.tyan.com

10

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Graphic

Chipset Aspeed AST2300

Chipset Realtek ALC262

Audio

Feature HDA 2.0 spec. complaint

USB

(11) USB 2.0 ports (4 at rear, 6 via cable, 1 type A

onboard)

COM

(1) DB-9 COM Connector (at rear, COM1) + (1)

Header (COM2)

VGA (1) D-Sub 15-pin VGA port

Audio LINE_IN, LINE_OUT, MIC_IN connectors

RJ-45 (1) GbE port / (2) 10Gbe Ports

Power

SSI 24-pin + 8-pin + 8-pin + 4-pin power

connectors

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (4) SATA-II and (2) SATA-III connectors

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Fan Total (6) 4-pin headers

System

Monitoring

Temperature

Monitors temperature for CPU & system

environment

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100

Mb/s MAC interface

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power

on mode after power recovery / User-configurable

H/W monitoring / Auto-configurable of hard disk

types

Form Factor SSI EEB

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

Operating System OS supported list Please visit out Web site for the latest update.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

http://www.tyan.com

11

Motherboard (1) S7055 Motherboard

Manual (1) Quick Installation Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package Contains

Cable SATA (6) SATA signal cables

TYAN S7055 (S7055WGM3NR)

Supported CPU

Series

Intel Xeon Processor E5-2600 Series

Socket Type / Q'ty (2) LGA2011

Thermal Design

Power (TDP)

wattage

150W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel C602

Supported DIMM

Qty

(4)+(4) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 800 / 1066 / 1333 / 1600 RDIMM,

1066 / 1333 / 1600 UDIMM, 1066 / 1333 LRDIMM/

Support DDR3 Unbuffered and Register ECC

Capacity

Up to 256GB RDIMM / 64GB UDIMM / 256GB

LRDIMM

Memory channel 4 Channels per CPU

Memory

Memory voltage 1.5V or 1.35V

PCI-E

(4) PCI-E Gen3 x16 slots (x16 link, slot #7, #5, #3,

#1) / (1) PCI-E Gen2 x8 slot (x4 link, slot #4)

Expansion Slots

PCI (1) PCI 32-bit slot (slot #2)

Recommended

Barebone /

Chassis

4U Barebone FT48-B7055

Port Q'ty (3) GbE ports

LAN

Controller Intel 82574L / Intel I350-BT2

Connector (2) Mini-SAS connectors (totally support 8 ports)

Controller Intel C602 with TRK-5 upgrade ROM module

Speed 3.0 Gb/s

SAS

RAID RAID 0/1/10

Connector (6) SATA

Controller Intel C602

Speed (2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color)

Storage

SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Graphic

Chipset Aspeed AST2300

http://www.tyan.com

12

USB

(11) USB 2.0 ports (4 at rear, 6 via cable, 1 type A

onboard)

COM

(1) DB-9 COM Connector (at rear, COM1) + (1)

Header (COM2)

SAS (2) Mini-SAS (4-in-1) connectors

VGA (1) D-Sub 15-pin VGA port

RJ-45 (3) GbE ports

Power

SSI 24-pin + 8-pin + 8-pin + 4-pin power

connectors

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (4) SATA-II and (2) SATA-III connectors

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Fan Total (6) 4-pin headers

System

Monitoring

Temperature

Monitors temperature for CPU & system

environment

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100

Mb/s MAC interface

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power

on mode after power recovery / User-configurable

H/W monitoring / Auto-configurable of hard disk

types

Form Factor SSI EEB

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

Operating System OS supported list Please visit out Web site for the latest update.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Motherboard (1) S7055 Motherboard

Manual (1) Quick Installation Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package Contains

Cable SATA (6) SATA signal cables

http://www.tyan.com

13

1.3 Software Specifications

For the latest OS (operation system) support and IPMI Configuration Guide, please

visit our Web site for information.

http://www.tyan.com

14

NOTE

http://www.tyan.com

15

Chapter 2: Board Installation

You are now ready to install your motherboard.

How to install our products right… the first time

The first thing you should do is read this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, MiTAC recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic

bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

Caution!

1. To avoid damaging the motherboard and associated

components, do not use torque force greater than

7kgf/cm (6.09 lb/in) on each mounting screw for

motherboard installation.

2. Do not apply power to the board if it has been

damaged.

http://www.tyan.com

16

2.1 Board Image

S7055

This picture is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above picture.

http://www.tyan.com

17

2.2 Block Diagram

S7055 Block Diagram

http://www.tyan.com

18

2.3 Mainboard Mechanical Drawing

http://www.tyan.com

19

2.4 Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram. The

DIMM slot numbers shown above can be used as a reference when reviewing the

DIMM population guidelines shown later in the manual. For the latest board

revision, please visit our web site at http://www.tyan.com

.

http://www.tyan.com

20

Jumpers & Connectors

Jumper/Connector Function

J1 Front Panel Audio Header

J8 ID LED SW Header

SW1/LED1 ID LED Button / ID LED

J18/J19/J27/J44/J46/J48/J50 4-pin FAN Connector

J20 COM2 Header

J22 IPMB Connector

J23/J40/J55 USB Front Panel Header

J26 Front Fan Connector Reserved for Barebone

J28 / J65 SSI 8-pin CPU1 / CPU0 Power Connector

J57 SSI 4-pin PCIE Power Connector

J43 SSI 24-pin Power Connector

J31 TYAN Module Header

J34 Patsburg Upgrade ROM Module Connector

J36 / J38 Mini SAS Connector

J56 Vertical Type-A USB Connector

J41 Chassis Intrusion Header

J45 Front Panel Header

J49 SATA SGPIO Header for BB HD Board

J51 HDD FAULT Header for BB HD Board

J52 LAN3 LED Header

J58 PSMI Connector

J63/J64 SATA3.0 Connector (SATA1/SATA0)

J62/J61/J60/J59 SATA2.0 Connector (SATA2/3/4/5)

J66 Flash Security Override Header

J67 PCH Software SAS RAID Key Header

JP8 Memory Slot Event Select Jumper

JP9 Clear CMOS Jumper

JP10 ME Firmware Update Jumper

JP11 ME Recovery Mode Jumper

Jumper Legend

OPEN - Jumper OFF

Without jumper cover

CLOSED - Jumper ON

With jumper cover

Page is loading ...

Tyan S7055 User manual

Tyan S7055 User manual

Related papers

Other documents