MiTAC TYAN S5555 Series User manual

http://www.tyan.com

1

S5555

Version 1.0

Copyright

this manual may be reproduced or translated without prior written consent from

MiTAC International Corporation.

Trademark

All registered and unregistered trademarks and company names contained in this

manual are property of their respective owners including, but not limited to the

following.

TYAN

®

is a trademark of MiTAC International Corporation.

Intel

®

is a trademark of Intel

®

Corporation.

AMI, AMI BIOS are trademarks of AMI Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

Winbond

®

is a trademark of Winbond Electronics Corporation.

Notice

Information contained in this document is furnished by MiTAC International

Corporation and has been reviewed for accuracy and reliability prior to printing.

MiTAC assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN

®

products including liability or

warranties relating to fitness for a particular purpose or merchantability. MiTAC

retains the right to make changes to product descriptions and/or specifications at

any time, without notice. In no event will MiTAC be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.tyan.com

2

Contents

S5555 ............................................................................................................ 1

Before you begin… .................................................................................... 3

Chapter 1: Instruction ................................................................................ 4

1.1 Congratulations ................................................................................. 4

1.2 Hardware Specifications .................................................................... 4

1.3 Software Specifications ..................................................................... 7

Chapter 2: Board Installation ..................................................................... 8

2.1 Board Image ...................................................................................... 9

2.2 Block Diagram ................................................................................. 10

2.3 Motherboard Mechanical Drawing ................................................... 11

2.4 Board Parts, Jumpers and Connectors ........................................... 12

2.5 Installing the Processor and Heatsink ............................................. 18

2.7 Tips on Installing Motherboard in Chassis ...................................... 22

2.8 Installing the Memory ...................................................................... 24

2.9 Attaching Drive Cables .................................................................... 29

2.10 Installing Add-In Cards .................................................................. 30

2.11 Connecting External Devices ........................................................ 31

2.12 Installing the Power Supply ........................................................... 33

2.13 Finishing Up ................................................................................... 33

Chapter 3: BIOS Setup ............................................................................. 34

3.1 About the BIOS ................................................................................ 34

3.2 Main Menu ....................................................................................... 36

3.3 Advanced Menu ............................................................................... 37

3.4 Chipset Menu .................................................................................. 68

3.5 Security ............................................................................................ 74

3.6 Boot ................................................................................................. 81

3.7 Save & Exit ...................................................................................... 84

Chapter 4: Diagnostics ............................................................................. 86

4.1 Flash Utility ...................................................................................... 86

4.2 AMIBIOS Post Code (Aptio) ............................................................ 87

Appendix I: Fan and Temp Sensors ....................................................... 94

Glossary ..................................................................................................... 97

Technical Support .................................................................................. 103

http://www.tyan.com

3

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

S5555 Motherboard x 1

SATA Single Cable x 2

Rear IO shielding x 1

1 x S5555 Quick Installation Guide

1 x TYAN

®

Driver CD

IMPORTANT NOTE:

1. Sales samples may not come with any of the accessories listed above.

If you have ordered a sales sample and you are missing any of the above items,

please contact your sales representative to help order accessories.

http://www.tyan.com

4

Chapter 1: Instruction

1.1 Congratulations

You have purchased the powerful TYAN

®

S5555 motherboard, based on the Intel

®

C246/H310/Q370 chipset (Cannon lake-PCH). The S5555 is designed to support

Intel

®

Coffee

lake E-series and i3/i5/i7 series Processors, and support UDIMM w/

ECC 2666 up to 64 GB DDR4 memory. Leveraging advanced technology from Intel

®

,

the S5555 is capable of offering scalable 32 and 64-bit computing, high-bandwidth

memory design, and lightning-fast PCI-E bus implementation.

The S5555 not only empowers you in today’s demanding IT environment but also

offers a smooth path for future application upgradeability. All of these rich feature

sets provide the S5555 with the power and flexibility to meet demanding

requirements for today’s IT environments.

Remember to visit the TYAN

®

website at http://www.tyan.com. There you can find all

the information on all TYAN

®

products as well as all the supporting documentation,

FAQs, Drivers and BIOS upgrades.

1.2 Hardware Specifications

S5555AG2NR Specifications

Processor

Supported CPU

Series

8th Gen. Intel Core i7/i5/i3 Processors

Q'ty / Socket Type

(1) LGA1151

Thermal Design

Power (TDP)

wattage

Max up to 95W

Chipset

PCH / PCI-E Switch

Intel® Q370

Memory

Supported DIMM

Qty

(4) DIMM slots

DIMM Type / Speed

UDIMM DDR4 2666/2400/2133

Capacity

Up to 64GB

*Follow latest Intel DDR4 Memory POR

Memory channel

2 Channels

Memory voltage

1.2V

Expansion

Slots

PCI-E

(1) PCI-E Gen3 x16 slot

(2) PCI-E Gen3 x8 slots (w/ x4 link)

LAN

Port Q'ty

(2) GbE ports

Controller

Intel® I210-AT

PHY

Intel® I219-LM (Intel AMT support)

SATA

Connector

(4) SATA + (2) SATA-DOM

Controller

Intel® Q370

Storage

Speed

6.0 Gb/s

http://www.tyan.com

5

RAID

RAID 0/1/10/5 (Intel® RSTe)

NVMe

Connector

(M.2)

(1) 2280/2242 (by PCI-E interface)

Graphic

Connector type

(1) DVI-D, (2) Display port 1.2

Chipset

Intel® Processor Graphics(pGFX)

Audio

Chipset

Realtek® ALC892-CG

Feature

7.1 ch

Input

/Output

USB

(2) USB 2.0 ports (at rear)

(4) USB3.1 Gen2 ports (at rear)

(2) USB 2.0 header

(2) USB 3.1 Gen 1 header

COM

(2) headers

RJ-45

(2) GbE ports

DVI

(1) DVI-D connector

Audio

(1) 2x5-pin header

(1) 5 holes Audio Jack+SPDIF fiber connector

SATA

(4) SATA-III connectors + (2) SATA-DOM

Display port

(2) Display ports 1.2

TPM

(Optional)

TPM Support

Please refer to our TPM supported list.

System

Monitoring

AMT Feature

Support Power on/ Power off/ Restart at remote side

Chipset

NCT6683D-T

Fan

Total (4) 4-pin headers

Temperature

Monitors temperature for CPU & system environment

Others

Watchdog timer support

BIOS

Brand / ROM size

AMI / 32MB

Feature

Hardware Monitor, PXE boot support, ACPI sleeping states

S3,S4,S5, User Configurable FAN PWM Duty Cycle, Console

Redirection, ACPI 6.1, SMBIOS 3.1/PnP/Wake on LAN

Form Factor

Micro ATX

Board Dimension

9.6" x 9.6" (243.8 x 243.8mm)

Operating

System

OS supported list

Please refer to our Intel OS supported list.

Regulation

FCC (SDoC)

Class B

CE (DoC)

Class B

Operating

Environment

Operating Temp.

0° C ~ 55° C (32° F~ 131° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

In/Non-operating

Humidity

90%, non-condensing at 35° C

Non-operating Relative Humidity: 10% to 95% (non-condensing)

RoHS

RoHS 6/6

Complaint

Yes

http://www.tyan.com

6

Operating

System

OS supported list

Please refer to our AVL support lists.

Package

Contains

Motherboard

(1) S5555AG2NR Motherboard

SATA Single Cable

(2) SATA Single Cable

Rear IO shielding

(1) Rear IO shielding

Manual

(1) Quick Installation Guide

Installation CD

(1) TYAN Device Driver CD

S5555AG2NR-HE Specifications

Processor

Supported CPU

Series

Intel Xeon E-2100 series processors

Q'ty / Socket Type

(1) LGA1151

Thermal Design

Power (TDP)

wattage

Max up to 95W

Chipset

PCH / PCI-E Switch

Intel® C246

Memory

Supported DIMM

Qty

(4) DIMM slots

DIMM Type / Speed

UDIMM ECC DDR4 2666/2400/2133

Capacity

Up to 64GB

*Follow latest Intel DDR4 Memory POR

Memory channel

2 Channels

Memory voltage

1.2V

Expansion

Slots

PCI-E

(1) PCI-E Gen3 x16 slot

(2) PCI-E Gen3 x8 slots (w/ x4 link)

LAN

Port Q'ty

(2) GbE ports

Controller

Intel® I210-AT

PHY

Intel® I219-LM (Intel AMT support)

SATA

Connector

(4) SATA + (2) SATA-DOM

Controller

Intel® C246

Storage

Speed

6.0 Gb/s

RAID

RAID 0/1/10/5 (Intel® RSTe)

NVMe

Connector

(M.2)

(1) 2280/2242 (by PCI-E interface)

Graphic

Connector type

(1) DVI-D, (2) Display port 1.2

Chipset

Intel® Processor Graphics(pGFX)

Audio

Chipset

Realtek® ALC892-CG

Feature

7.1 ch

Input

/Output

USB

(2) USB 2.0 ports (at rear)

(4) USB3.1 Gen2 ports (at rear)

(2) USB 2.0 header

(2) USB 3.1 Gen 1 header

COM

(2) header

RJ-45

(2) GbE ports

http://www.tyan.com

7

DVI

(1) DVI-D connector

Audio

(1) 2x5-pin header

(1) 5 holes Audio Jack+SPDIF fiber connector

SATA

(4) SATA-III connectors + (2) SATA-DOM

Display port

(2) Display ports 1.2

TPM

(Optional)

TPM Support

Please refer to our TPM supported list.

System

Monitoring

AMT Feature

Support Power on/ Power off/ Restart at remote side

Chipset

NCT6683D-T

Fan

Total (4) 4-pin headers

Temperature

Monitors temperature for CPU & system environment

Others

Watchdog timer support

BIOS

Brand / ROM size

AMI / 32MB

Feature

Hardware Monitor, PXE boot support, ACPI sleeping states

S3,S4,S5, User Configurable FAN PWM Duty Cycle, Console

Redirection, ACPI 6.1, SMBIOS 3.1/PnP/Wake on LAN

Form Factor

Micro ATX

Board Dimension

9.6" x 9.6" (243.8 x 243.8mm)

Operating

System

OS supported list

Please refer to our Intel OS supported list.

Regulation

FCC (SDoC)

Class B

CE (DoC)

Class B

Operating

Environment

Operating Temp.

Operating Temp. 0° C ~ 55° C (32° F~ 131° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

In/Non-operating

Humidity

90%, non-condensing at 35° C

Non-operating Relative Humidity: 10% to 95% (non-condensing)

RoHS

RoHS 6/6

Complaint

Yes

Operating

System

OS supported list

Please refer to our AVL support lists.

Package

Contains

Motherboard

(1) S5555AG2NR-HE Motherboard

SATA Single Cable

(2) SATA Single Cable

Rear IO shielding

(1) Rear IO shielding

Manual

(1) Quick Installation Guide

Installation CD

(1) TYAN Device Driver CD

1.3 Software Specifications

For the latest AST2500 User’s Guide and OS (operation system) support, please visit

the Tyan’s Web site at http://www.tyan.com for the latest information

http://www.tyan.com

8

Chapter 2: Board Installation

You are now ready to install your motherboard.

How to install our products right… the first time

The first thing you should do is read this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, MiTAC recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic

bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

Caution!

1. To avoid damaging the motherboard and associated

components, do not use torque force greater than

5~7kgf/cm (4.35~6.09 lb/in) on each mounting screw

for motherboard installation.

2. Do not apply power to the board if it has been

damaged.

http://www.tyan.com

9

2.1 Board Image

S5555AG2NR

This picture is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above picture.

http://www.tyan.com

10

2.2 Block Diagram

S5555 Block Diagram

http://www.tyan.com

11

2.3 Motherboard Mechanical Drawing

http://www.tyan.com

12

2.4 Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram. The

DIMM slot numbers shown above can be used as a reference when reviewing the

DIMM population guidelines shown later in the manual. For the latest board revision,

please visit our web site at http://www.tyan.com.

http://www.tyan.com

13

Motherboard Components

Connectors

IO

Ports

1. RJ45 LAN port(i210)+USB2.0 port (J3)

2. Display Port#2 (J6)

3. VIDEO-DVI-D (J1)

4. USB3.1Port x2 (J4)+Display Port#1(J5)

5. RJ45 LAN port (i219)+USB3.1Port (J7)

6. Audio x5 + SPDIF OUT x1 (J2)

7. LAN LED Header (i219)(J8)

18. TYAN Module Header (DBG_HD1)

8. Front Audio x 2 Header(J64)

19. SATA 2 (SATA-DOM)(J46)

9. M.2 (PCIE) Connector (NGFF1)

20. SYS_FAN_2 (J54)

10. FPB USB2.0/ USB3.1*2 Connector

(J63)

21. COM Port 1 (J51)

11. FPB USB2.0*2 Connector(J65)

22. COM Port 2 (J52)

12. Front Panel Header (Power Button/

Reset Button / HDD Active LED/ Power ON

LED) (J29)

23. ATX Power Connector 24P (PW1)

13. SATA 5 (J37)

24. SYS_FAN_1 (J56)

14. SATA 3 (J39)

25. CPU0_FAN (J28)

15. SATA 4 (J47)

26. ATX Power Connector 8P (PW2)

16. SATA 1 (J55)

27. LAN LED Header (I210)(J15)

17. SATA 0 (SATA-DOM) (J48)

28. SYS_ FAN_3 (J10)

Headers/Jumpers

a. SATA-DOM power rail option for Pin1

(Optional for different type SATA-DOM

module) (J38)

c. Clear CMOS Jumper (Load BIOS

Default Set Up)（J60）

b. SATA-DOM power rail option for Pin7

(Optional for different type SATA-DOM

module) (J43)

PCIE Slots

A. PCIE 3.0 Slot x16 (J14)

C. PCIE 3.0 Slot x8 (J12)

B. PCIE 3.0 Slot x8 (J13)

Memory Slots

E. Memory CPU_MC0_DIMM_A0 (J30)

F. Memory CPU_MC0_DIMM_A1 (J31)

G. Memory CPU_MC0_DIMM_B0 (J34)

H. Memory CPU_MC0_DIMM_B1(J36)

http://www.tyan.com

14

CPU0 FAN/ SYS FAN1~3: 4-pin CPU Fan Connector(J28, J56, J54, J10)

1

2

3

4

Signal

GND

VCC12

FAN_TACH

PWM

Use this header to connect the cooling fan to your motherboard to

keep the system stable and reliable.

Note: A 4-pin fan is required for fan support 4pin Control

FPIO1: Front Panel Header

Signal

SATA_LED_PWR

1

2

GRN_BLNK_HRD

SATA_LED_D_N

3

4

YLW_BLNK_HRD

GND

5

6

PWRBT_N_R

FP_RST_R_N

7

8

GND

FP PWR

9

10

SATA1/SATA3/SATA4 SATA5/: SATA Connectors (J55, J39, J47, J37)

7

1

Name

TYPE

S1

GND

S2

TXP

S3

TXN

S4

GND

S5

RXN

S6

RXP

S7

GND

Connects to the Serial ATA ready drives via the Serial ATA

cable.

SATA0/SATA2: SATA DOM Connectors (J48, J46)

7

1

Name

TYPE

S1

GND

S2

TXP

S3

TXN

S4

GND

S5

RXN

S6

RXP

S7

P5V

Connects to the Serial ATA ready drives via the Serial ATA

cable.

http://www.tyan.com

15

COM Port 1/ COM Port 2: Internal Serial Port Header Pin-out (J51,J52)

Signal

SPA_DCD

1

2

SPA_DSR

SPA_SIN_N

3

4

SPA_RTS

SPA_OUT_N

5

6

SPA_CTS

SPA_DTR

7

8

SPA_RI

GND

9

DBG_HD1: TYAN Module Header(J62)

Signal

P3V3

1

2

FRAME_N

LAD0

3

4

KEY

LAD1

5

6

PLT_RST_N

LAD2

7

8

GND

LAD3

9

10

CLK_33M

DBG_SERIRQ

11

12

GND

DBG_PRES_N

13

14

VCC3_AUX

P3V3(NI) / GND

15

16

RST_ESPI_RESET_N

J63: Front USB2.0/ USB3.1*2 Connector

Signal

+5V

1

2

P0_RX_N

P0_RX_P

3

4

GND

P0_TX_N

5

6

P0_TX_P

GND

7

8

P0_N

P0_P

9

10

OC_N

P1_P

11

12

P1_N

GND

13

14

P1_TX_P

P1_TX_N

15

16

GND

P1_RX_P

17

18

P1_RX_N

+5V

19

20

Key

J8: LAN LED Header (i219)

Signal

1

LAN_i219_LED+

2

LAN_i219_LED-

J15: LAN LED Header (I210)

Signal

1

LAN_i210_LED+

2

LAN_i210_LED-

http://www.tyan.com

16

J65: USB2.0*2 Connector

Signal

+5V

1

2

+5V

USB DATA1-

3

4

USB DATA2-

USBDATA1+

5

6

USB DATA2+

GND

7

8

GND

KEY

9

10

GND

J64: Front Audio x 2 Header

Signal

MIC2-L

1

2

GND

MIC2-R

3

4

FP_Present

LINE2-R

5

6

MIC2-JD

GND

7

8

Key

LINE2_L

9

10

LINE2-JD

J38: SATA-DOM power rail option for Pin1

1

2

3

Signal

5V

SATA-DOM P1

GND

Pin 1-2 Closed: P5V(Default)

Pin 2-3 Closed: GND

J43: SATA-DOM power rail option for Pin7

1

2

3

Signal

5V

SATA-DOM P7

GND

Pin 1-2 Closed: P5V(Default)

Pin 2-3 Closed: GND

http://www.tyan.com

17

J60: Clear CMOS Jumper

Normal (Default)

Clear CMOS

1

2

3

Signal

VBAT

RTCRST#

GND

You can reset the CMOS settings by using this jumper.

This can be useful if you have forgotten your system/setup

password, or need to clear the system BIOS setting.

1. Power off system and disconnect power connectors from

the motherboard.

2. Remove the jumper from Pin_1 and Pin_2 (Default

setting).

3. Move the jumper cap to close Pin_2 and Pin_3 for

several seconds to Clear CMOS.

4. Put jumper cap back to Pin_1 and Pin_2 (Default setting).

5. Reconnect power connectors to the motherboard and

power on system.

http://www.tyan.com

18

2.5 Installing the Processor and Heatsink

The types of processors supported by the S5555 are listed in the 1.2 Hardware

Specifications section on page 4. Check our website at http://www.tyan.com for

the latest list of validated Intel

®

processors for this specific motherboard.

NOTE: MiTAC is not liable for damage as a result of operating an

unsupported configuration.

Processor Installation (Single Socket LGA1151 for Intel Coffee lake CPU)

Follow the steps below to install the processors and heat sinks.

Please note that the illustrations are based on LGA1151 socket which may not look

exactly like the motherboard you purchased. Therefore, the illustrations should be

held for your reference only.

NOTE: Please save and replace the flip CPU protection cap when returning for

service.

1. Press to unlock the lever and open the CPU socket cover.

2. Open the socket cover to a fully position.

http://www.tyan.com

19

3. Remove the socket protection cap. NOTE: Save and replace the socket cover

if the processor is removed from its socket.

4. Install the processor and make sure the golden arrow is in the right direction.

5. Close the CPU socket cover.

6. Close the socket lever.

http://www.tyan.com

20

Heat sink Installation

After installing the processor, you will need to proceed to install the heat sink. The

CPU heat sink will ensure that the processor do not overheat and continue to

operate at maximum performance for as long as you own them. An overheated

processor is dangerous to the motherboard. The processors will overheat within

seconds, enter thermal protection, and shut down if heatsinks are not installed.

Caution：Take caution of the air flow must be in the direction which paralleled with

memories.

For the safest method of installation and information on choosing the appropriate

heat sink, using heat sinks validated by Intel

®

. Please refer to the Intel

®

website:

http://www.intel.com

The following diagram illustrates how to install the heatsink on the Intel

®

Coffee lake

Socket LGA1151:

1. Apply the thermal grease.

2. Place the heat sink on top of the CPU.

Page is loading ...

MiTAC TYAN S5555 Series User manual

This manual is also suitable for

MiTAC TYAN S5555 Series User manual

Related papers

Other documents