1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
3-in-1 Superball Camera Tripod Ball Head
with Lever Clamp (BH-SPBL-02)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Allen Key 4 mm
BS 100
Proaim 3-in-1 Superball Camera Tripod Ball
Head with Lever Clamp
2
3-in-1 Superball Tripod Ball Head Setup
• Mount the ball head on the tripod stand (Not
Included) and twist the head clockwise to
ghten it.
Feature: The premium equipment is engineered
with aenon to detail and funconality to serve
as a ball head, gimbal head, and leveling
panoramic head.
• Aach the arca-type quick-release plate to the
camera (Not Included) by ghtening its bolt
using the Allen key, as shown in the image.
• Press the detent pin of the quick-release plate
and slide the camera (Not Included) onto the
plate.
Feature: The clamp has a single bubble level that
balances and levels the camera for leveled shots.
• Secure the Camera using the locking lever.
NOTE: It includes a locking lever and a detent pin
that prevents the camera from sliding -o.
• Convert the ball head into a standard
funconing ball head for panning shots by
loosening the independent pan-locking knob.
Feature: You can unlock the independent pan
lock and rotate your lens to achieve smooth
panning shots.
• Re-ghten the knob aer lming panning shot,
as shown in the image.
3
NOTE: You can increase or decrease the ball
head’s tension via the provided tension control
knob.
• The smartly designed 3-in-1 Superball Head
oers you leverage to posion your camera in
various shoong angles.
• You can posion the camera (Not Included),
according to your requirement, as shown in
the image.
• Aer posioning the camera (Not Included),
secure it using the tension control knob.
• To convert the 3/8"-16 base mounng of the
ball head into 1/4"-16, insert BS100 and
mount the ball head on the Tripod stand (Not
Included).
NOTE: With the clamp removed, the ball head's
stem has the same 3/8"-16 mount as the base.
• Now, loosen the bolt of the Arca-Type quick
release Plate using the Allen key.
4
• Remove the bolt to mount the quick release
plate aer reversing the ball head.
• Now, re-insert the bolt, as shown in the image.
• Aer inserng the bolt, ghten it using the
Allen key.
Feature: It has an Arca-type quick-release clamp
on the head, with a laser-engraved scale,
allowing you to balance a telephoto lens at a 90°
angle for using it as a gimbal head.
• Mount the ball head on the tripod stand
(Not Included).
• The setup is nally ready.
5
YOUR PROAIM 3-IN-1 SUPERBALL CAMERA TRIPOD BALL HEAD
WITH LEVER CLAMP
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
/
