Arducam B0399B0283 User guide

B0399B0283
Arducam
Brand
Arducam
Model
B0399B0283
Type
User guide
for Raspberry Pi Cameras
Published in June 2022
by ARDUCAM TECHNOLOGY CO., LIMITED
Getting Started
SKUB0399B0283
Pan-Tilt Kit
Packing List
Installation
The kit is compatible with the ocial camera module V1, V2, HQ and Arducam Pi
cameras with same form factors.
Keep the servo arms in the original position so no further calibration is required.
Turn o your Raspberry Pi and disconnect the power supply.
1. Install the controller board.
2. Install the pre-assembled pan servo.
×1
×2
×1
×1 ×1
×4 ×1
×1 ×1
×5
×10
Pan-Tilt Kit for Raspberry Pi Cameras
1
M2×4mm
M2×6mm
M2×6mm
M2×6mm
Pan-Tilt Kit for Raspberry Pi Cameras
2
Installation
3. Install the pre-assembled tilt servo.
4. Connect the servos to the controller board.
5. Connect the pan-tilt kit to your Raspberry Pi.
Follow the servo motors' wire colors but not the jumper wires'. The colors of the jumper
wires are used to distinguish between each other only and do not need to be matched
in real wire connection to the Raspberry Pi.
M2×6mm
W
R
BW
R
B
L
L
R
R
Top viewBack view
NOTE: Pls make sure the wires to
the servo are correctly connected.
Pan-Tilt Kit for Raspberry Pi Cameras
3
Operating the Pan-Tilt Kit
1. Clone demo code
git clone hps://github.com/ArduCAM/PCA9685.git
2. Enter the target directory
cd PCA9685/
3. Compile the code
make
4. Run the demo
sudo ./RunServoDem
Use the arrow keys on the keyboard to control the camera pan and
tilt direction.
www.arducam.com
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi Foundation
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Arducam B0399B0283 User guide

B0399B0283
Arducam
Brand
Arducam
Model
B0399B0283
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents