1. Remove round strainer from drain head.
2. Set the square adapter on the drain head
and align the two screw holes with the screw
receivers in drain head.
3. Using screws provided (machine screws
for heads with brass thread inserts,
standard screws for no inserts) fasten the
square adapter to the drain head.
4. Snap strainer in place with four strainer
legs in contact with four receivers in drain
head and remove protective fi lm.
TIP: If strainer is loose, the strainer legs can
be bent slightly (with pliers) to provide more
(or less, if diffi cult to snap in) contact with
receivers.
5. If screws are visible through strainer
after installation, turn strainer 90° and
re-set.
Square Strainer & Adapter
Installation Instructions
A: Use machine screws for heads
with brass thread inserts
B: Use standard screws for heads
with no inserts / pilot holes
1-800-821-3944 www.siouxchief.com
#IS-821QA SQUARE ADAPTER INSTRUCTION SHEET
© 2011 SIOUX CHIEF MFG.
Always be aware of, and follow local plumbing codes
Failure to follow these instructions could result in personal injury or property damage
Converts round shower drain head/strainer to square
Designed for use with Sioux Chief 821 Series shower pan drains
Not for use with other types of shower drains
AB
1. Remove round strainer from drain head.
2. Set the square adapter on the drain head
and align the two screw holes with the screw
receivers in drain head.
3. Using screws provided (machine screws
for heads with brass thread inserts,
standard screws for no inserts) fasten the
square adapter to the drain head.
4. Snap strainer in place with four strainer
legs in contact with four receivers in drain
head and remove protective fi lm.
TIP: If strainer is loose, the strainer legs can
be bent slightly (with pliers) to provide more
(or less, if diffi cult to snap in) contact with
receivers.
5. If screws are visible through strainer
after installation, turn strainer 90° and
re-set.
Square Strainer & Adapter
Installation Instructions
A: Use machine screws for heads
with brass thread inserts
B: Use standard screws for heads
with no inserts / pilot holes
1-800-821-3944 www.siouxchief.com
#IS-821QA SQUARE ADAPTER INSTRUCTION SHEET
© 2011 SIOUX CHIEF MFG.
Always be aware of, and follow local plumbing codes
Failure to follow these instructions could result in personal injury or property damage
Converts round shower drain head/strainer to square
Designed for use with Sioux Chief 821 Series shower pan drains
Not for use with other types of shower drains
AB
1. Remove round strainer from drain head.
2. Set the square adapter on the drain head
and align the two screw holes with the screw
receivers in drain head.
3. Using screws provided (machine screws
for heads with brass thread inserts,
standard screws for no inserts) fasten the
square adapter to the drain head.
4. Snap strainer in place with four strainer
legs in contact with four receivers in drain
head and remove protective fi lm.
TIP: If strainer is loose, the strainer legs can
be bent slightly (with pliers) to provide more
(or less, if diffi cult to snap in) contact with
receivers.
5. If screws are visible through strainer
after installation, turn strainer 90° and
re-set.
Square Strainer & Adapter
Installation Instructions
A: Use machine screws for heads
with brass thread inserts
B: Use standard screws for heads
with no inserts / pilot holes
1-800-821-3944 www.siouxchief.com
#IS-821QA SQUARE ADAPTER INSTRUCTION SHEET
© 2011 SIOUX CHIEF MFG.
Always be aware of, and follow local plumbing codes
Failure to follow these instructions could result in personal injury or property damage
Converts round shower drain head/strainer to square
Designed for use with Sioux Chief 821 Series shower pan drains
Not for use with other types of shower drains
AB
1. Remove round strainer from drain head.
2. Set the square adapter on the drain head
and align the two screw holes with the screw
receivers in drain head.
3. Using screws provided (machine screws
for heads with brass thread inserts,
standard screws for no inserts) fasten the
square adapter to the drain head.
4. Snap strainer in place with four strainer
legs in contact with four receivers in drain
head and remove protective fi lm.
TIP: If strainer is loose, the strainer legs can
be bent slightly (with pliers) to provide more
(or less, if diffi cult to snap in) contact with
receivers.
5. If screws are visible through strainer
after installation, turn strainer 90° and
re-set.
Square Strainer & Adapter
Installation Instructions
A: Use machine screws for heads
with brass thread inserts
B: Use standard screws for heads
with no inserts / pilot holes
1-800-821-3944 www.siouxchief.com
#IS-821QA SQUARE ADAPTER INSTRUCTION SHEET
© 2011 SIOUX CHIEF MFG.
Always be aware of, and follow local plumbing codes
Failure to follow these instructions could result in personal injury or property damage
Converts round shower drain head/strainer to square
Designed for use with Sioux Chief 821 Series shower pan drains
Not for use with other types of shower drains
AB
1. Remove round strainer from drain head.
2. Set the square adapter on the drain head
and align the two screw holes with the screw
receivers in drain head.
3. Using screws provided (machine screws
for heads with brass thread inserts,
standard screws for no inserts) fasten the
square adapter to the drain head.
4. Snap strainer in place with four strainer
legs in contact with four receivers in drain
head and remove protective fi lm.
TIP: If strainer is loose, the strainer legs can
be bent slightly (with pliers) to provide more
(or less, if diffi cult to snap in) contact with
receivers.
5. If screws are visible through strainer
after installation, turn strainer 90° and
re-set.
Square Strainer & Adapter
Installation Instructions
A: Use machine screws for heads
with brass thread inserts
B: Use standard screws for heads
with no inserts / pilot holes
1-800-821-3944 www.siouxchief.com
#IS-821QA SQUARE ADAPTER INSTRUCTION SHEET
© 2011 SIOUX CHIEF MFG.
Always be aware of, and follow local plumbing codes
Failure to follow these instructions could result in personal injury or property damage
Converts round shower drain head/strainer to square
Designed for use with Sioux Chief 821 Series shower pan drains
Not for use with other types of shower drains
AB
1. Remove round strainer from drain head.
2. Set the square adapter on the drain head
and align the two screw holes with the screw
receivers in drain head.
3. Using screws provided (machine screws
for heads with brass thread inserts,
standard screws for no inserts) fasten the
square adapter to the drain head.
4. Snap strainer in place with four strainer
legs in contact with four receivers in drain
head and remove protective fi lm.
TIP: If strainer is loose, the strainer legs can
be bent slightly (with pliers) to provide more
(or less, if diffi cult to snap in) contact with
receivers.
5. If screws are visible through strainer
after installation, turn strainer 90° and
re-set.
Square Strainer & Adapter
Installation Instructions
A: Use machine screws for heads
with brass thread inserts
B: Use standard screws for heads
with no inserts / pilot holes
1-800-821-3944 www.siouxchief.com
#IS-821QA SQUARE ADAPTER INSTRUCTION SHEET
© 2011 SIOUX CHIEF MFG.
Always be aware of, and follow local plumbing codes
Failure to follow these instructions could result in personal injury or property damage
Converts round shower drain head/strainer to square
Designed for use with Sioux Chief 821 Series shower pan drains
Not for use with other types of shower drains
AB
1. Remove round strainer from drain head.
2. Set the square adapter on the drain head
and align the two screw holes with the screw
receivers in drain head.
3. Using screws provided (machine screws
for heads with brass thread inserts,
standard screws for no inserts) fasten the
square adapter to the drain head.
4. Snap strainer in place with four strainer
legs in contact with four receivers in drain
head and remove protective fi lm.
TIP: If strainer is loose, the strainer legs can
be bent slightly (with pliers) to provide more
(or less, if diffi cult to snap in) contact with
receivers.
5. If screws are visible through strainer
after installation, turn strainer 90° and
re-set.
Square Strainer & Adapter
Installation Instructions
A: Use machine screws for heads
with brass thread inserts
B: Use standard screws for heads
with no inserts / pilot holes
1-800-821-3944 www.siouxchief.com
#IS-821QA SQUARE ADAPTER INSTRUCTION SHEET
© 2011 SIOUX CHIEF MFG.
Always be aware of, and follow local plumbing codes
Failure to follow these instructions could result in personal injury or property damage
Converts round shower drain head/strainer to square
Designed for use with Sioux Chief 821 Series shower pan drains
Not for use with other types of shower drains
AB
1. Remove round strainer from drain head.
2. Set the square adapter on the drain head
and align the two screw holes with the screw
receivers in drain head.
3. Using screws provided (machine screws
for heads with brass thread inserts,
standard screws for no inserts) fasten the
square adapter to the drain head.
4. Snap strainer in place with four strainer
legs in contact with four receivers in drain
head and remove protective fi lm.
TIP: If strainer is loose, the strainer legs can
be bent slightly (with pliers) to provide more
(or less, if diffi cult to snap in) contact with
receivers.
5. If screws are visible through strainer
after installation, turn strainer 90° and
re-set.
Square Strainer & Adapter
Installation Instructions
A: Use machine screws for heads
with brass thread inserts
B: Use standard screws for heads
with no inserts / pilot holes
1-800-821-3944 www.siouxchief.com
#IS-821QA SQUARE ADAPTER INSTRUCTION SHEET
© 2011 SIOUX CHIEF MFG.
Always be aware of, and follow local plumbing codes
Failure to follow these instructions could result in personal injury or property damage
Converts round shower drain head/strainer to square
Designed for use with Sioux Chief 821 Series shower pan drains
Not for use with other types of shower drains
AB
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
FlexStone FLXSBC4834WH Operating instructions
-
FlexStone FLXSBL6032SS Installation guide
-
FlexStone FLXSBC6036GB Operating instructions
-
Infinity Drain STIF AS 6596 PS Installation guide
-
Kohler 923-BN User manual
-
-
Infinity Drain FXAS 6560 BK Installation guide
-
Oatey 427834 User manual
-
Oatey 423212 Specification
-
Jackson / Dalton Dishwasher 10AB-4SH User manual
