Netgear XSM96GSKT-100EUS Datasheet
- Category
- Network switches
- Type
- Datasheet
This manual is also suitable for
The Netgear XSM96GSKT-100EUS is a powerful managed switch starter kit designed for businesses seeking reliable, affordable, and simple 10 Gigabit Ethernet backbone architectures. With its advanced features, this kit enables organizations to enhance their network connectivity and performance.
Key capabilities of the Netgear XSM96GSKT-100EUS:
-
10 Gigabit Virtual Chassis stacking technology: Allows up to 4 independent switches to be consolidated under a single management IP, simplifying network operations and creating a resilient network architecture.
-
10 Gigabit Distributed Link Aggregation: Provides redundant uplinks without creating loops, ensuring greater bandwidth between network layers and maximizing redundancy.
The Netgear XSM96GSKT-100EUS is a powerful managed switch starter kit designed for businesses seeking reliable, affordable, and simple 10 Gigabit Ethernet backbone architectures. With its advanced features, this kit enables organizations to enhance their network connectivity and performance.
Key capabilities of the Netgear XSM96GSKT-100EUS:
-
10 Gigabit Virtual Chassis stacking technology: Allows up to 4 independent switches to be consolidated under a single management IP, simplifying network operations and creating a resilient network architecture.
-
10 Gigabit Distributed Link Aggregation: Provides redundant uplinks without creating loops, ensuring greater bandwidth between network layers and maximizing redundancy.
10 Gigabit Aggregation and Next-Gen Edge
96-Port Managed Switch Starter Kits
Mid-sized businesses, hospitals and schools have the same bandwidth needs as
large enterprises. With the wide adoption of virtualization, audio-video-data conver-
gence, and rapid growth of bandwidth intensive applications, there is a continued
demand for faster network connectivity. The widespread deployment of Gigabit to the
desktop is becoming a bottleneck for any network access layer.
10 Gigabit Ethernet represents the solution to many of the scaling challenges
presented by the edge of today’s networks. Successful 10 Gigabit Ethernet deploy-
ments require intelligent switching solutions with integrated security, high availability,
delivery optimization, enhanced manageability, and support for new applications.
NETGEAR ProSafe
®
10 Gigabit Aggregation and Next-Gen Edge Managed switches
are ideal for all organizations considering reliable, affordable and simple 10 Gigabit
Ethernet backbone architectures.
10 Gigabit Virtual Chassis stacking technology and 10 Gigabit Distributed link
aggregation present an opportunity to scale both the entire network’s performance
and its redundancy. Get started today with these special starter kit promotions. But
hurry as quantities are limited!
Managed infrastructure
Promotion valid until 31st March 2012
XSM96PSKT
XSM96GSKT
(See details page 2)
30% INSTANT SAVINGS
XSM96PSKT
96-Port PoE L2+ Managed Switch Starter Kit
Special Ordering SKU for the bundle:
XSM96PSKT-100NAS (Americas)
XSM96PSKT-100EUS (Europe)
XSM96PSKT-100AUS (Asia Pacific)
Components Description Quantity
XSM7224S NETGEAR ProSafe L2+ 10 Gigabit Managed Switch 1
24p SFP+ with stacking
GSM7252PS NETGEAR ProSafe L2+ Gigabit Managed Switch 2
48p PoE with 2 built-in SFP+ and 10GE stacking
AX742 NETGEAR ProSafe 24G Stacking Kit for GSM7xxxS series 2
(2 modules, 1 cable)
AXC763 NETGEAR ProSafe 3m Direct Attach SFP+ to SFP+ Cable 2
AXM763 NETGEAR ProSafe 10GBase-LRM SFP+ LC Optics (long reach 2
multimode, 220m OM1 62.5μm/125μm or OM3 50/125μm)
Components Description Quantity
XSM7224S NETGEAR ProSafe L2+ 10 Gigabit Managed Switch 1
24p SFP+ with stacking
GSM7352S NETGEAR ProSafe L3 Gigabit Managed Switch 2
48p with 2 built-in SFP+ and 10GE stacking
AX742 NETGEAR ProSafe 24G Stacking Kit for GSM7xxxS series 2
(2 modules, 1 cable)
AXC763 NETGEAR ProSafe 3m Direct Attach SFP+ to SFP+ Cable 2
AXM763 NETGEAR ProSafe 10GBase-LRM SFP+ LC Optics (long reach 2
multimode, 220m OM1 62.5μm/125μm or OM3 50/125μm)
XSM96GSKT
96-Port L3 Managed Switch Starter Kit
Special Ordering SKU for the bundle:
XSM96GSKT-100NAS (Americas)
XSM96GSKT-100EUS (Europe)
XSM96GSKT-100AUS (Asia Pacific)
C
O
LL
A
P
S
E
D
A
G
G
R
E
G
A
T
I
O
N
/
A
C
C
E
S
S
L
A
Y
E
R
A
G
G
R
E
G
A
T
I
O
N
LA
Y
E
R
A
C
C
E
S
S
L
A
Y
E
R
Speed
GSM7352S
Power
Reset
Fan
RPS
ID
M1
M2
USB
Combo Ports
49
50
2
1
4
3
6
5
8
7
10
9
12
11
14
13
16
15
18
17
20
19
22
21
24
23
26
25
28
27
30
29
32
31
34
33
36
35
38
37
40
39
42
41
44
43 45T
48T
47T
46T
Off =
No Li nk
Gree n =
10G Link
Blink =
ACT
SFP+
Yellow=Link at 10/100M Green=Link at 1G Blink=ACT
45F
46F
47F
48F
Stack
Master
Link/Act
Speed
GSM7352S
Power
Reset
Fan
RPS
ID
M1
M2
USB
Combo Ports
49
50
2
1
4
3
6
5
8
7
10
9
12
11
14
13
16
15
18
17
20
19
22
21
24
23
26
25
28
27
30
29
32
31
34
33
36
35
38
37
40
39
42
41
44
43 45T
48T
47T
46T
Off =
No Li nk
Gree n =
10G Link
Blink =
ACT
SFP+
Yellow=Link at 10/100M Green=Link at 1G Blink=ACT
45F
46F
47F
48F
Stack
Master
Link/Act
XSM7224S
Reset
ID
Power 2
Power 1
USB
Combo Ports
Fan
Stack
Mast er
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21F
22F
23F
24F
21T 22T 23T 24T
Console 9600,N.8,1
Port 21T-24T
Left side LED : Blink=Act
Off=No Link
Green=Link at 10G
Yellow=Link at 1G
Right side LED: Blink=Act
Off=No Link
Yellow=Link at 10/100M
GS M7252PS
PoE Speed/Lnk/Act
GSM7252P S
Link/Act Mode Y ellow=Link at 10/100M Green=Link at 1G Blink=ACT
PoE Speed/Lnk/Act
GSM7252PS
Link/Act Mode Y ellow=Link at 10/100M Green=Link at 1G Blink=ACT
XSM7224S
Reset
ID
Power 2
Power 1
USB
Combo Ports
Fan
Stack
Mast er
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21F
22F
23F
24F
21T 22T 23 T 24 T
Console 9600,N.8,1
Port 21T-24T
Left side LED: Blink=Act
Off=No Link
Green=Link at 10G
Yellow=Link at 1G
Right side LED: Blink=Act
Off=No Link
Yellow=Link at 10/100M
4
3
2
1
5
A
6
B
7
8
9
10
XCM8810
Model No.: 60020 700W/1200W
100-240 VAC, 60/50 Hz, 10A
Model No.: 60020 700W/1200W
100-240 VAC, 60/50 Hz, 10A
Model No.: 60020 700W/1200W
100-240 VAC, 60/50 Hz, 10A
Model No.: 60020 700W/1200W
100- 240 VAC, 60/5 0 Hz, 10 A
Model No.: 60020 700W/1200W
100-240 VAC, 60/50 Hz, 10A
Model No.: 60020 700W/1200W
100-240 VAC, 60/50 Hz, 10A
XSM7224S and GS M7352S
XCM8810
BACKBONE – BUILDING 1
2.4
GHz GHz
5
BACKBONE – BUILDING 2
XSM7224S
WIRING CLOSET – BUILDING 2
Fiber, 10GBase-LR single mode
Fiber, 10GBase-LRM multimode
Copper, Gigabit RJ45
XCM8848T
1
25
2
26
3
27
4
28
5
29
6
30
7
31
8
32
9
33
10
34
11
35
12
36
13
37
14
38
15
39
16
40
17
41
18
42
19
43
20
44
21
45
22
46
23
47
24
48
XCM88S1
Compact Flash Console MGMT
ADR
SYS
MSTR
ERR
ENV
XCM88S1
Compact Flash Console MGM T
ADR
SYS
MSTR
ERR
ENV
XCM8808X
12345678
XCM8808X
12345678
XCM8824F
113 1421531641751867192082192210 2311 2412
XCM8848T
1
25
2
26
3
27
4
28
5
29
6
30
7
31
8
32
9
33
10
34
11
35
12
36
13
37
14
38
15
39
16
40
17
41
18
42
19
43
20
44
21
45
22
46
23
47
24
48
XCM8848T
1
25
2
26
3
27
4
28
5
29
6
30
7
31
8
32
9
33
10
34
11
35
12
36
13
37
14
38
15
39
16
40
17
41
18
42
19
43
20
44
21
45
22
46
23
47
24
48
XCM8824F
113 1421531641751867192082192210 2311 2412
XCM8824F
113 1421531641751867192082192210 2311 2412
Copper, Gigabit PoE RJ45
Copper, 10GE SFP+ DAC Cable
Fiber, 10GBase-SR multimode
GSM7252PS
Servers, Storage
C
OR
ELA
YER
A Complete and Secure Solution
NETGEAR ProSafe
®
10 Gigabit Aggregation and Next-Gen
Edge solution offers a secure, future-proof networking
infrastructure. End-users, critical services, servers and storage
seamlessly connect across highly flexible core, distribution and
access layers. NETGEAR Managed Infrastructure makes the
most of state-of-the-art technologies including Virtual Chassis
Stacking and Distributed Link Aggregations that work in
concert to create a reliable, simple and affordable Campus
LAN solution.
A single-pane-of-glass management platform – NMS200 –
increases overall operational efficiency.
Building 1: XSM96GSKT
For a collapsed Aggregation/Edge application, the
XSM96GSKT starter kit comes with 24 Gigabit stacking kits
for the two GSM7352S: the virtual chassis enables single,
common fabric manageability. Starter kit also comes with
DAC SFP+ cables for increased network resilience: the
XSM7224S can further boost performance by bundling
(trunking) several parallel 10 Gigabit links and connecting
the virtual GSM chassis with LACP load balancing and
automatic failover.
Building 2: XSM96PSKT
For a distributed Edge application, the XSM96PSKT starter kit
comes with multimode SFP+ optics for the two GSM7252PS: a
resilient 10 Gigabit distribution to a virtual chassis at the edge
increases flexibility and reduces operational complexity.
NMS200
www.netgear.com
Virtual Chassis Stacking Technology
Technology Overview
NETGEAR Virtual Chassis stacking technology provides resilient network architecture: up to 8 independent switches (GSM7xxxS series) or up to 4 independent switches
(XSM7xxxS series) are consolidated around a single management IP address, which simplifies network operations.
The stack acts as a single switch in the network:
• One CLI and one web interface managing the virtual chassis
• The other switches in the network also “see” the stack as a virtual chassis
• The virtual chassis needs only one configuration file, similar to a typical modular
chassis switch
NETGEAR Virtual Chassis stacking technology is flexible:
• GSM7xxxS series switches intelligently join the Virtual Chassis architecture with a 48-Gbps
switching stack interconnect, when using local AX742 stacking kits
• 10 Gigabit fiber is also available for distant GSM7xxxS – local and distant switches can
join the same stack
• XSM7xxxS series switches are even more flexible: all ports are Stack capable – you can
use up to 4 ports per stack interconnect to create a 80Gbps Stacking backplane
NETGEAR Virtual Chassis stacking technology delivers a bidirectional, highly resilient topology:
• Higher throughput capacity with lower latency and jitter for VoIP and Multicast traffic
• Each switch in the stack understands the shortest path to forward traffic, bi-directionally
both up and down
• Dual ring architecture ensures that if a switch fails within the stack, all others switches
can still communicate with one another
Virtual Chassis Functionality
Within the stack, a switch is elected as the “Master”: the master is responsible for the control plane and forwarding/routing
tables for the stack members. Automatic Unit Replacement guarantees stack members’ smooth replacement without manual
reconfiguration. Stack master redundancy is also automatic. As for a Chassis switch, VLAN tagging, port mirroring and link
aggregation are available from every port to every port across the stack.
Distributed Link Aggregation
Distributed trunking across the stack allows redundant uplinks without creating loops: LACP automatic load-balancing and port failover ensure greater bandwidth between
network layers and maximize redundancy. Active-active connections radically improve performance for servers at the same time. NETGEAR Virtual Chassis stacking technology
delivers resiliency, simplicity and better performance throughout the entire network.
work
operations.
a
ne and forwardin
g
/routin
g
e
placement without manual
g
in
g,
p
ort mirrorin
g
and link
Competitive Summary
NETGEAR ProSafe 10 Gigabit Aggregation and Next-Gen Edge starter kits efficiently compete against HP Networking 5400zl and 8200zl series:
• Virtual Chassis stacking technology allows for highly resilient stacking topology while the HP 5400zl doesn’t provide fabric/management redundancy
• NETGEAR Starter Kits provide equal or better features with up to 30% savings compared to HP
• NETGEAR Starter Kits come with a 24-port 10 Gigabit Aggregation switch (XSM7224S) – a $8,000 value!
Estimated street price (www.cdw.com) $12,300 $13,300 $17,800
HARDWARE FEATURES:
Gigabit RJ45 ports in this bundle 96 PoE (including 16 PoE+) 92 PoE/PoE+ 92 PoE/PoE+
Gigabit SFP ports in this bundle 8 SFP 0 0
10 Gigabit ports in this bundle 4 SFP+ and 24 SFP+ aggregation layer 2 SFP+ 2 SFP+
Max. Gigabit port density/1 IP 384 PoE / Non-PoE 284 PoE / Non-PoE 288 PoE / Non-PoE
Fabric redundancy Yes – redundant fabric / management No redundancy Yes – redundant fabric / management
(Virtual Chassis stacking technology)
Backplane access 48 Gbps per unit in the stack 48 Gbps per blade in the chassis 48 Gbps per blade in the chassis
SOFTWARE FEATURES:
L2 / L3 / L4 ACLs and QoS Yes Yes Yes
Lite-L3 routing Yes, Static Routing Yes, Static Routing Yes, Static Routing
Dynamic routing RIP, VRRP, OSPF with L3 license RIP, VRRP, OSPF RIP, VRRP, OSPF
or when one GSM73xxS in the stack
Multicast L2 filtering IGMP Snooping, Querier IGMP Snooping IGMP Snooping
Multicast L3 routing PIM-DM and PIM-SM with L3 license PIM-DM, PIM-SM PIM-DM, PIM-SM
or when one GSM73xxS in the stack
IPv6 Management Yes Yes Yes
IPv6 Full Support Yes with L3 license Yes Yes
or when one GSM73xxS in the stack
AGGREGATION LAYER:
24-port 10 Gigabit Aggregation? Yes – one XSM7224S in the bundle No No
NETGEAR
XSM96PSKT
HP
5412-92G-PoE+-2XG
v2 zl (J9532A)
HP
8212-92G-PoE+-2XG
v2 zl (J9639A)
Example for PoE:
www.netgear.com
Starter Kits: possible options and upgrades
10 Gigabit Aggregation
XSM7224S NETGEAR ProSafe L2+ 10 Gigabit Managed Switch - 24p SFP+ with stacking
XSM7224L NETGEAR ProSafe Layer 3 License Upgrade for XSM7224S
Next-Gen Edge, Gigabit
GSM7228PS NETGEAR ProSafe L2+ Gigabit Managed Switch - 24p PoE with 2 built-in SFP+ and 10GE stacking
GSM7228PL NETGEAR ProSafe Layer 3 License Upgrade for GSM7228PS
GSM7252PS NETGEAR ProSafe L2+ Gigabit Managed Switch - 48p PoE with 2 built-in SFP+ and 10GE stacking
GSM7252PL NETGEAR ProSafe Layer 3 License Upgrade for GSM7252PS
GSM7328S NETGEAR ProSafe L3 Gigabit Managed Switch - 24p with 2 built-in SFP+ and 10GE stacking
GSM7352S NETGEAR ProSafe L3 Gigabit Managed Switch - 48p with 2 built-in SFP+ and 10GE stacking
GSM7328FS NETGEAR ProSafe L3 Gigabit Managed Switch - 24p Fiber with 10GE stacking
Modules – Redundancy and Availability
APS300W NETGEAR ProSafe Additional Redundant Power Supply for XSM7224S
AFT200 NETGEAR ProSafe Replacement Fan Tray for XSM7224S
RPS5412 Optimal Power External Redundant Power Supply for GSM72 and GSM73 Series
APS525W NETGEAR ProSafe Extractible Power Supply for GSM7228PS and GSM7252PS Series
APS135W NETGEAR ProSafe Extractible Power Supply for GSM7328S and GSM7352S Series
Modules – Optics and Cables
AXM761 NETGEAR ProSafe 10GBase-SR SFP+ LC Optics (multimode, 300m OM3 50/125μm, 33m OM1 62.5/125μm)
AXM763 NETGEAR ProSafe 10GBase-LRM SFP+ LC Optics (long reach multimode, 220m OM1 62.5/125μm or OM3 50/125μm)
AXM762 NETGEAR ProSafe 10GBase-LR SFP+ LC Optics (single mode, 10km 9/125μm)
AXC761 NETGEAR ProSafe 1m Direct Attach SFP+ to SFP+ Cable
AXC763 NETGEAR ProSafe 3m Direct Attach SFP+ to SFP+ Cable
AXC753 NETGEAR ProSafe 3m Direct Attach XFP to SFP+ Cable
AX742 NETGEAR ProSafe 24G Stacking Kit for GSM7xxxS series (2 modules, 1 cable)
AGM734 NETGEAR ProSafe 1000BaseT SFP RJ45 GBIC (for Gigabit RJ45 connectivity across all XSM7224S SFP+ ports)
AGM731F NETGEAR ProSafe 1000Base-SX SFP LC GBIC (multimode, 550m OM3 50/125μm, 275m OM1 62.5/125μm)
AGM732F NETGEAR ProSafe 1000Base-LX SFP LC GBIC (single mode, 10km 9/125μm)
* The Lifetime Hardware Warranty only covers hardware, fans, and internal power supplies, and do not include external power supplies or software.Hardware modifications or customization void the warranty. The warranty is only valid for the original purchaser and cannot be transferred.
NETGEAR reserves the right to terminate this promotion anytime without prior notice.
NETGEAR, the NETGEAR Logo, Connect with Innovation and ProSafe are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Other brands and product names are trademarks of their respective holders.
Information is subject to change without notice. © 2011 NETGEAR, Inc. All rights reserved.
-
1
-
2
Netgear XSM96GSKT-100EUS Datasheet
- Category
- Network switches
- Type
- Datasheet
- This manual is also suitable for
The Netgear XSM96GSKT-100EUS is a powerful managed switch starter kit designed for businesses seeking reliable, affordable, and simple 10 Gigabit Ethernet backbone architectures. With its advanced features, this kit enables organizations to enhance their network connectivity and performance.
Key capabilities of the Netgear XSM96GSKT-100EUS:
-
10 Gigabit Virtual Chassis stacking technology: Allows up to 4 independent switches to be consolidated under a single management IP, simplifying network operations and creating a resilient network architecture.
-
10 Gigabit Distributed Link Aggregation: Provides redundant uplinks without creating loops, ensuring greater bandwidth between network layers and maximizing redundancy.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Netgear GSM7328FL-10000S Datasheet
-
-
-
-
-
-
Netgear GSM7352S - ProSafe Switch - Stackable Datasheet
-
-
-
Other documents
-
Add-On Computer Peripherals (ACP) ADD-PCIE-2SFP+ Datasheet
-
Savant SS728P-24X4F Deployment Guide
-
MikroTik CRS226-24G-2S+RM Datasheet
-
Dell W-7200 Installation guide
-
Hored S5700-24G-4F-4TF User manual
-
-
Hored S5700-24G-24F-4TF User manual
-
HP Series 8212zl User manual
-
