George Kovacs P1243-566-L User manual

Brand
George Kovacs
Model
P1243-566-L
Type
User manual
INSTALLATION INSTRUCTIONS
FOR P1243-566-L
For Wall Mount Fixture Outdoor
W A R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
A V E R T I S S E M E N T ! C O U P E R L E C O U R A N T A U N I V E A U D E S F U S I B L E S O U D O D I S J O N C T E U R
Page: 1/1
Fig. 2
PREPARING FOR INSTALLATION (Fig. 1)
1. Shut off power at the fuse box or circuit breaker box and
remove the old fixture including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the parts in a
clear area. Take care not to misplace any small parts
necessary for installation.
SUGGESTED INSTALLATION (Fig. 1)
3. Remove the two mounting screws (DD) and washers (EE)
from the side of the fixture body (B) and remove the canopy
(A).
4. Remove the two screws (FF) from the front of the canopy (A)
and remove the mounting plate (BB).
5. Secure the mounting plate (BB) to the outlet box (not included)
with the outlet box screws (CC).
Note: the side of mounting plate marked “GND” must face out.
CONNECTING THE WIRES (Fig. 2)
6. Connect the electrical wires as shown in Fig.2 making sure
that all wire connectors are secured. If your outlet box has
a ground wire (green or bare copper), connect the fixture’s
ground wire to it. Otherwise, connect the fixture’s ground
wire directly to the mounting plate (BB) using the green
screw (AA) provided. Tuck wires neatly back into the outlet
box.
COMPLETING THE INSTALLATION (Fig. 1)
7. Attach the canopy (A) to the mounting plate (BB) and secure
it with the screws (FF).
8. Attach the fixture body (B) to the canopy (A) and secure it with
the mounting screws (DD) and washers (EE).
9. Adjust the fins (C) to the suitable angle you need.
Your installation is now complete. Return power to the junction
box and test the fixture.
IMPORTANT: Fixture should be installed by a qualified electrician to
ensure proper wiring and installation.
Dimmable with ELV and/or LED compatible wall dimmer switches.
.
Fig.1
set# A-020
- Mounting plate
- Ground screw
- Mounting screws*2pcs
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green
(Ground)
  • Page 1 1

George Kovacs P1243-566-L User manual

Brand
George Kovacs
Model
P1243-566-L
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents