2. New Classic FURNITURE
  3. Andover

New Classic FURNITURE Andover Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the New Classic Furniture Andover Dresser (B677-050, B677-052) and Mirror (B677-060). This document outlines the process for assembling the dresser and attaching its mirror, including a step-by-step guide for securing the mirror support. I'm ready to answer any questions you have about the assembly process, parts, or any other information needed.
  • What is the first step in assembling the mirror?
    What hardware components are used in the first assembly step?
    How often should the screws be checked and tightened?
ASSEMBLY INSTRUCTIONS
NOTE:MUST TIGHTEN SCREW PERIODICALLY.WITH USE SCREWS WILL
BECOME LOOSE CHECK THIGHT OF ALL SREWS EVERY 6-8 WEEKS. MADE IN MALAYSIA
STEP 1
COMPLETED
ASSEMBLY
Step 1 :Attach and tighten the
Mirror Support (3) to the Dresser (1)
and Mirror frame (2) at back, insert
JCBC (M6) With Washer (A+B+C)
as shown.
3
2
3
1
ITEM DRAWING DESCRIPTION QTY
DOOR
DRESSER
MIRROR
MIRROR
SUPPORT
A+B+C
D
PARTS LIST
1
2
3
1 PC
1 PC
2 PCS
B677-050 ANDOVER DRESSER
B677-052 ANDOVER DRESSER 6 DRAWER
B677-060 ANDOVER MIRROR
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which
may have come loose inside the carton during shipment. Identify and count all items and compare with the parts list
and/or hardware list shown below.
A
HARDWARD LIST
ITEM DRAWING DESCRIPTION QTY
B
8 PCS
C
Spring Washer
M6 x12mm 8 PCS
D
Flat Washer
M6 x 12mm 8 PCS
1 PC
JCBB (M6)
6 x 35MM
ALLEN KEY M4
4 x 35 x65MM
COMPLETED
ASSEMBLY
DRESSER
6 DRAWER 1 PC
/